Update gpio configuration for GPP_A08, GPP_E17, and GPP_F18 to
match ocelot schematic.
Change GPP_H16 (WWAN_PWR_EN) to GPP_E01 (EN_WWAN_PWR) in fw_config.c.
Change GPP_V06 and GPP_V11 to "No Connect" as they are test points.
Change trace names from "SNDW3_" to "SDW3_" to match names on ocelot
schematic.
BUG=b:412736286
BRANCH=None
TEST=`emerge-ocelot coreboot` and verify it compiles without error.
Change-Id: I8996dc1b2b0f85490d55a86dc2ca6a90c1604638
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/87750
Reviewed-by: Pranava Y N <pranavayn@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
To support the MTK firmware support package (FSP), reserve a 2MB region
in DRAM for loading `mtk_fsp_ramstage.elf` during ramstage.
BUG=b:379008996
BRANCH=none
TEST=build passed
Signed-off-by: Vince Liu <vince-wl.liu@mediatek.corp-partner.google.com>
Change-Id: If153d9746bea8c7faa8f9787029b44192c18899d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/87813
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Currently Francka cannot boot up immediately by pressing power button
when its power state is S5.
This patch fixes the power on process for this scenario.
BUG=b:419406610
BRANCH=none
TEST=Francka boots up immediately by pressing power button in S5.
Change-Id: I52fba7f58faa890955cd07728a6790520df29321
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/87807
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
This modification sets the HDA GPIO pin to NC by default.
Different audio configurations can be enabled via fw_config.
BUG=b:417133565
TEST=emerge-fatcat coreboot, HDA sound cards can be detected.
Change-Id: I0090a68d86de1067697d7efbb64c4638476c64ca
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/87810
Reviewed-by: Pranava Y N <pranavayn@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Enables CPU_SUPPORTS_INTEL_TME and TME_KEY_REGENERATION_ON_WARM_BOOT
for Panther Lake, providing hardware memory encryption capabilities.
TEST=Able to build and boot google/francka. Verified TME related
settings inside FSP are now enabled with this patch.
Change-Id: Iedc0d72d00e7e3c5b85916e2de4f020efd5ef024
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/87801
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
This commit moves the TME configuration into its own static function,
`fill_tme_params`, which is then called from
`fill_fspm_security_params`.
The `TME_KEY_REGENERATION_ON_WARM_BOOT` option is now supported,
allowing a new TME key to be generated on warm reboots.
This feature leverages the `SOC_INTEL_COMMON_BASECODE_RAMTOP`
configuration to determine a memory exclusion range for the new key.
Additionally, disable the `BIOS Guard` UPD as part of security FSP
UPD configuration.
TEST=Able to build and boot google/fatcat. S0ix also works with this
patch.
Change-Id: I1030a25262f1c3c24cf9f4886718689ee2c8155e
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/87808
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit adds a new timestamp, `TS_FIRMWARE_SPLASH_RENDERED`
(ID 557), to precisely mark the moment the firmware splash screen has
finished displaying.
The timestamp is recorded in `src/drivers/intel/fsp2_0/silicon_init.c`
within the `do_silicon_init` function. It's conditionally added based on
the platform's configuration:
- For platforms using FSP's native BMP rendering (prior to FSP 2.2, with
`CONFIG(BMP_LOGO)` and without
`CONFIG(USE_COREBOOT_FOR_BMP_RENDERING)`).
- For platforms where coreboot handles BMP rendering (`CONFIG(BMP_LOGO)`
and `CONFIG(USE_COREBOOT_FOR_BMP_RENDERING)`).
This enhancement provides better visibility into the boot process and
allows for more accurate performance analysis related to splash screen
display time.
BUG=b:418935715
TEST=Able to build and boot google/fatcat. Verified below details in
`cbmem -t`.
```
557:Firmware splash screen rendering finished 47,193,590 (2,235)
```
Change-Id: Ibef967dbc6e224741438e9708b42486ba03d0104
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/87812
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Set open-drain GPIOs for ChromeOS as input and bias-disable mode. Also
set AP_HDMI_RST_ODL to low, which is the only open-drain output pin.
BUG=b:397102113
BRANCH=none
TEST=build pass
Change-Id: I4375c25768de8f1462c491b2c84b9cf31f118126
Signed-off-by: Haikun Zhou <zhouhaikun5@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/87796
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Increase the CPU little core frequency from 1.6 GHz to 2.0 GHz to
speed up the boot process.
BUG=b:379008996
BRANCH=none
TEST=check little core cpu frequency is 2GHz in kernel by commands
clkdbg() { echo $@ > /proc/clkdbg ; cat /proc/clkdbg ; }
clkdbg fmeter
See the little core CPU frequency:
fm_armpll_ll_ck : 1999968
Signed-off-by: Zhigang Qin <zhigang.qin@mediatek.corp-partner.google.com>
Change-Id: I979f44e9340ea5bd733dc7f0fe47af47a4f403b7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/87795
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add support for VMODEM and VSRAM_MD buck converters in MT6359. These
buck converters are required for MT8189 to adjust voltage and CPU
frequency.
BUG=b:379008996
BRANCH=none
TEST=build passed.
Signed-off-by: Zhigang Qin <zhigang.qin@mediatek.corp-partner.google.com>
Change-Id: Ifdf43748a139050ec9fba50f918e071dc622a670
Reviewed-on: https://review.coreboot.org/c/coreboot/+/87799
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Currently on power key long press, PMIC will be reset. It would cause
an unwanted reset pulse in the power-off sequence. To match expected
sequence, change PMIC behavior to "force shutdown".
BUG=b:395848137
BRANCH=none
TEST=long-pressing power key doesn't trigger PMIC_AP_RST_L pulse
Change-Id: Ia8fb9f4a1ffe05955fca51a58468ba338ef8e12d
Signed-off-by: Haikun Zhou <zhouhaikun5@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/87798
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
GPIO_AP_SUSPEND_L is supposed to be high in S0, and low in S3. EC uses
this pin to determine the AP power state. This pin should be set as
early as possible in bootblock.
BUG=b:396030112
BRANCH=none
TEST=reboot pass. `powerinfo` shows S0 in EC console.
Change-Id: Ib7e9eaa19d232a37b3793bcbe268ba021e456ac7
Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/87793
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
SMI handler previously did not evaluate input slp_typ parameter and
apparently always acted as S3 was requested.
With the change keyboard is no longer a wakeup source from S4/S5, it is assumed MAINBOARD_EC_S5_WAKE attribute defined in ec.h is correct.
Change-Id: I54c7d7455a6737f731c65e57c91b6457643c7cb2
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74603
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Boris Mittelberg <bmbm@google.com>
Extracted from coreboot-Google_Teliks.15217.734.0.bin
Change-Id: I2c6b00ab0fc67b651256ec32d4d983b987435010
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/87557
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Extracted from coreboot-Google_Yaviks.15217.552.0.bin
TEST=build/boot yaviks/yavilla variant with working display.
Change-Id: I775baf4216eef2a60bc1ac034cef3c5c7c38ea69
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/87556
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Extracted from coreboot-Google_Pujjo.15217.460.0.bin.
TEST=build/boot pujjo1e variant with working display.
Change-Id: I82425bdbbba93197fb7b6f7a866412dc49066cdf
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/87555
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Eric Lai <ericllai@google.com>
To have the best usage case on 4GBx32 memory sku, the external display
resolution must not exceed 2560x1700. So use the GPP_E13 signal level
to determine x32 memory configuration and apply the corresponding VBT
accordingly.
BUG=b:415850768
TEST=Check the log for the string "Use vbt-uldrenite_x32mem.bin"
Cq-Depend: chrome-internal:8258325
Change-Id: I82a7415b4c99de9278e04f07a9efb0dfa0bf753d
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/87654
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
These variants were missing VBTs necessary for display init, so add
them. VBT files taken from the stock firmware images:
coreboot-Google_Dood.11297.368.0.bin
coreboot-Google_Foob.11297-169.0.bin
Since all variants other than the baseboard have VBTs, move the
selection of INTEL_GMA_HAVE_VBT to the baseboard and exclude the
octopus board.
TEST=build/boot various ocotpus variants, including dood/foob.
Change-Id: I67655b149de40e3e7f83971780f62cd7fce820c8
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/87774
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Needed for coolstar's IOM/TCSS drivers under Windows.
TEST=build/boot Win11 on google/screebo
Change-Id: Ib5a288d9b5d259c27f3b3b2b1b7b86e9c0e1f491
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/86822
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
On some older platforms (eg, google/link), setting the wake mask
before clearing the pending events will result in an immediate
wake from S3 sleep, so swap the ordering to ensure that doesn't
happen.
TEST=build/boot google/link, verify S3 sleep works properly.
Change-Id: I483dcfabd37a1f55fd0e56eed895f5b813f018d7
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/87576
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Update VBTs for both sarien and arcada variants from v221 to v228.
The current public CFL FSP uses/expects v228, and the older v221
causes a 180* rotation of the display at boot. Updating the VBT
to v228 fixes the issue. Also disable the fixed mode at boot
setting, so that the native panel resolution can be used by
the payload.
Settings were exported from the v221 VBTs using the Intel BMP tool,
and imported/applied to the sample VBT provided in the FSP repo.
TEST=build/boot google sarien w/edk2 payload, verify screen orientation
correct and native panel resolution used.
Change-Id: Ib6669fc535a197f961abdfcd10616c97a0573df2
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/87619
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch enhances the forced CSE sync mechanism by eliminating the
boot partition check for RO. It uses the persistent CMOS flags to
preserve the forced CSE update status across boots.
This patch also replaces the CSE status boolean variable with a bit
field to optimize CMOS memory utilization. Consequently, the remaining
bits can potentially be utilized for additional CSE states in future.
BUG=b:380220737
TEST=Verified forced CSE sync on google/rex0.
Change-Id: If1e4180cb5fec3990fdee2b0e412173b1c8c6ded
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/86153
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change moves pvmfw cbmem implementation to chromeos directory and
under CHROMEOS kconfig. The kconfigs have been renamed accordingly and
with this change CHROMEOS_PVMFW_CBMEM is enabled by default for
CHROMEOS.
BUG=b:410735713
TEST=The build with CONFIG_CHROMEOS=y allocates buffer for pvmfw, the
depthcharge adds the location and size of the buffer to the kernel
command line
Change-Id: I024f21ceee1334ebd7ae9bf1b897ad670ddc9ef9
Signed-off-by: Bartłomiej Grzesik <bgrzesik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/87763
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Resolve the issue that DP can only display on one side.
BUG=b:416842915
BRANCH=none
TEST=Build and boot to pujjocento. Verify typec works.
Change-Id: I55f2f28a0bdb052cafa05a98f51c8483fb343b8c
Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/87757
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Secure System Power Manager (SSPM) provides power control in secure
domain. The initialization flow is to load SSPM firmware to its SRAM
space and then enable it. It takes 19 ms to load sspm.bin.
coreboot logs:
CBFS: Found 'sspm.bin' @0x26740 size 0x645b in mcache @0xfffdd1ec
mtk_init_mcu: Loaded (and reset) sspm.bin in 19 msecs (59392 bytes)
BUG=b:379008996
BRANCH=none
TEST=build pass and see SSPM firmware loading log
Signed-off-by: Hailong Fan <hailong.fan@mediatek.corp-partner.google.com>
Change-Id: I9be0e7ee3d003b5ee9e07e4f136795755a11c5bc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/87761
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add MCUPM loader for mt8189.
It takes 36 ms to load mcupm.bin.
coreboot logs:
CBFS: Found 'mcupm.bin' @0x10d00 size 0x7fd6 in mcache @0xffffeb20
mtk_init_mcu: Loaded (and reset) mcupm.bin in 36 msecs (84124 bytes)
BUG=b:379008996
BRANCH=none
TEST=build pass and we can see the mcupm logs after reset releases.
Signed-off-by: Justin Yeh <justin.yeh@mediatek.corp-partner.google.com>
Change-Id: I4f3a4eb63d801df123e45f46fc715c39d858c377
Reviewed-on: https://review.coreboot.org/c/coreboot/+/87758
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Per discussion in CB:87660, this is another approach to fix duplicate
ACPI device GFX0.
The following GFX ACPI device is already declared in nissa/devicetree
by CB:83071, it declare a ACPI gfx device as below:
device ref igpu on
register "panel_cfg" = "{
.up_delay_ms = 200,
.down_delay_ms = 50,
.cycle_delay_ms = 500,
.backlight_on_delay_ms = 1,
.backlight_off_delay_ms = 200,
.backlight_pwm_hz = 200,
}"
register "gfx" = "GMA_DEFAULT_PANEL(0)"
end
It will generate an ACPI \_SB.PCI0.GFX0 device.
However, some Nissa projects re-select DRIVERS_GFX_GENERIC in their
overridetree, which results in the generation of a second
\_SB.PCI0.GFX0. This duplication causes iasl to fail when disassembling
the SSDT table.
Error message from iasl:
File appears to be binary: found 7485 non-ASCII characters, disassembling
Binary file appears to be a valid ACPI table, disassembling
Input file SSDT, Length 0x4A03 (18947) bytes
ACPI: SSDT 0x0000000000000000 004A03 (v02 COREv4 COREBOOT 00000000 CORE 20230628)
Pass 1 parse of [SSDT]
Firmware Error (ACPI): Failure creating named object [\_SB.PCI0.GFX0._DOD], AE_ALREADY_EXISTS (20200925/dswload-387)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-264)
Could not parse ACPI tables, AE_ALREADY_EXISTS
BUG=none
TEST=disassembling SSDT on pujjoniru successfully
Change-Id: I16e9875c12b4e8e42214da5972bed6a02c5567f4
Signed-off-by: Simon Yang <simon1.yang@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/87745
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
This commit introduces support for LP5 and DDR5 memory configurations
on ocelot. It adds board IDs for ocelot and integrates new memory
settings within the variant parameters. The new memory configuration
includes settings related to early command training and LP5/DDR5
specific training parameters.
LP5 memory configuration includes detailed DQ and DQS mapping for
different DDR channels. This facilitates accurate routing of signals
and initialization of memory. Additionally, SPD information retrieval
is adapted to accommodate DDR5-specific settings, such as DIMM module
topology and SMBus addresses.
BUG=b:394208231
TEST=Build Ocelot and verify it compiles without any error.
Change-Id: I828b1944d5a0d7f58aa8f545d567b1bb1b0da5ae
Signed-off-by: P, Usha <usha.p@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/87684
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The Fn key on pujjocento emits a scancode of 94 (0x5e).
BUG=b:417141058
TEST=Flash Pujjocento, boot to Linux kernel, and verify that KEY_FN is
generated when pressed using `evtest`.
Change-Id: If8ad29fccbd7c088ee793f3261df0b0999f25765
Signed-off-by: lizheng <lizheng@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/87752
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
RTL8111 was occasionally not detected after reboot. This change
moves the configuration of the ISOLATE_ODL pin to high earlier
in the sequence to ensure the device is properly visible during
PCIe bus enumeration.
BUG=b:407469351
TEST=Verified that the Ethernet NIC is enumerated after reboot.
before:
[DEBUG] PCI: 00:1c.0 scanning...
[SPEW ] do_pci_scan_bridge for PCI: 00:1c.0
[DEBUG] PCI: pci_scan_bus for bus 01
[INFO ] PCI: Static device PCI: 01:00.0 not found, disabling it.
[DEBUG] GENERIC: 0.0 enabled
[WARN ] PCI: Leftover static devices:
[WARN ] PCI: 01:00.0
[WARN ] PCI: Check your devicetree.cb.
[DEBUG] scan_bus: bus PCI: 00:1c.0 finished in 34 msecs
after:
[DEBUG] PCI: 00:1c.0 scanning...
[SPEW ] do_pci_scan_bridge for PCI: 00:1c.0
[DEBUG] PCI: pci_scan_bus for bus 01
[SPEW ] PCI: 01:00.0 [10ec/0000] ops
[DEBUG] PCI: 01:00.0 [10ec/8168] enabled
[DEBUG] GENERIC: 0.0 enabled
[INFO ] Enabling Common Clock Configuration
[INFO ] L1 Sub-State supported from root port 28
[INFO ] L1 Sub-State Support = 0xf
[INFO ] CommonModeRestoreTime = 0x96
[INFO ] Power On Value = 0xf, Power On Scale = 0x1
[INFO ] ASPM: Enabled L1
[INFO ] PCIe: Max_Payload_Size adjusted to 128
[INFO ] PCI: 01:00.0: Enabled LTR
[INFO ] PCI: 01:00.0: Programmed LTR max latencies
[DEBUG] scan_bus: bus PCI: 00:1c.0 finished in 68 msecs
Change-Id: Idc0eb453c342828e0e8886ca5cacea8d7efcc437
Signed-off-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/87734
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
The FW_CONFIG feature is not used on mc_rpl. Delete the related source
file and the reference to it in Makefile.
Change-Id: Ifec1efc239801205f1aec2095082c8f744f84a55
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/87672
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Since this board comes with a fixed SoC (Raptor Lake with ADL-P PCH),
there is no need to have multiple different gpio configuration files and
devicetree files. This patch deletes the unneeded files and adopts
Makefile.mk to not use them.
Change-Id: Iced9d695e3f21dec260795bb651109ff9b2beb59
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/87671
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
This mainboard neither uses Chrome OS nor has any embedded controller
available. This patch removes all references from the build in this
regard. This also requires some refactoring in board_id.c.
Change-Id: If834480fbdac4b4843c265a257d3a77678f56aab
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/87666
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Rename chromeos.fmd to mc_rpl.fmd and adjust the flash layout settings
to match the needs of this board. There is e.g. no A/B scheme used and
CSME stitching is done externally, therefore no detailed CSME partitions
are required at all.
Change-Id: I6389960d816c5f1a4690a965961301d3797305ff
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/87665
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
