Mainboard is Krug 14". I do not physically have this system; someone
with physical access to one sent me the output of autoport which I then
modified to produce this port. I was also sent the VBT binary, which was
obtained from `/sys/kernel/debug/dri/0/i915_vbt` while running version
A02 of the vendor firmware.
This was originally tested and found to be working as a standalone board
port in Libreboot, but this variant based port in upstream coreboot has
not been tested.
This can be internally flashed by sending a command to the EC, which
causes the EC to pull the FDO pin low and the firmware to skip setting
up any chipset based write protections [1]. The EC is the SMSC MEC5055,
which seems to be compatible with the existing MEC5035 code.
[1] https://gitlab.com/nic3-14159/dell-flash-unlock
Change-Id: I0283653156083768e1fd451bcf539b4e028589f4
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82129
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Mainboard is PAL60/LA-6562P (UMA). The version with an Nvidia dGPU was
not tested. I do not physically have this system; someone with physical
access to one sent me the output of autoport which I then modified to
produce this port. I was also sent the VBT binary, which was obtained
from `/sys/kernel/debug/dri/0/i915_vbt` while running version A08 of the
vendor firmware.
This was originally tested and found to be working as a standalone board
port in Libreboot, but this variant based port in upstream coreboot has
not been tested.
This can be internally flashed by sending a command to the EC, which
causes the EC to pull the FDO pin low and the firmware to skip setting
up any chipset based write protections [1]. The EC is the SMSC MEC5055,
which seems to be compatible with the existing MEC5035 code.
[1] https://gitlab.com/nic3-14159/dell-flash-unlock
Change-Id: Ibdd40cc15642b8d404159d5962670ccc4167a9ec
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82127
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Based on autoport. data.vbt extracted from a running system
using "intelvbttool --inlegacy"
Like with 8200 SFF, OEM firmware write-protects itself, but not
the IFD, GBE or ME regions when FDO jumper is applied. Therefore,
ME can be shrunken with me_cleaner and BIOS region moved there.
Tested:
- Internal flashing from the latest endor BIOS (v2.33)
- Sandy Bridge Pentium G630 CPU
- RAM: 8+0, 8+4, 8+8 1866MHz DDR3
- SeaBIOS 1.16.2, metest86+ v6, coreinfo, nvramcui & tint payloads
- libgfxinit txtmode & corebootfb
- VGA, DisplayPort (DVI monitor through an adapter)
- Gigabit Ethernet
- All front and back USB ports
- Booting Void Linux
- Rebooting
- Mini-PCIe WLAN (PCIe)
- Both SATA ports: 2.5" & DVD
- PS/2 keyboard and mouse
- Fan control
- TPM settings in SeaBIOS
Untested:
- Second Mini-PCIe slot (or is it mSATA): connector not present on my unit
- MXM graphics
Not working:
S3: it sleeps for a few seconds and wakes up on its own
Change-Id: I1cba7a5e664758eba7ea2ab8a55658b307d1d173
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79583
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Mainboard is Krug 15". I do not physically have this system; someone
with physical access to one sent me the output of autoport which I then
modified to produce this port. I was also sent the VBT binary, which was
obtained from `/sys/kernel/debug/dri/0/i915_vbt` while running version
A14 of the vendor firmware.
This was originally tested and found to be working as a standalone
board port in Libreboot, but this variant based port in upstream
coreboot has not been tested.
This can be internally flashed by sending a command to the EC, which
causes the EC to pull the FDO pin low and the firmware to skip setting
up any chipset based write protections [1]. The EC is the SMSC MEC5055,
which seems to be compatible with the existing MEC5035 code.
[1] https://gitlab.com/nic3-14159/dell-flash-unlock
Change-Id: Ic9bfc028d4b8ae01ccc019157bb53e7764671134
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82128
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Mainboard is PAL50/LA-6591P (UMA). The version with an Nvidia dGPU was
not tested. I do not physically have this system; someone with physical
access to one sent me the output of autoport which I then modified to
produce this port. I was also sent the VBT binary, which was obtained
from `/sys/kernel/debug/dri/0/i915_vbt` while running version A25 of the
vendor firmware.
This was originally tested and found to be working as a standalone board
port in Libreboot, but this variant based port in upstream coreboot has
not been tested.
This can be internally flashed by sending a command to the EC, which
causes the EC to pull the FDO pin low and the firmware to skip setting
up any chipset based write protections [1]. The EC is the SMSC MEC5055,
which seems to be compatible with the existing MEC5035 code.
[1] https://gitlab.com/nic3-14159/dell-flash-unlock
Change-Id: Ic48d9ea58172a5b13958c8afebcb19c8929c4394
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82126
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Mainboard is QXW10/LA-7902P (UMA). I do not physically have this board;
someone with physical access to one sent me the output of autoport which
I then modified to produce this port. I was also sent the VBT binary,
which was obtained from `/sys/kernel/debug/dri/0/i915_vbt` while running
version A21 of the vendor firmware.
This was originally tested and found to be working as a standalone board
port in Libreboot, but this variant based port in upstream coreboot has
not been tested.
This can be internally flashed by sending a command to the EC, which
causes the EC to pull the FDO pin low and the firmware to skip setting
up any chipset based write protections [1]. The EC is the SMSC MEC5055,
which seems to be compatible with the existing MEC5035 code.
Change-Id: Idaf6618df70aa19d8e60b2263088737712dec5f0
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82125
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Mainboard is QALA0/LA-7761P (UMA). The version with a Nvidia dGPU was
not tested. I do not physically have this system; someone with physical
access to one sent me the output of autoport which I then modified to
produce this port.
I was also sent the vbios obtained using intel_bios_dumper while running
version A22 of the vendor firmware, which I then processed using
`intelvbttool --inoprom vbios.bin --outvbt data.vbt` to obtain data.vbt.
This was originally tested and found to be working as a standalone board
port in Libreboot, though this variant based port in upstream coreboot
has not been tested.
This can be internally flashed by sending a command to the EC, which
causes the EC to pull the FDO pin low and the firmware to skip setting
up any chipset based write protections [1]. The EC is the SMSC MEC5055,
which seems to be compatible with the existing MEC5035 code.
[1] https://gitlab.com/nic3-14159/dell-flash-unlock
Change-Id: I9fcd73416018574f8934962f92c8222d0101cb71
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79012
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Instead of using defines for command IDs and argument values, use enums
to provide more type safety. This also has the effect of moving the
command IDs to a more central location instead of defines spread out
throughout the header.
Change-Id: I788531e8b70e79541213853f177326d217235ef2
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82998
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Introduce a sandybridge-style devicetree setting for SPD addresses,
and use it instead of runtime code in mb_get_spd_map() for all
haswell boards without CONFIG(HAVE_SPD_IN_CBFS) - effectively all
boards except google/slippy.
Patch also covers recently added Z97 boards using Broadwell MRC.
Also update util/autoport to match.
abuild passes for all affected boards.
autoport builds, but otherwise untested.
Change-Id: I574aec9cb6a47c8aaf275ae06c7e1fb695534b34
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79025
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This reverts commit aa6865291a.
Reason for revert: We applied this patch for touchpad stuttering issue
for XOl, but the same touchpad problem was reported. So we would revert
this change and apply kernel patch (crrev/c/5808335) to avoid the
touchpad issue.
Change-Id: I78139932e76dbd4128fb325dd70b7dcff3bcc81c
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84058
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
- Turn off L2C SRAM and reconfigure as L2 cache:
Mediatek SoC uses part of the L2 cache as SRAM before DRAM is ready.
After DRAM is ready, we should invoke disable_l2c_sram to reconfigure
the L2C SRAM as L2 cache.
- Configure DMA buffer in DRAM:
Set DRAM DMA to be non-cacheable to load blob correctly.
TEST=build pass, register(disable_l2c) read ok
BUG=b:317009620
Change-Id: I6a3cb63d3418f085f5d8d08b282dd59ea431c294
Signed-off-by: Jarried Lin <jarried.lin@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83925
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
To reduce duplicate pad_func of MediaTek SoCs, move the pad_fun to a
common directory.
TEST=Build pass
BUG=b:317009620
Change-Id: I145233ef887a38251e8fc129b8357f236c5f7a2b
Signed-off-by: Jarried Lin <jarried.lin@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83989
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
When the config of MCU firmware blob such as CONFIG_SPM_FIRMWARE is
non-empty, we should always expect the file to exist. Similarly, since
the device is unlikely to boot without the DRAM blob (assuming MRC_CACHE
doesn't contain valid memory training data), dram.elf should always
exist as well.
Therefore, remove the check for the existence of the blobs. Build would
fail if any of the blobs is missing.
Change-Id: I755e7c5a70b34b0c3d3915ab339c65263688aad7
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84053
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This will not succeed in compiling on all target and compiler
combinations but at least gets the ball rolling. The change is not
invasive.
Some notes:
- GCC has issues with LTO on ARM
- Clang uses LLD automatically on some arch
- Clang with LTO fails on x86 as it forwards the linking to GCC for some
reason
- SMM building succeeds but the binary is empty
Change-Id: Ieb9204777fd349542744a8946e2207731c37969c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84003
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Add get_wifi_sar_cbfs_filename(). This function uses the FW_CONFIG
for WIFI_CATEGORY to choose the right wifi_sar hex file.
Below is the file mapping:
wifi_sar_0.hex = wifi6
wifi_sar_1.hex = wifi7
BUG=b:345596420
TEST=emerge-nissa coreboot chromeos-bootimage
Cq-Depend: chrome-internal:7607427
Change-Id: If8339a2a1d32d3e885ef87ea2ec2847f107f1fbd
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84051
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Iccmax of VccIn_Aux is 25A with MBVR design.
BUG=b:348258637
TEST=Local build successfully and boot to OS normally.
Change-Id: I59c420c03a8f01d185f616a2212798266b4251e0
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83986
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>
Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
EE change GPP_C1 from pull-up to OD&no pull-up in PCH GPIO Table.
BUG=b:358472598
TEST=Build and verified test result by EE team
Change-Id: I84d1b42a39bebbcd610cebc46f979018fc79238f
Signed-off-by: Roger Wang <roger2.wang@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83904
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Some targets cannot be supported by clang as clang generates slightly
larger binaries which the hardware won't accept. This is usually the
case with CONFIG_CHROMEOS.
Change-Id: I88cf8ce16fb6c61c19d615e396f5871179b06fc8
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69747
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
PCIE WLAN Bluetooth is on port8, need to correct USB port for PCIE WLAN
bluetooth companion device.
BUG=b:345596420
TEST=Build and test on nivviks, check BRDS is shown in SSDT.
Change-Id: I0908ff500434401bf89a5313427cf304f32cf929
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84021
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
PCIE WLAN Bluetooth is on port8, need to correct USB port for PCIE WLAN
bluetooth companion device.
BUG=b:345596420
TEST=Build and test on revin, check BRDS is shown in SSDT.
Change-Id: Ie8174567b863e1afe8b0a27e644e24e9d3de6d19
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84020
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
The current region_end() implementation is susceptible to overflow
if the region is at the end of the addressable space. A common case
with the memory-mapped flash of x86 directly below the 32-bit limit.
Note: This patch also changes console output to inclusive limits.
IMO, to the better.
Change-Id: Ic4bd6eced638745b7e845504da74542e4220554a
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79946
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
A few differences with the original link targets:
- 'libs' is now supported on all arch even though only x86 uses it
- compiler_rt is included on arch that previously did not (arm). This
however has no impact as there compiler_rt is not defined for those
arch in xcompile
- LIBGCC_FILE_NAME_bootblock is not included, but this was not defined
anywhere so this is a noop
Change-Id: I64f7686894c99732d06972e7ba327061db6d7c44
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83574
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This removes the boilerplate --oformat out of the makefile.mk
Change-Id: Ib78934fff4a31c4375da2038efca5027b813b07b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83999
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Add the condition of unprovisioned fw_config to enable all storages
and devices. It's for first boot on all storags and preliminary test
in factory when fw_config is unprovisioned.
BUG=None
TEST=Build jubilant firmware and boot to OS on storages when fw_config
is unprovisioned and ensure all devices are enable.
Change-Id: Ia14632744c34548e2c201dfc58d82515cdd02df0
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84002
Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Storage devices are very critical to boot to OS. When probe list is
defined for storage devices, all of them get disabled when fw_config is
unprovisioned - a typical situation in the factory. Fix this by
configuring the storage devices in device/override tree to probe and
enable them when fw_config is unprovisioned.
BUG=None
TEST=Build Brox firmware and boot to OS when fw_config is unprovisioned.
Change-Id: I0537f7d1d83293b9b3408f0aadf11fa2e7908163
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83984
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Bob Moragues <moragues@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When fw_config is unprovisioned (eg. in the factory), devices that do
not have any probe list are enabled by default and those that have probe
list are disabled. On mainboards that support multiple types of boot
critical devices (eg. storage) through probing fw_config, all of
them are disabled when fw_config is unprovisioned. Hence the devices do
not boot to OS. Add sconfig fw_config rule `probe unprovisioned` to
enable such devices when fw_config is unprovisioned.
BUG=None
TEST=Build Brox firmware and boot to OS when fw_config is unprovisioned.
Change-Id: I178f821e077912776d654971924d67203a7c43df
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83983
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Since the voltage value measured by the USB2 pin of the wlan is 500mv,
it does not meet the design requirements. Adjusting the port length
can reduce the voltage to 450mv, which meets the expected settings.
BUG=b:361037189
TEST=1. The voltage measurements are as expected.
2. The Bluetooth and WiFi functions of the wlan module are
verified to be normal.
Change-Id: Icd1ec3b561ee5b3f55e5f97a56fd9cb7df893508
Signed-off-by: zengqinghong <zengqinghong@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84001
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
Enables early serial console for debugging.
TEST=build/boot drobit, verify console output available starting in
bootblock on CPU UART (/dev/ttyUSB1) vs ramstage.
Change-Id: If94eb8caca3469143433fef06b972050f886be6a
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83995
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
These field defines are SOC-specific. The AUX bias virtual wire field
positons are shifted in PTL.
In MTL SOC and older:
7:0 GROUP_ID Group ID in PCH GPIO
10:8 BIT_NUM Data bit Position in PCH GPIO
23:16 VW_INDEX VW Index in PCH GPIO
In PTL SOC:
15:0 GROUP_ID Group ID in PCH GPIO; targeted SB_PORTID
18:16 BIT_NUM Data bit Position in PCH GPIO
31:24 VW_INDEX VW Index in PCH GPIO
BUG=361048817
TEST=boot to OS and use iotools to read AUX Bias Ctrl register to
verify the group ID, bit number, and vw index.
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: I0f9c895590465b2f539c91834cf331fcd7efa996
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83980
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
This mainboard does not have AT24RF08C (Asset Identification EEPROM) and
will show "*INVALID*" in the SMBIOS table.
Change-Id: If6f948bc4c63c7afdc8b31e1945d3c3beb99883f
Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83994
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Enable Intel CrashLog diagnostic feature by default on all Google
Dedede variants.
BUG=b:354834461
TEST=Built for Google Dedede and verifed that CrashLog is enabled by
default.
Change-Id: Ib0487bd6a5bfdad2a80fd0787e009e48f4527d38
Signed-off-by: Jędrzej Ciupis <jciupis@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83885
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
Extend support for CrashLog to Intel Jasperlake based platforms.
This commit is based on 15cbc3b599,
originally reviewed on https://review.coreboot.org/c/coreboot/+/49943.
BUG=b:354834461
TEST=CrashLog can be enabled in Kconfig for Jasperlake based platforms
and can generate a BERT table, if enabled.
Change-Id: Ia18a79d8de849d556b4b8fd0e6b43090311eb23f
Signed-off-by: Jędrzej Ciupis <jciupis@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83884
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
This patch extends the eSOL implementation on Alder Lake to render text
messages during late CSE sync (from ramstage).
Currently, the eSOL is limited to the early boot phase (until romstage)
and only displays FSP-M memory training warnings or messages during
early CSE sync (at romstage).
Platforms like Nissa/Nirul and Trulo, which use CSE sync from ramstage,
cannot display any eSOL messages, resulting in a brief black screen
during CSE firmware updates.
This patch implements the following logic to scale eSOL for late CSE
sync (at ramstage) without recompiling eSOL code for ramstage:
1. During boot, check if the MRC cache is available. This indicates the
need for memory/DRAM training and triggers an eSOL message.
2. For CSE lite SKUs (applicable to CrOS), leverage the
`is_cse_fw_update_required` API to check if the current CSE RW
firmware version differs from the CBFS metadata file version.
If so, trigger an eSOL message indicating a CSE sync is required.
3. If either condition #1 and/or #2 is true, the AP firmware renders
an eSOL text message using LibGfxInit for the Alder Lake platform.
BUG=b:359814797
TEST=eSOL text messages are displayed during CSE sync and FSP updates.
tirwen-rev3 ~ # elogtool list
0 | ... | Log area cleared | 4088
1 | ... | Early Sign of Life | MRC Early SOL Screen Shown
1 | ... | Early Sign of Life | CSE Sync Early SOL Screen Shown
2 | ... | System boot | 197
3 | ... | Memory Cache Update | Normal | Success
4 | ... | System boot | 198
5 | ... | Firmware Splash Screen | Enabled
Change-Id: I1c7d4475ed5cf6888df1beebab0641ee4203b497
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83975
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Pranava Y N <pranavayn@google.com>
