On 1st and 2nd gen Xeon-SP the VTD PCI device is not at DEVFN 0.0.
Fix the DEVFN address and thus fix an assertion in vtd_probe_bar_size().
Change-Id: Ie879e95436af92fca1fee49135938ca2b005d579
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/85136
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Drop DMAR_X2APIC_OPT_OUT since coreboot is able to enable X2APIC.
TEST: Works fine on OCP/tiogapass, thus drop the opt out.
Change-Id: Ia0443a39a9bf392976cfd1a7ccf6a335d5f0bd70
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/85173
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Set _PXM in ACPI to indicate which socket the PCI domain belongs to.
TEST: Booted on 2S ocp/tiogapass and checked dmesg that PCI domains are
advertised in the correct Proximity Domain.
Change-Id: I39cec0307b0dce0a4da5df5be5095b8d90758997
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/85172
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Enable GBE and 10GBE region since it's used on vendor firmware.
TEST: Able to include gbe.bin and 10gbe.bin blobs into ROM.
Change-Id: Ia868d6b42e5e557d2abd60be4b2f318a1313b039
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/85171
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Currently coreboot hardcodes the same IOAPIC IDs as used on UEFI native,
however FSP does not program the IOAPIC IDs, except for PCH IOAPIC.
Drop existing code that hardcodes PCI addresses and IOAPIC IDs and
detect the IOAPIC inside the domain automatically, read the IOAPIC
base address and let existing code figure out the IOAPIC ID by reading
it back from HW.
Change-Id: I2543a46dcc4a98ec8629530ca87882a7106c9ed1
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84850
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Drop soc_get_stack_for_port() and move a comment.
Change-Id: I9d7615b633b344783150b3e1f3d98634630ed354
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84844
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
General Purpose Memory Range registers are only used if extended BIOS
region is enabled now, this patch wraps the related code with Kconfig
item `CONFIG_FAST_SPI_SUPPORTS_EXT_BIOS_WINDOW`.
Change-Id: I975840684b3dd9e9e76ec6a08de12d8dd3c8f08a
Signed-off-by: Yuchi Chen <yuchi.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/85041
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
ITSS has PCI Interrupt Route (PIR) registers to map PCI INTA-D to one
of PIRQA-H. This patch adds a function itss_get_dev_pirq() returning
PIRQ for a given device and INT pin.
Change-Id: If911b34c506a4a3657b873baab33814c1a7d674b
Signed-off-by: Yuchi Chen <yuchi.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/85012
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
The current design has the emit_wifi_sar_acpi_structures() function
load and unload the SAR binary. Since DSM and Bluetooth SAR data
structures are used outside this function, they are being copied into
data structure located in the calling function stack. This overhead is
unnecessary as loading and unloading the SAR binary could be done by
the calling function.
In addition, we are about to add several Bluetooth related data
structures which, under the current design, would require to add even
more data structure copy operations.
BUG=b:346600091
TEST=Wifi/Bluetooth SAR ACPI tables are identical before and after
this commit
Change-Id: Iebe95815c944d045f4cf686abcd1874a8a45e207
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84940
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
This change removes the GPIO configuration for Type C DP HPD, as the
Type C port does not require HPD setup.
BUG=b:366156678
TEST=Build and boot google/orisa. Test Type C port for external usb and
DisplayPort functionality.
Change-Id: I59ec5c19dbbd053bda25f4260321220524d785b3
Signed-off-by: Varun Upadhyay <varun.upadhyay@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/85181
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
This change removes the GPIO configuration for Type C DP HPD, as the
Type C port does not require HPD setup.
BUG=b:366156678
TEST=Build and boot google/trulo. Test Type C port for external usb and
DisplayPort functionality.
Change-Id: Iad602c9a15c65d37a37d06d486843f45e341b6bc
Signed-off-by: Varun Upadhyay <varun.upadhyay@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/85180
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
This patch calls `xhci_host_reset()` function to perform XHCI
controller reset. This is proactively pulled in to avoid any potential
timeouts when PMC sends an IPC command to disconnect the active USB
ports.
BUG=b:364158487
TEST=Build Brox BIOS image and boot to OS. Perform warm reset, cold
reset and suspend/resume cycle.
Change-Id: I33fd3aa13e81c7b1ae1ebf6674cc8ac1437ecc03
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/85141
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: <srinivas.kulkarni@intel.com>
Remove <assert.h> when it is not used.
Change-Id: Icb8ee7dcfd05e0a3131d02d1bc8fe150bbf9527b
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/85164
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
This to fix Wimplicit-function-declaration error:
src/soc/qualcomm/sc7280/socinfo.c:67:2: error: call to undeclared function 'die'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
67 | die("could not match jtagid\n");
| ^
src/soc/qualcomm/sc7280/socinfo.c:81:2: error: call to undeclared function 'die'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
81 | die("could not match jtagid\n");
| ^
Change-Id: If930e39d0c7231975c1a11179fa7dbd9fcc0d1d1
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/85166
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Properly scan all logical stack when creating PCI domains.
Fixes PCI bus ranges being used on other stacks, since they look
unused, as not all stacks are checked.
Change-Id: I13c8b389a585dbccec182d3c98021f1d9d648b2c
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/85138
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Do not enable SMIs on GPIOs since there's no SMI handler.
Without an SMI handler this will just slow down the platform once
the SMI asserts since it's never cleared. Once the protocol between
BMC and x86 has been implemented in an SMI handler, this can be reverted.
TEST: Booted on OCP/tiogapass without massive slowdown when SMIs are enabled.
Change-Id: If16c2c427f9b160f78a768a01a60128a6ed2c53f
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/85137
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Alicja Michalska <ahplka19@gmail.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
1. Select BOARD_GOOGLE_BASEBOARD_FATCAT for francka.
2. Set VARIANT_DIR to BOARD_GOOGLE_FRANCKA for francka.
3. Set TPM I2C bus to 0x01 for francka.
BUG=b:377819511
TEST=emerge-fatcat coreboot
Change-Id: I5890a1f02ef88c591973c71a2adb2bba889733e7
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/85115
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
GPE route for GPE0_DW0 was not being programmed (i.e. 0) which made it
route to GPP_B since a value of 0 means GPP_B. GPE route for GPE0_DW1
is also being programmed to GPP_B which makes the overall configuration
invalid.
The fix is to program the GPE0_DW0 route to a GPIO group which is not
already being used for GPE0_DW1 & GPE0_DW2 i.e. GPP_A.
Additionally, the common GPE route configuration is moved to baseboard.
BUG=b:378455259
TEST=Verify wake from S0ix when charger is connected
Change-Id: I674cf7db160b6bc1ec3d620f9c99ea91041c48bb
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/85157
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
This commit adds an assertion to ensure that the values of
pmc_/gpe0_dw0, pmc_/gpe0_dw1, and pmc_/gpe0_dw2 in the
soc_intel_<soc>_config structure are unique.
This check helps to catch potential configuration errors early on,
preventing unexpected behavior during system initialization.
TEST=Built and booted normally. No assertion failure observed.
Able to catch the hidden issue due to overlapping Tier 1 GPE
configuration.
[DEBUG] CPU: Intel(R) Core(TM) 3 N355
[DEBUG] CPU: ID b06e0, Alderlake-N Platform, ucode: 0000001a
[DEBUG] CPU: AES supported, TXT supported, VT supported
...
...
[DEBUG] MCH: device id 4617 (rev 00) is Alderlake-N
[DEBUG] PCH: device id 5481 (rev 00) is Alderlake-N SKU
[DEBUG] IGD: device id 46d3 (rev 00) is Twinlake GT1
[EMERG] ASSERTION ERROR: file 'src/soc/intel/alderlake/pmutil.c',
line 163
Change-Id: I6b4f2f90a858b9ec85145bce0542f1ce61d080be
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/85161
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
The lower_basic_mem_test_size SoC setting (LowerBasicMemTestSize UPD)
request FSP-M to reduce the size of memory tested after memory
training. This option reduces the boot time. This is considered a safe
option to enable on a well validated board.
BUG=b:357011633
TEST=LowerBasicMemTestSize UPD is set when lower_basic_mem_test_size
is set
Change-Id: I465e9c138ac8f2079bfd506add4667201a8fa533
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/85130
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
These acronyms have been found while looking at the datasheet of the
JH7110 RISC-V SOC.
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I82104b88e7723b73810f20d5f4dffe6ed8a9ab78
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83847
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Limit the ACPI OpRegion to cover only MBOX3. This seems to fix
BSOD errors seen on Windows 10/11 as reported at [1].
1: https://ticket.coreboot.org/issues/327
Change-Id: Ia2affa799e5cd84c0a03330e0f78919755f0e8ac
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81295
Reviewed-by: Joel Linn <jl_coreboot@conductive.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Add a helper function to identify PCI IOAPICs.
Will be used in the following commits.
Change-Id: Ibe50934260b025575440fd52eace73fe2327a193
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84849
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Update microcode on BSP before MPinit and on all APs if necessary.
When the APs already have a MCU loaded, MPinit will skip the update.
This aligns the code with other platforms that attempt to update the
microcode in MPinit even when FIT already has loaded a MCU.
Drop the UPD PcdCpuMicrocodePatchBase to prevent FSP-S from updating
MCU before MPinit runs.
Reduced code differences between SKX and CPX and will allow to
merge the codebase into one.
Change-Id: I7df6f82055a879a738fd29092e750084557bbd5c
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84848
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use Kconfig symbol CPU_BCLK_MHZ as done on CPX.
Reduced code differences between SKX and CPX and will allow to
merge the codebase into one.
Change-Id: I8a0a51d4280e4370e0e8695f8b9d8f2ed943d9e4
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84847
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Since SKX and CPX are using the PCH, copy the code from CPX and
lock the PMC in the same place.
Reduced code differences between SKX and CPX and will allow to
merge the codebase into one.
Change-Id: I9495456fc2650b25ba164b336dc10ea0b88989aa
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84846
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use get_platform_thread_count() instead of duplicated
get_thread_count(), that is also less precise.
Change-Id: I70c095c284aab6898b8351e82243f534963f333b
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84845
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Lock all PCU registers on all sockets. The same code can be found
on CPX, which is basically the same CPU. Once the differences between
CPX and SKX are minimal, the platforms can be merged into one codebase.
Change-Id: I73eaa0905e8a418fc9dfe515c42cd257c041cf61
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84843
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The Fn key on telith emits a scancode of 94 (0x5e).
BUG=b:372506691
TEST=Flash telith, boot to Linux kernel, and verify that KEY_FN is
generated when pressed using `evtest`.
Change-Id: Ib69af9a8448312b275de46f9c835f8a9d592312a
Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/85045
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
The DPTF parameters were defined by the thermal team.
Based on thermal table in 377955793#comment2
BUG=b:377955793
TEST=emerge-nissa coreboot chromeos-bootimage
Change-Id: I7cb44a707d7a87f5caaf259b069a21826f5c0a2e
Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/85114
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
This patch refactors the configuration of GPP_E07 (EC_SOC_INT_ODL) to
accommodate different hardware configurations.
Specifically, GPP_E07 is not connected (NC) on google/fatcat boards
with the Microchip EC AIC. However, it is required for google/fatcat
boards with Nuvoton/ITE AICs.
BUG=b:378603337
Change-Id: I540ba1feadc962866be16d44d2ad607fd0e97ad2
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/85106
Reviewed-by: Pranava Y N <pranavayn@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The current WWAN(LTE) does not require any sar setting from RF team's
suggestion, and sar sensor will be removed from DVT schematic.
To reserve the extendibility, add the fw_config DB_1A_LTE_SAR:
field DB_USB 11 12
option DB_1A 0 (None LTE)
option DB_1A_LTE 1 (LTE without sar sensor)
option DB_1A_LTE_SAR 2 (LTE with sar sensor)
end
Base on the fw_config to enable/disable related functions:
0)Disable WWAN and Sar if DB_USB = DB_1A
1)Enable WWAN and disable sar sensor if DB_USB = DB_1A_LTE
2)Enable WWAN and Sar sensor if DB_USB = DB_1A_LTE_SAR
BUG=b:375341992
TEST=Build and verify on jubilant by DB_USB= 0,1,and 2 of fw_config
Check sar sensor and WWAN module from commands:
ls -l /sys/bus/i2c/devices
i2cdetect -y -r
lsusb
Change-Id: If9231ac8df94e1dc514ecf0780c99adbfb902893
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/85107
Reviewed-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Add a scope parameter for `intel_write_pci0_PRT()` so that it could be
reused for multiple domains.
Change-Id: I867a0c74e633ddfe63d29870f9fd50ca883c2e78
Signed-off-by: Yuchi Chen <yuchi.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/85013
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
This will ensure that the user is informed about an ongoing CSE FW Sync.
BUG=b:378458829
TEST=Build Brox BIOS image and boot to OS. Ensure that ESOL is displayed
during CSE FW Sync.
Change-Id: I5e7b71da7a98be87361dc7ab9e6c4ae572f61773
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/85103
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
PRMRR (Protected Region Memory Range Region) are not accessible as
normal DRAM regions and needs to be explicitly reserved in memory
map.
Change-Id: I81d17b1376459510f7c0d43ba4b519b1f2bd3e1f
Signed-off-by: Gang Chen <gang.c.chen@intel.com>
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Signed-off-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84314
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Definitions of __fls/__ffs from lib.h and fms/fls from
cpu/x86/mtrr.h are duplicated. Use definition from lib.h which is
more generic.
Change-Id: Ic9c6f1027447b04627d7f21d777cbea142588093
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Suggested-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/85104
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When calculating the GPR0 protection range, currently the offsets of
"CSE data partition offset" and FPT are not checked. Invalid pointer
dereference may lead to segmentation fault.
Ensure the offset is within the image size before accessing the pointer.
Change-Id: Ic9557d8fc8ae9e4c12114ee170bfc90d5e149df9
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/85016
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Alexander Goncharov <chat@joursoir.net>
