In preparation for adding additional GM45/ICH9 based Dell Latitude
laptops, rework the E6400 port to use a variant scheme so that code can
be shared.
Change-Id: I8094fce56eaaadb20aef173644cd3b2c0b008e95
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84565
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
This adds changes to conditionally enable the config
`DRIVERS_INTEL_MIPI_SUPPORTS_PRE_PRODUCTION_SOC` when
`SOC_INTEL_PANTHERLAKE_PRE_PRODUCTION_SILICON` is enabled.
This ensures that MIPI firmware and drivers are compatible with
Panther Lake pre-production silicon.
BUG=b:424355826
TEST=Ensures `DRIVERS_INTEL_MIPI_SUPPORTS_PRE_PRODUCTION_SOC` is
enabled for google/fatcat4es and all variants with ES silicon.
Change-Id: I9687618cfceac32425fa19b4f1f30040b88a2d15
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88220
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Pranava Y N <pranavayn@google.com>
This updates the Kconfig for Google Fatcat mainboards to include
`SOC_INTEL_PANTHERLAKE_PRE_PRODUCTION_SILICON` option to ensure
compatibility with Panther Lake pre-production silicon. This selection
aligns these boards with the necessary pre-production silicon settings
BUG=b:424355826
TEST=Ensure mainboards like fatcat4es and fatcatnuvo4es have
`SOC_INTEL_PANTHERLAKE_PRE_PRODUCTION_SILICON` config enabled.
Change-Id: Icde96976e0e3ccfc543bc948d2923e0f84e7da68
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88219
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch introduces a new configuration option
`SOC_INTEL_PANTHERLAKE_PRE_PRODUCTION_SILICON` that allows users to
specify if their mainboard is using Panther Lake pre-production silicon
aka Engineering Silicon (ES) with pre-production signed ME Firmwares.
The default value is set to 'n', ensuring it is disabled unless
explicitly chosen.
BUG=b:424355826
TEST=No change in the functionality, just added new configs.
Change-Id: I8ad83b07f057a227b62e33b6c6c0f46c3952be6b
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88218
Reviewed-by: Pranava Y N <pranavayn@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Due to Pujjoquince does not have ISH, thus define bit 29 in
firmware_config to indicate ISH presence per platform.
BUG=b:417599885
BRANCH=none
TEST= Use the command ls /dev/cros_ and no cros_ish option
will appear
Change-Id: I286300eadf7991d3a30936f5904ff3eef4480039
Signed-off-by: erin liang <erin.liang@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88364
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add HYNIX H54G46CYRBX267 as id 0, and add HYNIX H54G56CYRBX247
as id 1, resulting in the list below:
DRAM Part Name ID to assign
K4U6E3S4AB-MGCL 0 (0000)
K4UBE3D4AB-MGCL 1 (0001)
MT53E1G32D2NP-046 WT:B 1 (0001)
NT6AP512T32BL-J1 2 (0010)
NT6AP1024F32BL-J1 3 (0011)
CXDB4CBAM-ML-A 2 (0010)
H54G56CYRBX247 1 (0001)
H54G46CYRBX267 0 (0000)
BUG=430792154
TEST=Use part_id_gen to generate related settings
Change-Id: I6ea840862b4b7b728a351425da9fc4052c201e3c
Signed-off-by: Hualin Wei <weihualin@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88419
Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
As far back as the x201, Lenovo's EC ACPI has treated 128 as an invalid
value, and returned a corrected value when it is reported/read from EC
RAM. Drop the ME workaround, which most H8-equipped boards select, in
favor of Lenovo's logic, since both accomplish the same result.
Change-Id: Icdc91e439ec30c8263de5810a13e75f7595472a5
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88416
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Looking at the ACPI dumps of many older Thinkpads, most do not have a
second thermal zone (zone 1), they only use zone 0. This doesn't seem
to be a problem for most boards in the tree currently, but newer boards
(such as the T480) are reporting critical temperature errors on zone 1,
due to differences in the EC RAM layout (ie, TMP1 is not valid).
To mitigate this issue with the T480 (and likely other newer boards),
only include the ACPI code for thermal zone 1 for boards which need it.
Explicitly select it for those boards based on ACPI dump analysis and
model similarity.
Change-Id: Ic022f2e14b2cae74656c0ac85ba8410d50cdc9de
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88415
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Using Kconfig options instead of chip registers allows for newer boards
which do not implement BT/WWAN detection to not compile in the GPIO-
related parts, which are only valid for older (pre-FSP) platforms.
Change-Id: Ibfe738adfc75abfaf078c6b7ff5472a1424909f5
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88414
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add a header with CFR objects for existing configuration options,
so that supported boards can make use of them without duplication.
TEST=build/boot lenovo/t480 w/edk2 payload
Change-Id: I8f5c335a8b9d1697b77b3c3542bd96f98583dbf6
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88394
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Add a header with CFR objects for existing configuration options,
so that supported boards can make use of them without duplication.
TEST=build/boot lenovo/t480 w/edk2 payload
Change-Id: I198f569e69abd42071df4d5354cd2bb258749257
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88393
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Create the caboc variant of the brox reference board by copying
the template files to a new directory named for the variant.
BUG=b:420796212
TEST=util/abuild/abuild -p none -t google/brox -x -a
make sure the build includes GOOGLE_CABOC.
Change-Id: I424933574873defe5289fbe7309270583cb8a49e
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88379
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit introduces Direct Memory Access (DMA) support for the Intel
Fast SPI block, enhancing data transfer capabilities from SPI flash
memory. The primary motivation for this addition is to improve
performance in multitasking environments by offloading read operations
to DMA, thus freeing up CPU resources for other tasks. The traditional
memory-mapped SPI flash read operations can be CPU-intensive and slow in
scenarios where large data volumes are transferred.
This feature is gated by a FAST_SPI_DMA configuration option. The DMA
operations are integrated with existing SPI flash read functionalities,
ensuring fallback to memory-mapped operations if DMA is unsupported or
fails. The DMA code implementation uses mutex-based synchronization to
ensure thread-safe DMA transactions.
The boot_device_ro() function has been modified to check for DMA support
and installs custom DMA operations when available.
We conducted measurements on a 200 KB data transfer and noticed a 1.8%
improvement with DMA compared to memcpy on memory-mapped SPINOR, with
DMA taking 10.8 ms and memcpy taking 11 ms.
Change-Id: I4b4ca9ff08e436ca627afa6b0d9bb00f3c450a5e
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88277
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch updates the memory layout for AP Firmware boot on the
Qualcomm x1p42100 SoC. This update is crucial to ensure that all
processors and co-processors can successfully load their
respective blobs during the process of booting to the OS.
TEST=Successfully booted google/blueu.
Change-Id: Ibce385e9d201f0a3c5daf19e8dfe235fa9f695af
Signed-off-by: Sasirekaa Madhesu <smadhesu@qualcomm.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88420
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
This commit extends the cooperative multitasking functionality to
support the x86_64 architecture. Previously, cooperative multitasking
was only available for x86_32, as indicated by the error directive in
thread.c.
A new thread_switch_64.S file has been added to implement 64-bit
register handling for thread switching, and thread_switch.S has been
renamed to thread_switch_32.S accordingly.
Change-Id: I14ed625160a62e42d800757d30397c6c85f943b4
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88216
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Enable USB3 WWAN since the issue is fixed with the latest schematics.
Schematic version: 500E_S3A0_TWL_MB_FVT_20250527
BUG=b:424945817
BRANCH=none
TEST=Remove Verify USB3 WWAN with the latest schematics.check the WWAN USB3 interface is now working properly..
Change-Id: I30eb74a8456bc63c964269822e0b10135d24aa1f
Signed-off-by: Luca Lai <luca.lai@lcfc.corp-partner.google.com>
Schematic version: 500E_S3A0_TWL_MB_FVT_20250527
BUG=b:424945817
BRANCH=none
TEST=Verify USB3 WWAN with the latest schematics.
Change-Id: I30eb74a8456bc63c964269822e0b10135d24aa1f
Signed-off-by: Luca Lai <luca.lai@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88340
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Because of intel suggestion, the change will fix the sensor driver
could be "probe fail" issue. So update mipi camera parameters' value.
Change:
1. CSI Camera lanes from 2 to 4.
2. Value of index 0 of frequency link array from 720000000 to 360000000
3. Value of index 1 of frequency link array from 360000000 to 180000000
BUG=b:395763555
BRANCH=none
TEST=Build and boot to OS and check mipi camera function.
Change-Id: Ieea6d99182df9c5aa9ca7a7f72f031921c24199e
Signed-off-by: Luca Lai <luca.lai@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88288
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Update fingerprint enable pin status to keep the module disabled
and in reset in firmware. This allows the module to be enabled
and released from reset during kernel boot via ACPI.
BUG=b:411558536
BRANCH=none
TEST= Boot to OS and into VT2, use ectool --name=cros_fp version
will return fingerprint version information and check the
functionality works.
Change-Id: I98707e0e6ba550f6b7d75a84e72843c3873fa56c
Signed-off-by: erin liang <erin.liang@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88287
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
This change adds the necessary configuration for the elan
touchscreen (ELAN9004) device, connected to I2C bus 16.
It includes settings for:
* HID descriptor
* Device description
* IRQ configuration
* Detection
* Reset, stop and enable GPIOs with their respective delays
* Power resource handling
* HID descriptor register offset
BUG=b:430467732
TEST=emerge-nissa coreboot and elan touchscreen can work well.
Change-Id: I08a32eae272d5ef93f1c89bcb96b9ba50c037624
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88370
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
The PS/2 Keyboard and Mouse won't work in Microsoft Windows 10 or 11 on
these tested HP variants:
- compaq_pro_6300
- compaq_8200_elite_sff
- compaq_8300_elite_sff
Unless the following line to acpi/superio.asl was added:
#include <drivers/pc80/pc/ps2_controller.asl>
Without this patch PS/2 ports only work in EDK2, SeaBIOS, GRUB 2 and
Linux.
Dmesg output for comparison without and with patch (trimmed):
[ 0.232601] pnp: PnP ACPI: found 16 devices
...
[ 0.231146] pnp: PnP ACPI: found 18 devices
...
TEST=Boot Windows 10 / 11 verify that PS/2 Keyboard & Mouse works!
Although only 3 models were tested and this common option affects all
snb_ivb_desktops variants I'm pretty confident it will work on all the
others since it also works on boards from other Manufacturers from Dell
and GIGABYTE even single port with splitter cable.
Change-Id: I21c10cc24c25887ab822a5889de5eec3b3537ac9
Signed-off-by: Walter Sonius <walterav1984@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88322
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
The boot time is improved by 50ms in bootblock.
BUG=b:379008996
BRANCH=none
TEST=check the boot time by `cbmem`.
(previous)
11:start of bootblock 247,551 (60)
12:end of bootblock 312,495 (64,944)
(now)
11:start of bootblock 255,424 (60)
12:end of bootblock 270,911 (15,487)
Signed-off-by: Vince Liu <vince-wl.liu@mediatek.corp-partner.google.com>
Change-Id: I0c3a5cff7eecb67e34d8ff1d3084f6a34d9cdbe0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88368
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
This HP desktop comes in 4 different CPU variants. This port was made
using the Pentium 3558U @ 1.70GHz variant with 2*4GB DDR3L SODIMM RAM
modules with a single SATA adapter cable. Other variants may come with
an M2.SSD slot which may need other devicetree.cb PCIe / SATA edits!
Model: HP 260 G1 DM Business PC
Regulatory Model: TPC-1011-DM
Product No.: N9F00EA#ABH, 260G1eD/G3558U/500h/4X/50f NL
Mainboard: E131920, 791401-002
Pure autoport (initial commit) doesn't boot, further patches bring up
general Haswell fixes, vendor/product naming corrected, RAM SPD MAP
slot detection, (m)PCIe fixes enabling onboard LAN and mini PCIe slot
and some NPCD379 code from other HP desktops make most superio related
functions work for this PC.
Flash instructions:
After setting the FDO jumper on the motherboard the whole ROM can be
dumped, however writing is locked for some part of the BIOS region.
An external flasher ch341a_spi (3.3v mod) was used with a SOIC 8 pomona
probe to flash the MX25L6406E in situ without any issues. Only the
power of the USB programmer was used, and the board's main PSU was
disconnected during flash!
Tested:
- coreboot 25.06-77-g812d0e2f626d as base
- EDK2 (MrChromebox/2502)
- SeaBIOS 1.16.3
- SystemAgent mrc.bin (haswell/peppy)
- libgfxinit textmode (SeaBIOS) / framebuffer (EDK2)
- DP / DP++ (HDMI) & VGA all available during POST, BOOT and OS
- Pentium 3558U
- RAM single 4GB and dual slot 8GB total with 1.35V DDR3L SODIMMS
4GB DDR3-1600 - SK Hynix HMT451S6BFR8A-PB (2016-W01)
HMT451S6BFR8A-PB NO AA 1601
1Rx8 PC3L-12800S-11-13-B4
4GB DDR3 1600 - Kingston 9905469-143.A00LF (2016-W05)
KTH-X3CL/4G
1.35V
BPMK0831621
9905469-143.A00LF
0000007258426-PW005291
- Fedora MATE 42 (Kernel 6.14)
- KDE NEON 6.4 (Kernel 6.11)
- Audio Outputs HDMI, Headphone, Lineout & Speaker (left&right chan.)
- USB2/3 all ports
- Realtek onboard Gb LAN
- miniPCIe slot + its embedded USB (Intel Wireless AC3160HMW+BT)
- SATA port using the original flatcable adapter
- PowerButton (Poweron/Poweroff/Wake)
- LEDs HDD & POWER (both off during suspend)
- Shutdown/Reboot/Suspend
- Strip down the Intel ME/TXE firmware (make menuconfig)
- Disabling ME HECI (manually disable in devicetree.cb)
- flashrom -p internal -c "MX25L6406E/MX25L6408E" (read & write)
Not tested:
- Broadwell mrc.bin
- Front Microphone Port
- USBDEBUG
- VBIOS
Not working:
- FAN control its either full OFF or full ON see instruction!
- Wake on LAN
- Ethernet is detected as PCIe slot connected instead of onboard
- Disable Intel ME PCI interface (make menuconfig)
- Windows 10/11 USB detection/hotplug issues (all USB ports)
- Haswell NRI (posts & boots but will shutdown in less than a minute)
FAN instructions:
If the superio HWM (devicetree.cb node pnp 2e.8) is set to on, the FAN
will turn OFF during post and stays OFF. If the superio HWM pnp 2e.8 is
set to off the FAN will stay ON and will rampup after post in roughly a
minute to its maximum RPM and will stay that way (current default)!
The data.vbt blob was extracted using debugfs from the OEM firmware
v2.19 which enables all video outputs Displayport / DP++ (HDMI) and VGA.
Theoretically like the "compaq_8200_elite_sff" it should be possible
to flash internally using a 2 step flash procedure using a minimized ME
a small SeaBIOS based coreboot and a temporary flash layout inside the
writeable BIOS region.
Change-Id: Ifedd9f700e5f3875d3577fa56225d9d49d622b47
Signed-off-by: Walter Sonius <walterav1984@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88326
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Update TPM related default value for TPM_TIS_ACPI_INTERRUPT based on
schematic_1433518 after mapping GPP_B to GPE0_DW1.
BUG=b:394208231, b:430001789
TEST=Build Ocelot and verify it compiles without any error.
Change-Id: I890c6779a24eaa7804594003466e8660af4becc2
Signed-off-by: P, Usha <usha.p@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88358
Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com>
Reviewed-by: Sowmya Aralguppe <sowmya.aralguppe@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
This patch updates the GPE configuration for Ocelot in baseboard
devicetree based on schematic_1433518.
BUG=b:394208231, b:430001789
TEST=Build Ocelot and verify it compiles without any error.
Change-Id: I60bcf586ab8653732925bfd9393baef226519c3a
Signed-off-by: P, Usha <usha.p@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88106
Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Sowmya Aralguppe <sowmya.aralguppe@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Previously, the touchscreen IRQ pin was not correctly configured to
GPP_F18_IRQ, which caused an unexpected interrupt storm and led to
the touchscreen becoming unresponsive. This change sets it to the
correct configuration. (schematics version 20250611_v31)
BUG=b:430200649
TEST= Ensure the touchscreen is working properly.
Ensure the interrupt count increases only when the screen is touched
via 'cat /proc/interrupts | grep ELAN'
Change-Id: I20cc9632df76acdfafd2968ece0dde8ee95cc791
Signed-off-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88360
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
When battery is not present, reduce power limits to below 45W,avoid
inability to enter the system.
To avoid poor efficiency of the adapter, leave a margin and set the
powerlimit to 38W.
This will check the current battery status and configure cpu power
limits using current PD power value.
BUG=b:418695656
BRANCH=None
TEST=
1、built (emerge-nissa coreboot chromeos-bootimage) and push ap firmware
to dut.
2、Connect 15W machine without battery to 45W adapter and check if it
starts up properly.
3、Use ec command “cbmem -c | grep PL“ to check if the PL4 value is 38
watts.
Log result:[INFO] CPU PL4 = 38 Watts
Change-Id: Iadd43c75ea9235b7ba0e3b97ef460280c13ef1e3
Signed-off-by: Baozhen Yang <yangbaozhen5@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88210
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Because of internal misunderstanding, modify mipi camera FW_CONFIG
Schematic version: 500E_S3A0_TWL_MB_FVT_20250527
BUG=b:395763555
BRANCH=none
TEST=Boot to OS and verify the mipi camera device are set based on
fw_config.
Change-Id: Id2d62d14bdfd6ad925c5a0c1a9799350a93e57e2
Signed-off-by: Luca Lai <luca.lai@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88352
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Align USB3 Type-A and the related GPIO settings with Pujjolo schematic
(Pujjolo_Pujjoquince_MB_EVT_20250523.pdf).
BUG=b:427962702
TEST= Connect USB 3.0 devices to the Type-A interface and use "lsusb -t"
command to verify the connection
Change-Id: I559dc8105258b91ca89b2f10644e4f95d6a4a085
Signed-off-by: Ben Kao <ben.kao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88290
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
This commit enhances the Kinmen variant of the Fatcat mainboard by
introducing an `fw_config` field for AUDIO. This field includes an
`AUDIO_UNKNOWN` option, providing a clear state when no specific audio
configuration is selected or known.
Furthermore, a probe statement for `AUDIO_ALC721_SNDW` has been added
to the `hda` device. This ensures that the system can correctly identify
and initialize the Realtek ALC721 audio codec when present.
These changes improve the flexibility and accuracy of audio
configuration and detection for the Kinmen board.
BUG=b:430205874
TEST=Able to boot google/kinmen to UI without valid Audio configuration.
Change-Id: I86634a4a49c4006584fc808719b2891186953a51
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88367
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: YH Lin <yueherngl@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit introduces an `AUDIO_UNKNOWN` option to the `fw_config` for
the Francka variant of the Fatcat mainboard. This allows for a default
or fallback state when a specific audio configuration isn't known or
desired.
Additionally, this change introduces audio probe statements that allow
the system to boot successfully even if `FW_CONFIG` is set to
`AUDIO_UNKNOWN`, effectively disabling the audio controller in such
cases.
This prevents boot failures when an unsupported or unknown audio codec
is selected, improving system robustness.
BUG=b:430205874
TEST=Able to boot google/francka to UI without valid Audio
configuration.
Change-Id: I34f7fe5f0509cbddfd3648afb087786373fcf8df
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88366
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: YH Lin <yueherngl@google.com>
This commit modifies the Fatcat mainboard configuration to ensure the
Audio controller is only enabled when a valid `FW_CONFIG` is selected.
This change introduces audio probe statements that allow the
system to boot successfully even if `FW_CONFIG` is set to
`AUDIO_UNKNOWN`, effectively disabling the audio controller in such
cases.
This prevents boot failures when an unsupported or unknown audio codec
is selected, improving system robustness.
BUG=b:430205874
TEST=Able to boot google/fatcat to UI without valid Audio configuration.
Change-Id: I7d1fa07978725129c2651f258894f3590e0a69eb
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88365
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: YH Lin <yueherngl@google.com>
The cache buffer is expected to be aligned to CONFIG_CBFS_CACHE_ALIGN by
the mem_pool_alloc function.
Change-Id: I153a4de5ae2b8549288946d0773009d586d5c65c
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88299
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch configures Interrupt, Enable and Reset pins for FPS.
BUG=b:394208231
TEST=Build Ocelot and verify it compiles without any error.
Change-Id: Ida4fab8da007403898e6843d5161249a5093fd54
Signed-off-by: Sowmya Aralguppe <sowmya.aralguppe@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88351
Reviewed-by: Pranava Y N <pranavayn@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch provides option to enable/disable ISH.Removed the
copies and redundant ISH pins from GPIO.c
Schematic version: schematic_1433518
Platform Mapping Document : Rev0p86
BUG=b:394208231
TEST= Build Ocelot and verify it compiles without any error.
Change-Id: I02bfa6b90b1c37a1d69d094804b4153e191a29af
Signed-off-by: Sowmya Aralguppe <sowmya.aralguppe@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88329
Reviewed-by: Avi Uday <aviuday@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch removes redundant SNDW GPIO mapping that was already present
in fw_config.c and applied as per FW_CONFIG.
BUG=b:427091370
TEST=Boot beep verification is possible using google/fatcat.
Change-Id: Ibeca991b9e855792df48073d2138b9c7ec130c41
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88350
Reviewed-by: Pranava Y N <pranavayn@google.com>
Reviewed-by: Jayvik Desai <jayvik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The Boot Profile for use with the IFWI Boot Flow. The selected profile
should be equal to or higher than the one configured in IFWI.
No Profile
Since its inception, coreboot has ignored the Boot Flow designed by
Intel; this only uses an IBB and OBB. Neither are measured or verified
and mapped without assistance.
Legacy
Profile 0 is for platforms that do not wish to enable Boot Guard boot
block verification or measurement enforcement.
Verified
Profile 1 is strict Verification enforcement. It prevents unverified
BIOS components from running.
Verified and Measured
Boot Guard Profile 2 is strict Verification and Measurement
enforcement; this prevents unverified BIOS components from running.
Upon manufacturing completion, this value is burned into an FPF
and is permanent. This setting is only configurable when OEM signing
is enabled.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I83d2fd134e1a893766f625fe2e2ddd81d48f9f8a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66103
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This documents that if the fw_cfg table was improperly configured by
QEMU, the fw_cfg_smbios_init() function would leak memory. We could
add a check to verify that this doesn't happen, but honestly that seems
like overkill. This just documents the issue in case this code is
copied for use elsewhere.
BUG=CIDs 1405799, 1405791, 1405792, 1405796, 1405797
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I4f253194dae52897633ab5d96bb8c2964b8365d0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88332
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Set the CRFP device to use GPIO for the power status. This causes an
ACPI `_STA()` function to be generated that returns the power status of
the CRFP device, rather than always returning `0x1`. This `_STA()`
function can be used during boot to skip enabling the device (and
performing the associated sleep) if the device is already powered on.
BUG=b:428793056
TEST=Boot the board and make sure the FPMCU was booted once
(e.g. examine FPMCU console logs)
TEST=Dump SSDT on kinmen
Scope (\_SB.PCI0.SPI0)
{
Device (CRFP)
{
...
...
PowerResource (PR00, 0x00, 0x0000)
{
Method (_STA, 0, Serialized) // _STA: Status
{
0x5D = \_SB.PCI0.GTXS /* External reference */
Local0
If (!Local0)
{
Return (Zero)
}
0x27 = \_SB.PCI0.GTXS /* External reference */
Local0
Local0 ^= One
If (Local0)
{
Return (Zero)
}
Return (One)
}
Method (_ON, 0, Serialized) // _ON_: Power On
{
Local0 = _STA ()
If ((Local0 == One))
{
Return (Zero)
}
\_SB.PCI0.CTXS (0x27)
\_SB.PCI0.STXS (0x5D)
Sleep (0x03)
\_SB.PCI0.STXS (0x27)
}
Method (_OFF, 0, Serialized) // _OFF: Power Off
{
\_SB.PCI0.CTXS (0x27)
\_SB.PCI0.CTXS (0x5D)
}
}
}
}
Change-Id: Ia3054c61dfab185d124b3aae8df9e80aa6afc71a
Signed-off-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88338
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change adds the necessary configuration for the focaltech
touchscreen (FTSC1000) device, connected to I2C bus 38.
It includes settings for:
* HID descriptor
* Device description
* IRQ configuration
* Detection
* Reset and enable GPIOs with their respective delays
* Power resource handling
* HID descriptor register offset
Datasheet: FT8112_Data_Sheet_V0.2_HKC20240415.pdf
BUG=b:429335394
TEST=emerge-nissa coreboot and focaltech touchscreen can work well.
Change-Id: Ic1c4bea599db23d5bc760bb7a54a2581cb293ce3
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88284
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
