Add wifi SAR table support for kinmen. Bit 2 in the CBI/FW_CONFIG
field is used to determine which SAR table file to load at runtime.
BUG=b:424628935
TEST= check coreboot log:
before:
[WARN ] CBFS: 'wifi_sar_defaults.hex' not found.
[ERROR] Failed to get the wifi_sar_defaults.hex file size!
[ERROR] failed getting SAR limits!
after:
[INFO ] Use wifi_sar_0.hex.
[INFO ] CBFS: Found 'wifi_sar_0.hex' @0x7072c0 size 0x116 in mcache @0x73abdd28
Change-Id: I63e44ba0a4094264165cc9bd7e41c4bd2094c242
Signed-off-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88458
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
This change adds the necessary configuration for the parade
touchscreen (PRT3406) device, connected to I2C bus 24.
It includes settings for:
* HID descriptor
* Device description
* IRQ configuration
* Detection
* Reset, stop and enable GPIOs with their respective delays
* Power resource handling
* HID descriptor register offset
BUG=b:431658711
TEST=emerge-nissa coreboot and parade touchscreen can work well
Change-Id: I5ca4853c4105d422b907c29fd0b3a4f2a1ce6d9f
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88483
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Fix resume failure on i2c-ILTK0001:00 where acpi_subsys_resume
returns -121. Increase reset_delay_ms from 10ms to 100ms to
ensure the device is ready after reset.
BUG=b:411164455
TEST=Build and boot and verified resume time across 5 cycles.
All within 500 ms limit.
Suspend-resume time w/ and w/o:
w/o: Average=433.6 ms
1. Resume time 430 ms within limit of 500 ms
2. Resume time 435 ms within limit of 500 ms
3. Resume time 440 ms within limit of 500 ms
4. Resume time 430 ms within limit of 500 ms
5. Resume time 433 ms within limit of 500 ms
w/: Average=449.4 ms
1. Resume time 440 ms within limit of 500 ms
2. Resume time 439 ms within limit of 500 ms
3. Resume time 451 ms within limit of 500 ms
4. Resume time 482 ms within limit of 500 ms
5. Resume time 435 ms within limit of 500 ms
Change-Id: I67ea9aa5ca8ba6f30f772c2decd464d889865347
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88527
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Because when stylus bringing into the garage will resume
from suspend using powerd_dbus_suspend command, so
update the stylus setting which wake_gpe from DW0 to DW2
to fix the funtion.
BUG=b:430712526
BRANCH=none
TEST= Build and boot to OS and check when stylus bringing into
garage and the system will not resume from suspend.
Change-Id: I526b608b03631f365bb33fc44904c87b00a47436
Signed-off-by: Luca Lai <luca.lai@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88479
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
This patch supports wake on touch for touchpad when LPSS I2C interface
is used by overriding GPE DW0 with group GPP_F.
Schematic version: schematic_1433518
Platform Mapping Document : Rev0p86
BUG=b:394208231
TEST= Build Ocelot and verify it compiles without any error.
Change-Id: Id2cc248aacebc0e85d06ad5c63c0605dd72cd05c
Signed-off-by: Sowmya Aralguppe <sowmya.aralguppe@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88534
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Pranava Y N <pranavayn@google.com>
Reviewed-by: Avi Uday <aviuday@google.com>
Fix Type C USB and display function
BUG=b:429267772
TEST=Build and flash to DUT, verify Type C USB and display function works
Change-Id: I37af5f4608b2756f0918a6b544b53818d1e45d63
Signed-off-by: Eren Peng <peng.eren@inventec.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88374
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Recent development of the "pro_6300" variant fixed VGA output in EDK2
(MrChromebox/2502) and SeaBIOS 1.16.3 using libgfxinit by removing the
following line from Kconfig "select GFX_GMA_ANALOG_I2C_HDMI_B" hinted by
Keith Hui. This fix also applies to the "compaq_8300_elite_sff" variant.
The VGA output without this change only works after loading the OS!
Change-Id: Ifaf3df12fdde996d2842650be411a6d844f949a4
Signed-off-by: Walter Sonius <walterav1984@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88305
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Set `DRIVER_TPM_I2C_BUS` to 0x01 for all ocelot variants selecting
`BOARD_GOOGLE_MODEL_OCELOT` instead of `BOARD_GOOGLE_OCELOT`. This
ensures that the right I2C Bus is selected for all the variants.
BUG=b:433177132
TEST=Ensure that TPM I2C probing is successful.
```
[INFO ] Probing TPM I2C: I2C bus 1 version 0x3230322a
[INFO ] DW I2C bus 1 at 0xfe022000 (400 KHz)
[INFO ] done! DID_VID 0x504a6666
[INFO ] TPM ready after 0 ms
```
Change-Id: Ib728eb410fcf2000e5d421d186a321a79b3894b0
Signed-off-by: Pranava Y N <pranavayn@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88513
Reviewed-by: Avi Uday <aviuday@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
This patch removes comments that are not applicable when aligned to
fw_config.c
Platform Mapping Document : Rev0p86
BUG=b:394208231
TEST=Build Ocelot and verify it compiles without any error.
Change-Id: Id258b4e89c522ec438a74a9a149388bcfde125d1
Signed-off-by: Sowmya Aralguppe <sowmya.aralguppe@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88462
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Pranava Y N <pranavayn@google.com>
Remove Bluetooth Audio offload to align to fw_config.c
Platform Mapping Document : Rev0p86
BUG=b:394208231
TEST=Build Ocelot and verify it compiles without any error.
Change-Id: I30edbc0a5622e8893469384b853cad323c6ac544
Signed-off-by: Sowmya Aralguppe <sowmya.aralguppe@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88460
Reviewed-by: Pranava Y N <pranavayn@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Modify variant configuration to support THC-based touchscreen and
touchpad configurations.
Platform Mapping Document : Rev0p86
BUG=b:394208231
TEST=Build Ocelot and verify it compiles without any error.
Change-Id: I7af8195f76312aa362a6be504b3fec7a81acec06
Signed-off-by: Sowmya Aralguppe <sowmya.aralguppe@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88418
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Pranava Y N <pranavayn@google.com>
Change level from low to high to fix goodix touchscreen issue.
BUG=b:430156965
BRANCH=none
TEST= Build and boot to OS to test touch function work fine.
Change-Id: I9bd16b2a9ebb5699ad4bf04b018aefc6b86b4199
Signed-off-by: Luca Lai <luca.lai@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88432
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
The DPTF parameters were defined by the thermal team.
Based on thermal table in 432114256 comment#1
BUG=b:432114256
TEST=emerge-nissa coreboot chromeos-bootimage
Signed-off-by: lizheng <lizheng@huaqin.corp-partner.google.com>
Change-Id: I969f93f384bb2a59f1300478794f48e30997736d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88463
Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Support variant specific power limits
BUG=b:399236160
TEST=emerge-nissa coreboot and check correct value on dirks.
Change-Id: If09a8f4d157c6fd01aabae1e455e289d3908b39b
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88245
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch unifies all the fatcat variants based on
`BOARD_GOOGLE_MODEL_FATCAT` to use the same mainboard part number
`Fatcat`.
BUG=b:430205874
TEST=Able to build/boot fatcat
Change-Id: I13a45e4763abaa9dfe26c53b4e5051d50640291d
Signed-off-by: Pranava Y N <pranavayn@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88353
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
These machine have BootGuard fused and requires deguard to
boot coreboot.
Known issues:
- Alpine Ridge Thunderbolt 3 controller does not work
- Some Fn+F{1-12} keys aren't handled correctly
- Nvidia dGPU is finicky
- Needs option ROM
- Power enable code is buggy
- Nouveau only works on linux 6.8-6.9
- Headphone jack isn't detected as plugged in despite correct verbs
Thanks to Leah Rowe for helping with the T480s.
Change-Id: I19d421412c771c1f242f6ff39453f824fa866163
Signed-off-by: Mate Kukri <km@mkukri.xyz>
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83274
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-by: Filip Lewiński <filip.lewinski@3mdeb.com>
Instead of providing an EC_SIG binary blob, generate it at build time
using the mec152x tool. Allows to move the EC_BODY in the fmap without
the need to generate a new EC_SIG.
TEST=Booted on amd/birman_plus without EC_SIG blob.
Change-Id: I2d7a791820d905b088194b290853509f10689fc6
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/87429
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This updates FSP UPDs for PCH PM SLP minimum assertion width and reset
power cycle duration to reduce the delays during a global reset and S5
suspend and resume flow.
Reference:
Panther Lake External Design Specification (EDS) Volume 2 (#813032)
BUG=None
TEST=Build a fatcat coreboot and issue a global reset to check the reset
delay is reduced to 1 second. Issue a lid close to suspend to S5 and
wake up by lid open to check the delay is reduced to 1 second.
Change-Id: If94917879125b1a523de131936047b497cce8ba7
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88444
Reviewed-by: Pranava Y N <pranavayn@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
In preparation for adding additional GM45/ICH9 based Dell Latitude
laptops, rework the E6400 port to use a variant scheme so that code can
be shared.
Change-Id: I8094fce56eaaadb20aef173644cd3b2c0b008e95
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84565
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
This adds changes to conditionally enable the config
`DRIVERS_INTEL_MIPI_SUPPORTS_PRE_PRODUCTION_SOC` when
`SOC_INTEL_PANTHERLAKE_PRE_PRODUCTION_SILICON` is enabled.
This ensures that MIPI firmware and drivers are compatible with
Panther Lake pre-production silicon.
BUG=b:424355826
TEST=Ensures `DRIVERS_INTEL_MIPI_SUPPORTS_PRE_PRODUCTION_SOC` is
enabled for google/fatcat4es and all variants with ES silicon.
Change-Id: I9687618cfceac32425fa19b4f1f30040b88a2d15
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88220
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Pranava Y N <pranavayn@google.com>
This updates the Kconfig for Google Fatcat mainboards to include
`SOC_INTEL_PANTHERLAKE_PRE_PRODUCTION_SILICON` option to ensure
compatibility with Panther Lake pre-production silicon. This selection
aligns these boards with the necessary pre-production silicon settings
BUG=b:424355826
TEST=Ensure mainboards like fatcat4es and fatcatnuvo4es have
`SOC_INTEL_PANTHERLAKE_PRE_PRODUCTION_SILICON` config enabled.
Change-Id: Icde96976e0e3ccfc543bc948d2923e0f84e7da68
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88219
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Due to Pujjoquince does not have ISH, thus define bit 29 in
firmware_config to indicate ISH presence per platform.
BUG=b:417599885
BRANCH=none
TEST= Use the command ls /dev/cros_ and no cros_ish option
will appear
Change-Id: I286300eadf7991d3a30936f5904ff3eef4480039
Signed-off-by: erin liang <erin.liang@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88364
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add HYNIX H54G46CYRBX267 as id 0, and add HYNIX H54G56CYRBX247
as id 1, resulting in the list below:
DRAM Part Name ID to assign
K4U6E3S4AB-MGCL 0 (0000)
K4UBE3D4AB-MGCL 1 (0001)
MT53E1G32D2NP-046 WT:B 1 (0001)
NT6AP512T32BL-J1 2 (0010)
NT6AP1024F32BL-J1 3 (0011)
CXDB4CBAM-ML-A 2 (0010)
H54G56CYRBX247 1 (0001)
H54G46CYRBX267 0 (0000)
BUG=430792154
TEST=Use part_id_gen to generate related settings
Change-Id: I6ea840862b4b7b728a351425da9fc4052c201e3c
Signed-off-by: Hualin Wei <weihualin@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88419
Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
As far back as the x201, Lenovo's EC ACPI has treated 128 as an invalid
value, and returned a corrected value when it is reported/read from EC
RAM. Drop the ME workaround, which most H8-equipped boards select, in
favor of Lenovo's logic, since both accomplish the same result.
Change-Id: Icdc91e439ec30c8263de5810a13e75f7595472a5
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88416
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Looking at the ACPI dumps of many older Thinkpads, most do not have a
second thermal zone (zone 1), they only use zone 0. This doesn't seem
to be a problem for most boards in the tree currently, but newer boards
(such as the T480) are reporting critical temperature errors on zone 1,
due to differences in the EC RAM layout (ie, TMP1 is not valid).
To mitigate this issue with the T480 (and likely other newer boards),
only include the ACPI code for thermal zone 1 for boards which need it.
Explicitly select it for those boards based on ACPI dump analysis and
model similarity.
Change-Id: Ic022f2e14b2cae74656c0ac85ba8410d50cdc9de
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88415
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Using Kconfig options instead of chip registers allows for newer boards
which do not implement BT/WWAN detection to not compile in the GPIO-
related parts, which are only valid for older (pre-FSP) platforms.
Change-Id: Ibfe738adfc75abfaf078c6b7ff5472a1424909f5
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88414
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Create the caboc variant of the brox reference board by copying
the template files to a new directory named for the variant.
BUG=b:420796212
TEST=util/abuild/abuild -p none -t google/brox -x -a
make sure the build includes GOOGLE_CABOC.
Change-Id: I424933574873defe5289fbe7309270583cb8a49e
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88379
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Enable USB3 WWAN since the issue is fixed with the latest schematics.
Schematic version: 500E_S3A0_TWL_MB_FVT_20250527
BUG=b:424945817
BRANCH=none
TEST=Remove Verify USB3 WWAN with the latest schematics.check the WWAN USB3 interface is now working properly..
Change-Id: I30eb74a8456bc63c964269822e0b10135d24aa1f
Signed-off-by: Luca Lai <luca.lai@lcfc.corp-partner.google.com>
Schematic version: 500E_S3A0_TWL_MB_FVT_20250527
BUG=b:424945817
BRANCH=none
TEST=Verify USB3 WWAN with the latest schematics.
Change-Id: I30eb74a8456bc63c964269822e0b10135d24aa1f
Signed-off-by: Luca Lai <luca.lai@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88340
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Because of intel suggestion, the change will fix the sensor driver
could be "probe fail" issue. So update mipi camera parameters' value.
Change:
1. CSI Camera lanes from 2 to 4.
2. Value of index 0 of frequency link array from 720000000 to 360000000
3. Value of index 1 of frequency link array from 360000000 to 180000000
BUG=b:395763555
BRANCH=none
TEST=Build and boot to OS and check mipi camera function.
Change-Id: Ieea6d99182df9c5aa9ca7a7f72f031921c24199e
Signed-off-by: Luca Lai <luca.lai@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88288
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Update fingerprint enable pin status to keep the module disabled
and in reset in firmware. This allows the module to be enabled
and released from reset during kernel boot via ACPI.
BUG=b:411558536
BRANCH=none
TEST= Boot to OS and into VT2, use ectool --name=cros_fp version
will return fingerprint version information and check the
functionality works.
Change-Id: I98707e0e6ba550f6b7d75a84e72843c3873fa56c
Signed-off-by: erin liang <erin.liang@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88287
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
This change adds the necessary configuration for the elan
touchscreen (ELAN9004) device, connected to I2C bus 16.
It includes settings for:
* HID descriptor
* Device description
* IRQ configuration
* Detection
* Reset, stop and enable GPIOs with their respective delays
* Power resource handling
* HID descriptor register offset
BUG=b:430467732
TEST=emerge-nissa coreboot and elan touchscreen can work well.
Change-Id: I08a32eae272d5ef93f1c89bcb96b9ba50c037624
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88370
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
The PS/2 Keyboard and Mouse won't work in Microsoft Windows 10 or 11 on
these tested HP variants:
- compaq_pro_6300
- compaq_8200_elite_sff
- compaq_8300_elite_sff
Unless the following line to acpi/superio.asl was added:
#include <drivers/pc80/pc/ps2_controller.asl>
Without this patch PS/2 ports only work in EDK2, SeaBIOS, GRUB 2 and
Linux.
Dmesg output for comparison without and with patch (trimmed):
[ 0.232601] pnp: PnP ACPI: found 16 devices
...
[ 0.231146] pnp: PnP ACPI: found 18 devices
...
TEST=Boot Windows 10 / 11 verify that PS/2 Keyboard & Mouse works!
Although only 3 models were tested and this common option affects all
snb_ivb_desktops variants I'm pretty confident it will work on all the
others since it also works on boards from other Manufacturers from Dell
and GIGABYTE even single port with splitter cable.
Change-Id: I21c10cc24c25887ab822a5889de5eec3b3537ac9
Signed-off-by: Walter Sonius <walterav1984@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88322
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
This HP desktop comes in 4 different CPU variants. This port was made
using the Pentium 3558U @ 1.70GHz variant with 2*4GB DDR3L SODIMM RAM
modules with a single SATA adapter cable. Other variants may come with
an M2.SSD slot which may need other devicetree.cb PCIe / SATA edits!
Model: HP 260 G1 DM Business PC
Regulatory Model: TPC-1011-DM
Product No.: N9F00EA#ABH, 260G1eD/G3558U/500h/4X/50f NL
Mainboard: E131920, 791401-002
Pure autoport (initial commit) doesn't boot, further patches bring up
general Haswell fixes, vendor/product naming corrected, RAM SPD MAP
slot detection, (m)PCIe fixes enabling onboard LAN and mini PCIe slot
and some NPCD379 code from other HP desktops make most superio related
functions work for this PC.
Flash instructions:
After setting the FDO jumper on the motherboard the whole ROM can be
dumped, however writing is locked for some part of the BIOS region.
An external flasher ch341a_spi (3.3v mod) was used with a SOIC 8 pomona
probe to flash the MX25L6406E in situ without any issues. Only the
power of the USB programmer was used, and the board's main PSU was
disconnected during flash!
Tested:
- coreboot 25.06-77-g812d0e2f626d as base
- EDK2 (MrChromebox/2502)
- SeaBIOS 1.16.3
- SystemAgent mrc.bin (haswell/peppy)
- libgfxinit textmode (SeaBIOS) / framebuffer (EDK2)
- DP / DP++ (HDMI) & VGA all available during POST, BOOT and OS
- Pentium 3558U
- RAM single 4GB and dual slot 8GB total with 1.35V DDR3L SODIMMS
4GB DDR3-1600 - SK Hynix HMT451S6BFR8A-PB (2016-W01)
HMT451S6BFR8A-PB NO AA 1601
1Rx8 PC3L-12800S-11-13-B4
4GB DDR3 1600 - Kingston 9905469-143.A00LF (2016-W05)
KTH-X3CL/4G
1.35V
BPMK0831621
9905469-143.A00LF
0000007258426-PW005291
- Fedora MATE 42 (Kernel 6.14)
- KDE NEON 6.4 (Kernel 6.11)
- Audio Outputs HDMI, Headphone, Lineout & Speaker (left&right chan.)
- USB2/3 all ports
- Realtek onboard Gb LAN
- miniPCIe slot + its embedded USB (Intel Wireless AC3160HMW+BT)
- SATA port using the original flatcable adapter
- PowerButton (Poweron/Poweroff/Wake)
- LEDs HDD & POWER (both off during suspend)
- Shutdown/Reboot/Suspend
- Strip down the Intel ME/TXE firmware (make menuconfig)
- Disabling ME HECI (manually disable in devicetree.cb)
- flashrom -p internal -c "MX25L6406E/MX25L6408E" (read & write)
Not tested:
- Broadwell mrc.bin
- Front Microphone Port
- USBDEBUG
- VBIOS
Not working:
- FAN control its either full OFF or full ON see instruction!
- Wake on LAN
- Ethernet is detected as PCIe slot connected instead of onboard
- Disable Intel ME PCI interface (make menuconfig)
- Windows 10/11 USB detection/hotplug issues (all USB ports)
- Haswell NRI (posts & boots but will shutdown in less than a minute)
FAN instructions:
If the superio HWM (devicetree.cb node pnp 2e.8) is set to on, the FAN
will turn OFF during post and stays OFF. If the superio HWM pnp 2e.8 is
set to off the FAN will stay ON and will rampup after post in roughly a
minute to its maximum RPM and will stay that way (current default)!
The data.vbt blob was extracted using debugfs from the OEM firmware
v2.19 which enables all video outputs Displayport / DP++ (HDMI) and VGA.
Theoretically like the "compaq_8200_elite_sff" it should be possible
to flash internally using a 2 step flash procedure using a minimized ME
a small SeaBIOS based coreboot and a temporary flash layout inside the
writeable BIOS region.
Change-Id: Ifedd9f700e5f3875d3577fa56225d9d49d622b47
Signed-off-by: Walter Sonius <walterav1984@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88326
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Update TPM related default value for TPM_TIS_ACPI_INTERRUPT based on
schematic_1433518 after mapping GPP_B to GPE0_DW1.
BUG=b:394208231, b:430001789
TEST=Build Ocelot and verify it compiles without any error.
Change-Id: I890c6779a24eaa7804594003466e8660af4becc2
Signed-off-by: P, Usha <usha.p@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88358
Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com>
Reviewed-by: Sowmya Aralguppe <sowmya.aralguppe@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
This patch updates the GPE configuration for Ocelot in baseboard
devicetree based on schematic_1433518.
BUG=b:394208231, b:430001789
TEST=Build Ocelot and verify it compiles without any error.
Change-Id: I60bcf586ab8653732925bfd9393baef226519c3a
Signed-off-by: P, Usha <usha.p@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88106
Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Sowmya Aralguppe <sowmya.aralguppe@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Previously, the touchscreen IRQ pin was not correctly configured to
GPP_F18_IRQ, which caused an unexpected interrupt storm and led to
the touchscreen becoming unresponsive. This change sets it to the
correct configuration. (schematics version 20250611_v31)
BUG=b:430200649
TEST= Ensure the touchscreen is working properly.
Ensure the interrupt count increases only when the screen is touched
via 'cat /proc/interrupts | grep ELAN'
Change-Id: I20cc9632df76acdfafd2968ece0dde8ee95cc791
Signed-off-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88360
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
When battery is not present, reduce power limits to below 45W,avoid
inability to enter the system.
To avoid poor efficiency of the adapter, leave a margin and set the
powerlimit to 38W.
This will check the current battery status and configure cpu power
limits using current PD power value.
BUG=b:418695656
BRANCH=None
TEST=
1、built (emerge-nissa coreboot chromeos-bootimage) and push ap firmware
to dut.
2、Connect 15W machine without battery to 45W adapter and check if it
starts up properly.
3、Use ec command “cbmem -c | grep PL“ to check if the PL4 value is 38
watts.
Log result:[INFO] CPU PL4 = 38 Watts
Change-Id: Iadd43c75ea9235b7ba0e3b97ef460280c13ef1e3
Signed-off-by: Baozhen Yang <yangbaozhen5@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88210
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Because of internal misunderstanding, modify mipi camera FW_CONFIG
Schematic version: 500E_S3A0_TWL_MB_FVT_20250527
BUG=b:395763555
BRANCH=none
TEST=Boot to OS and verify the mipi camera device are set based on
fw_config.
Change-Id: Id2d62d14bdfd6ad925c5a0c1a9799350a93e57e2
Signed-off-by: Luca Lai <luca.lai@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88352
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Align USB3 Type-A and the related GPIO settings with Pujjolo schematic
(Pujjolo_Pujjoquince_MB_EVT_20250523.pdf).
BUG=b:427962702
TEST= Connect USB 3.0 devices to the Type-A interface and use "lsusb -t"
command to verify the connection
Change-Id: I559dc8105258b91ca89b2f10644e4f95d6a4a085
Signed-off-by: Ben Kao <ben.kao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88290
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
This commit enhances the Kinmen variant of the Fatcat mainboard by
introducing an `fw_config` field for AUDIO. This field includes an
`AUDIO_UNKNOWN` option, providing a clear state when no specific audio
configuration is selected or known.
Furthermore, a probe statement for `AUDIO_ALC721_SNDW` has been added
to the `hda` device. This ensures that the system can correctly identify
and initialize the Realtek ALC721 audio codec when present.
These changes improve the flexibility and accuracy of audio
configuration and detection for the Kinmen board.
BUG=b:430205874
TEST=Able to boot google/kinmen to UI without valid Audio configuration.
Change-Id: I86634a4a49c4006584fc808719b2891186953a51
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88367
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: YH Lin <yueherngl@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit introduces an `AUDIO_UNKNOWN` option to the `fw_config` for
the Francka variant of the Fatcat mainboard. This allows for a default
or fallback state when a specific audio configuration isn't known or
desired.
Additionally, this change introduces audio probe statements that allow
the system to boot successfully even if `FW_CONFIG` is set to
`AUDIO_UNKNOWN`, effectively disabling the audio controller in such
cases.
This prevents boot failures when an unsupported or unknown audio codec
is selected, improving system robustness.
BUG=b:430205874
TEST=Able to boot google/francka to UI without valid Audio
configuration.
Change-Id: I34f7fe5f0509cbddfd3648afb087786373fcf8df
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88366
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: YH Lin <yueherngl@google.com>
This commit modifies the Fatcat mainboard configuration to ensure the
Audio controller is only enabled when a valid `FW_CONFIG` is selected.
This change introduces audio probe statements that allow the
system to boot successfully even if `FW_CONFIG` is set to
`AUDIO_UNKNOWN`, effectively disabling the audio controller in such
cases.
This prevents boot failures when an unsupported or unknown audio codec
is selected, improving system robustness.
BUG=b:430205874
TEST=Able to boot google/fatcat to UI without valid Audio configuration.
Change-Id: I7d1fa07978725129c2651f258894f3590e0a69eb
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88365
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: YH Lin <yueherngl@google.com>
