Add control for the 1.2V enable pin in VCM to comply the mipi camera
power sequence.
2.8V enable --> 1.2V enable --> reset
BUG=b:362386165
TEST=Run ITS test
Change-Id: I495b2e266ee3d24ed3334bb9c173b3993d095e8e
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84211
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Power consumption according to RTS5227 datasheet section 6.4, L0s is not supported, so set it to ASPM_L1.
lspci -vvvv -s 01:00 to verify LnkCtl: ASPM L1 Enabled.
BUG=b:359409425
TEST=emerge-brox sys-boot/coreboot sys-boot/chromeos-bootimage
Change-Id: I87bb0d195566d273951dee6eeb54c9b388dd7607
Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84177
Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Update PL1 Min value from 6W to 15W based on the brox thermal cooling
capacity and hardware design.
BUG=None
BRANCH=None
TEST=Build and boot on brox board
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Change-Id: I266a78806e065bf7af0d5fcad9b22ab63aa892e2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83661
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
There are one too many acpigen_pop_len calls in the code
to generate the ROTM; remove one to fix an EMERG warning:
[EMERG] ASSERTION_ERROR: file `src/acpi/acpigen.c`, line 38
The extra acpigen_pop_len() call was added commit
45d2c3d543 ("i2c/drivers/generic: Return ROTM in a package").
Change-Id: I913022144813f7f65eac1bcb7c97656f2c513c0b
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84197
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
iasl refuses to perform an arithmetic computation in a QWordMemory
parameter and fails with the following error.
dsdt.asl 2149: 0x4010800000, ((0x4010800000 + 0x10000) - 1), 0x0,
Error 6051 - ^ Address Min is greater than Address Max
This commit replaces the arithmetic with the result to define
IOM_BASE_ADDR_MAX.
BUG=b:348678529
TEST=Build for google/fatcat mainboard.
Change-Id: Ia5cf899b049cb8eb27b4ea30c7f3ce7a14884f16
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84216
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When world-facing camera is absent, coreboot need to enable
GPP_R6(DMIC_WCAM_CLK) and GPP_R7(DMIC_WCAM_DATA) for 3rd dmic support
BUG=b:333973512
TEST=Boot google/riven to OS and verify 3rd dmic working properly.
Change-Id: I6c8780ce37b5d3987f5cdf6e6e6d0b4896b33230
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84141
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Jayvik Desai <jayvik@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
With `probe unprovisioned` fw_config rule, there is no need to define an
explicit STORAGE_UNKNOWN option. Hence remove it.
BUG=None
TEST=Build Jubilant FW image.
Change-Id: I4f6ace4b39a1ee0b63486d3872b20c8da719ae4a
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84095
Reviewed-by: Bob Moragues <moragues@google.com>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use CONFIG_SOC_INTEL_COMMON_BLOCK_ACPI_HAVE_GPE1 to enable GPE1 block.
This will include GPE1 blocks to FADT with their info.
BUG=362310295
TEST=boot to OS and check that FADT table include GPE1.
FADT should have:
GPE1 Block Address : 00001810
GPE1 Block Length : 18
GPE1 Base Offset : 80
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: Ia6928c35b86f4a2243d58597b17b2a3a5f54271e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84103
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Introduces the BIT_FLAG_32(x) macro to create a 32-bit mask with the
designated bit set. This ensures compatibility with the 32-bit
'GEN_PMCON_A' register on 64-bit systems, where 1ul is 64 bits wide and
could potentially cause an overflow when shifted beyond 31 bits.
Change-Id: I70be1ccba59d25af2ba85a2014232072abf2f87d
Signed-off-by: Saurabh Mishra <mishra.saurabh@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84142
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
This patch refactors ITSS related SoC specific macros by consolidating
them into a common itss.h file. This improves code maintainability and
reduces redundancy as each SoC previously defined the same macros.
Specific changes include:
- Move SoC specific ITSS macros into intelblocks/itss.h.
- SoC code now includes intelblocks/itss.h instead of the SoC-local
soc/itss.h.
- Drop soc/itss.h from static ASL files.
- Delete soc/itss.h from all SoC locals except Apollo Lake and
Sky Lake.
TEST=Able to build and boot google/hatch, google/xol and google/karis.
Change-Id: I6461dc93b0d21bec5429075bc26435bae3754d74
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84183
Reviewed-by: Jayvik Desai <jayvik@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tune I2C2 timing:
Set falling time to 250ns from 400ns to meet spec: "THIGH>0.6us"
BUG=b:362685374
TEST= Build jubilant firmware
Measure the i2c signal on jubilant to meet spec:
I2C2 THIGH from 0.494 us to 0.76 us
Change-Id: I42a60edc0b361bfabacf5376ef89f436efedb356
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84143
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Bob Moragues <moragues@google.com>
Reviewed-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
This patch removes the GPIO_IRQ_START and GPIO_IRQ_END definitions
from itss.h for Alder Lake, Cannon Lake, Elkhart Lake, Jasper Lake,
Meteor Lake and Tiger Lake. These definitions are no longer needed.
TEST=Able to build and boot google/xol and google/karis.
Change-Id: I60a08ba2c894fd1c1af6c6aef3ddc4a33ec63e76
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84182
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change removes the unused pch_handle_sideband() function from the
Meteor Lake platform code.
TEST=Able to build and boot google/rex.
Change-Id: Idd14748aa1d917d6e88d738541a737c04a2c6a15
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84189
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Modify the FP IRQ pin to GPP_D13 from GPP_F15 from HW change on EVT.
The design change to follow the brox's GPE0 routing, and the
FP wake source can be routed.
BUG=b:363166664
TEST= Build jubilant firmware
Change-Id: Ic4a7ca07eab0dab234ab025cf77bbb8093b6b9d1
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84124
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add initial support for the LattePanda Mu board, which features:
- Intel Alder Lake-N N100 processor
- Samsung K3LK7K70BM-BGCP, 8GB LPDDR5 memory
- Samsung KLMCG2UCTA-B041, 64GB eMMC storage
- SO-DIMM 260-pin connector for function expansion
This commit includes:
- Basic board configuration
- Memory initialization
- Essential I/O setup
- Used UEFITool NE alpha 68 (Nov 4 2023) to extract data.vbt file
from original BIOS
- BIOS download link: https://github.com/LattePandaTeam/LattePanda-Mu
located at "./Softwares/BIOS/DFLT/LP-BS-S70NC1R200-SR-A.bin.zip"
Test Environment:
- Carrier Board: Lite
- Payload: mrchromebox/edk2
- EDK2 Version: uefipayload_202309
Test result
Passed:
- Windows 11 boot from eMMC
- Install Ubuntu 24.04 on NVMe SSD
- Ubuntu 24.04 boot from NVMe SSD
- USB 3.0/2.0 functionality
- Realtek RTL8111H-CG-RH Ethernet
- HDMI Display
- Audio over HDMI work in Ubuntu 24.04
Known Issues:
- S3 sleep mode non-functional
- Power-on after shutdown requires power removal
- SuperIO UART not detected in Windows 11
- Audio over HDMI not work in Windows 11
- Windows 11 BSOD occurs with NVMe SSD installed:
- Stop code: Machine Check Exception
- NVMe SSD not working on Windows 11, except when:
- KDNet Debugging enabled on NIC during boot
- SSD becomes functional in this scenario
Change-Id: I79696bdd837a221860b32f54629212c3346dca66
Signed-off-by: KunYi Chen <kunyi.chen@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83719
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
De-assert PERST# at romstage to reduce the waiting time in ramstage.
Before
```
[INFO ] wait_perst_done: PCIe early PERST# de-assertion is not done,
de-assert PERST# now
[INFO ] mtk_pcie_domain_enable: PCIe link up success (47 tries)
```
After
```
[INFO ] wait_perst_done: PCIe early PERST# de-assertion is not done,
de-assert PERST# now
[DEBUG] wait_perst_asserted: 457568 us elapsed since assert PERST#
[DEBUG] wait_perst_done: 163413 us elapsed since de-assert PERST#
[INFO ] mtk_pcie_domain_enable: PCIe link up success (1 tries)
```
BUG=none
TEST=boot from NVMe
Change-Id: I3a73bd574ae8f9f4e624846ce8b901a7d2209e78
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84118
Reviewed-by: Jianjun Wang <jianjun.wang@mediatek.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Even we assert PRSET# early to save the delay between PERST# assertion
and de-assertion. MediaTek PCIe driver still takes 47ms waiting for PCIe
link up. (1ms delay for each try)
```
[INFO ] mtk_pcie_domain_enable: PCIe link up success (47 tries)
```
Refactor common/pcie.c and add mtk_pcie_deassert_perst for early PCIe
reset. So we can de-assert PERST# at early stage to improve the boot
time.
BUG=b:361728592
TEST=emerge-cherry coreboot
Change-Id: I008e95263bfaf0119353382c2d2ce5ce29c6a382
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84117
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jianjun Wang <jianjun.wang@mediatek.com>
Add support for creating a DSM Method for Intel Bluetooth that
is outlined in Intel's connectivity integrated guide (which has
no document number).
It supports two GUIDs:
Set Tile Activaction (2d19d3e1-5708-4696-bd5b-2c3dbae2d6a9)
BIT(0) Indicates whether the device supports other functions
BIT(1) Set Tile Activation
Check/Set Reset Delay (aa10f4e0-81ac-4233-abf6-3b2ac50e28d9)
BIT(0) Indicates whether the device supports other functions
BIT(1) Set Bluetooth reset timing
Change-Id: Icc18f867604876b27ced2ee4356e47b3aa6b4f74
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84133
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
On the non-vboot boot path, eSPI is configured as part of
fch_pre_init(), and we need to ensure that the mainboard sets the
eSPI GPIOs properly before the common SoC code performs eSPI init.
Use the mb_set_up_early_espi() function to set the eSPI GPIOs at
the correct time.
TEST=build/boot google/zork (morphius), verify keyboard functional.
Change-Id: I03efe6def37a018c3de410523be21bf008174e94
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84148
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Now that zork can boot without vboot, ensure that the GPIOs set in
verstage are programmed in bootblock on the non-vboot path.
The eSPI GPIOs will be set in a subsequent patch using
mb_set_up_early_espi() since setting them in
bootblock_mainboard_early_init() would be too late given when the
SoC eSPI init takes place.
TEST=build/boot google/zork (morphius) w/o vboot
Change-Id: I0bb49678b2d913c447d5bc761a6f0e00fca6334f
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84147
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Add a new fw config field for wifi category as WIFI_6_8852, which is
PCIe based. Also, enable WIFI_6_8852 for existing PCIe based wifi port
as well as bluetooth port.
BUG=b:356434907
BRANCH=NONE
TEST=Verified Wifi6 module detection
Change-Id: Ib6ba641c23cce7f1253022c9bb78b986b323bcaa
Signed-off-by: Jianeng Ceng <cengjianeng@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84138
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Qinghong Zeng <zengqinghong@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Panel CSOT MNB601LS1-3 will flicker once during enter Chrome login
screen, it is because it inserts 12 blank frames if it receives the
unmute in VB-ID.
Always override the mute in VB-ID to avoid Tcon EC detected the
audiomute_flag change.
BUG=b:360243615
BRANCH=firmware-nissa-15217.B
TEST:Verfied on Teliks and cannot reproduce the issue
Change-Id: Iff488f6844c717ef24069c7176e7b8dfb07d8abc
Signed-off-by: Jianeng Ceng <cengjianeng@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84137
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Qinghong Zeng <zengqinghong@huaqin.corp-partner.google.com>
CAPID_A, BDSM and BGSM registers may not exist on specific platform,
this patch add `HAVE_CAPID_A_REGISTER` and `HAVE_BDSM_BGSM_REGISTER`
to select them.
Change-Id: I4d1197b8b1071aefc2ea1ed2f707d769aabab5e4
Signed-off-by: Yuchi Chen <yuchi.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84108
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
mtk_pcie_reset can be shared with MT8196. So move it to common/pcie.c.
BUG=b:361728592
TEST=emerge-cherry coreboot
Change-Id: Ib540cf9cc568206a1e78306624f4df7c5631c128
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84115
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jianjun Wang <jianjun.wang@mediatek.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Currently pcie.c is built into ramstage only, where DEVTREE_CONST is an
empty macro, so there's no problem with that. However, if we would like
to include that file in pre-ramstage, then DEVTREE_CONST would be
'const', leading to the following build error:
```
src/soc/mediatek/common/pcie.c:104:26: error: assignment discards
'const' qualifier from pointer target type [-Werror=discarded-qualifiers]
104 | root_dev = pcidev_path_on_root(devfn);
| ^
```
BUG=none
TEST=emerge-cherry coreboot
Change-Id: Ia7c95424019ec0dca50bbc6be7f81b6180d06d6e
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84113
Reviewed-by: Jianjun Wang <jianjun.wang@mediatek.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Bluetooth driver in kernel requires reset-gpio in current resource
settings (_CRS) and device specific data (_DSD) ACPI objects. Hence
remove ACPI Power Resource for Bluetooth device so that the concerned
ACPI objects get populated.
BUG=b:362817900
TEST=Build Brox Firmware image and boot to OS. Ensure that the _CRS and
_DSP ACPI objects are filled in the SSDT with the required data.
Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings
{
GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly,
"\\_SB.PCI0.GPIO", 0x00, ResourceConsumer, ,
)
{ // Pin list
0x004D
}
})
Name (_DSD, Package (0x02) // _DSD: Device-Specific Data
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301") /* Device Properties for _DSD */,
Package (0x01)
{
Package (0x02)
{
"reset-gpio",
Package (0x04)
{
\_SB.PCI0.XHCI.RHUB.HS10,
Zero,
Zero,
One
}
}
}
})
Change-Id: If6e679aa3f4181e7963ac53d0847b1512959b3a7
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84135
Reviewed-by: Bob Moragues <moragues@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
The cw-al-4l-v1.0 mainboard has two USB2 ports on a 2x5 pin header on
the mainboard and likely also routes one USB2 port to the m.2 E key slot
which is typically used for Bluetooth support when an E key m.2 WIFI +
Bluetooth card is installed.
This is untested, since I only have the cw-al-4l-v2.0 mainboard, but
from looking at the documentation of the version 1 and looking at how
things are done on the version 2 this should be correct.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7059a3f2d9cde0086382a4484c09d5ef33dc906d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83910
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
- Add Kconfig: SOC_INTEL_COMMON_BLOCK_GPIO_16BIT_CPU_PORTID.
- Change cpu_port field to 16-bit width if the Kconfig is set.
BUG=none
TEST=boot to OS and use iotools to read the registers that use 16-bit
port ID such as IOM AUX Bias Ctrl register to verify the 16-bit group
ID field. The bit 15:8 of the returned port ID value should be 0xF2
instead of zero.
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: I8c1a48d587bd41178b0c6bb0144fda93e292423d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83981
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
1) Add all required changes for eSOL support.
2) Select MAINBOARD_USE_EARLY_LIBGFXINIT for Trulo.
The CSOT (MNC207QS1-1) panel is used for the devicetree.
BUG=b:362895813
TEST=On-screen text message seen during MRC training on Trulo SKU1.
MRC: no data in 'RW_MRC_CACHE'
bootmode is set to: 0
DP PHY mode status not complete
DP PHY mode status not complete
DP PHY mode status not complete
...
Informing user on-display of memory training
Change-Id: Ic34a8601b3084aa5f780d358fb0b15b7e820d375
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84128
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Amanda Hwang <amanda_hwang@compal.corp-partner.google.com>
Previously, `early_graphics_stop()` was skipped unconditionally if
`CONFIG(SOC_INTEL_CSE_LITE_SYNC_IN_RAMSTAGE)` was enabled. This led
to overlapping screens when CSE sync was not triggered in ramstage,
as both the eSOL message and the firmware splash screen would be
displayed.
This change refactors the condition for calling `early_graphics_stop()`
to ensure it is only skipped if a CSE firmware update is actually
required *and* `CONFIG(SOC_INTEL_CSE_LITE_SYNC_IN_RAMSTAGE)` is set.
This allows eSOL to display its message during CSE sync, but tears
down early graphics programming in other cases to prevent overlapping
screens.
Additionally, this change ensures that `early_graphics_stop()` is the
last function called by the romstage to guarantee proper cleanup.
BUG=b:362895813
TEST=Able to boot google/tivviks_ufs without overlapping screens.
Change-Id: Idc01bfc8963d65fcb0441300e7c9267eaaefefb9
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84144
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Amanda Hwang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
