This way we can fit a kernel and initramfs on the dongle's free ~3.75MB space
and have a debug system bootable right from inside the dongle. The start
address of the dongle is mem@0xffc00000 for FILO with 4MB minus ROM area
available.
This should be a no-op when not booting from the dongle.
Signed-off-by: Mart Raudsepp <mart.raudsepp@artecdesign.ee>
Acked-by: Ward Vandewege <ward@gnu.org>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@660 f3766cd6-281f-0410-b1cd-43a5c92072e9
Set manual settings for dbe62 PLL; the auto settings are giving
slightly wrong values
Add call to dumplxmsr in dbe62 initram main()
Change dumplxmsr to void parameter
Add dumplxmsrs function to geodelx raminit support code
Correct spelling of CAS.
The big one: set spd variables correctly.
The not so big one: there is a bug in com2 enable I don't understand.
For now comment out two offending lines. The cs5536 debug prints
should be reduced later.
Change fuctory to factory. It's funny but confusing.
This patch also takes into account carl-daniel and uwe's comments.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@649 f3766cd6-281f-0410-b1cd-43a5c92072e9
Tested on real hardware, some weirdness remains, probably related to
IRQ routing.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Marc Jones <marc.jones@amd.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@643 f3766cd6-281f-0410-b1cd-43a5c92072e9
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Tested on dbe62. I had to run cs5536/stage1.c through indent -kr -i8 because emacs is somehow
confused by parts of it. Weird. indent made some parts ugly, at least to my eyes. Oh well.
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@638 f3766cd6-281f-0410-b1cd-43a5c92072e9
This includes:
- the working power button patch.
- onchipuart2 for very early startup -- this will be replaced with a better mechanism soon.
- dts mod for powerbutton on cs5536
- dbe62 dts fix for COM1 setup
- ram check call in dbe62 initram.c
- Carl-Daniel's fix to detect incorrect access to spd variables.
- more debug prints in geodelx northbridge support code.
This is cumulative since we're lagging on acks a bit and it's hard to keep this
stuff all seperated out since it involves a common set of files. I'd like to get
it acked and in tree today if possible. It's a very small set of lines changed so please
forgive me for the cumulative nature.
Thanks
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@636 f3766cd6-281f-0410-b1cd-43a5c92072e9
Compile tested on norwich, alix1c and dbe62. msm800sev is not affected
and dbe61 is broken anyway.
svn is unable to create a valid patch for what I did, so I'll have to
commit this myself. To reproduce, perform the following commands, then
apply the patch:
svn mv mainboard/amd/norwich/irq_tables.c mainboard/amd/norwich/irq_tables.h
svn mv mainboard/pcengines/alix1c/irq_tables.c mainboard/pcengines/alix1c/irq_tables.h
svn mv mainboard/artecgroup/dbe61/irq_tables.c mainboard/artecgroup/dbe61/irq_tables.h
svn mv mainboard/artecgroup/dbe62/irq_tables.c mainboard/artecgroup/dbe62/irq_tables.h
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
tested on alix1c. Boots, USB, graphics, and ethernet all work.
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@628 f3766cd6-281f-0410-b1cd-43a5c92072e9
making sure we return 0xff for nonexisiting entries and shrinking the
data structure by 85%.
As a bonus, the various initram.c for boards with fake SPD are now
almost identical.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Tested on Alix1c, with minor mods to get it to compile. Full boot to
Linux, with graphics.
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@622 f3766cd6-281f-0410-b1cd-43a5c92072e9
Signed-off-by: Marc Jones <marc.jones@amd.com>
Acked-by: Peter Stuge <peter@stuge.se>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@619 f3766cd6-281f-0410-b1cd-43a5c92072e9
in the pci dtc instead of the correct location in the domain.
Also fixed up some warnings on the const gliutable.
Tested on alix1c and boots to Linux, ethernet works. Still trying
to light up the display :-)
Signed-off-by: Marc Jones <marc.jones@amd.com>
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@617 f3766cd6-281f-0410-b1cd-43a5c92072e9
Note: You MUST have the later AMD VSA code that does not call bios
interrupts. If you use the older code, your boot will hang at this
point:
buf[0x20] signature is b0:10:e6:80
Call real_mode_switch_call_vsm
With post code 10
Signed-off-by: Marc Jones <marc.jones@amd.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@616 f3766cd6-281f-0410-b1cd-43a5c92072e9
correct, and then populate the rest of the files. I am putting this in
now so others can help get the timing right.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Marc Jones <marc.jones@amd.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@614 f3766cd6-281f-0410-b1cd-43a5c92072e9
target does not yet compile due to initram breakage, but the breakage is
really old.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Marc Jones <marc.jones@amd.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@609 f3766cd6-281f-0410-b1cd-43a5c92072e9
the new settings as close as possible to the old settings.
All GeodeLX-based boards now include the geodelx/domain, geodelx/apic
and geodelx/pci dts files.
Remove "enabled" keyword from the alix.1c main dts. (That's the only
possibly critical change because it affects a working target. Tests on
hardware appreciated. Should be harmless, though.)
Compile tested only for msm800sev, norwich and dbe61, and the situation
is better than without the patch.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Tested and boots a working linux on alix1c.
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@607 f3766cd6-281f-0410-b1cd-43a5c92072e9
code boots and works on qemu and
alix1c. It represents a huge change and a huge improvement. There are a
few fixes left to do, which
will come once this is in.
This change started out easy: get the device IDs OUT of the the dts, and
into one place. We
decided the device IDs should be in the constructors ONLY. To make a
long story short, that just did
not work out, and it revealed a flaw in the design. The result?
- no more ids in the various dts files.
- the constructor struct is gone -- one less struct, nobody liked the
name anyway
- the device_operations struct now includes the device id.
- constructor property no longer used; use device_operations instead.
- lpc replaced with ioport
All the changes below stem from this "simple" change.
I am finding this new structure much easier to work with. I hope we're
done
on this for real, however!
TODO:
1. Change limitation in dtc that makes it hard to use hex in pci@
notation.
Now for the bad news. Sometime today, interrupts or io or something
stopped working between r596 and r602 -- but I did no commits at
that point. So something has gone wrong, but I don't think it's this
stuff.
I did try a build of HEAD, and it fails really, really badly. Much
more badly than this fails, so I think this commit is only going
to improve things. It does work fine on qemu, fails on alix1c,
so I suspect one of today's "clean up commits" broke something.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@603 f3766cd6-281f-0410-b1cd-43a5c92072e9
in dts. This gets rid of the ugly pcipath etc. properties.
So, instead of
somedevice {pcipath="1,0";};
We say pci@1,0{ etc. etc. };
As per my agreement I agree to document this in the design doc.
The alix1c compiles but is untested, and will probably need some work.
I will do these additional tasks on friday.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
M include/device/path.h
Add LPC path type, replacing SUPERIO path type, since SUPERIO is only
one type of LPC. Clean up tabbing in parts of the file (cosmetic).
M mainboard/emulation/qemu-x86/dts
Modify this dts for the new path naming scheme.
M device/pci_device.c
Change what used to be a BIOS_ERR (but is no longer) to a BIOS_NOTICE.
The change is that the device tree includes more than just PCI devices,
so finding a non-PCI device is no longer fatal; a notice is useful.
M device/device_util.c
Add string creation for PCI_BUS nad LPC.
M northbridge/intel/i440bxemulation/dts
Add ID info for the chip.
M northbridge/intel/i440bxemulation/i440bx.c
Change initialization so it is explicitly for the .ops struct member.
M util/dtc/flattree.c
Add support for the new path naming scheme.
I'm in the middle of this commit so I'll fix the hard-coded lengths
next commit.
Also delete dead code between #if 0 and /* and //
M util/x86emu/vm86.c
comment out unused variables. these may someday be use, not ready
to delete them yet.
M Makefile
Change -O2 to -g. We need debugging on LAR far more than we need performance.
git-svn-id: svn://coreboot.org/repository/coreboot-v3@593 f3766cd6-281f-0410-b1cd-43a5c92072e9
from v2 to install them. Linux boots fine and all interrupts
seem to work correctly -- the network comes up, USB hot plug works,
I can mount the USB disk, etc.
To enable pirq tables for a given mainboard, simply add the
select PIRQ_TABLE (see below) to the Kconfig for that board.
Again, this code builds and boots linux on the alix1c.
I think, with this change, we are very close to moving ALL LX boards to
v3 and deprecating v2. The major remaining fix is to add an empty LAR
entry to fill empty space in LAR and speed up the LAR file search
process.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
Index: include/tables.h
Add prototype, conditioned on CONFIG_PIRQ_TABLE
Index: util/x86emu/vm86.c
Comment out 'debug trap' code that scribbles vectors at 0x4000.
I don't know why this is here, but I'd like to leave it #if'ed out --
somebody, at some point, thought we needed it. To reenable, we will need
to move stage2 code or these magic vectors.
Index: arch/x86/Makefile
Add support for conditional compilation of pirq support code.
Index: arch/x86/pirq_routing.c
Add this file from v2.
Index: arch/x86/archtables.c
Add call to write_pirq_routing_table (controlled by #ifdef
CONFIG_PIRQ_TABLE)
Index: arch/x86/Kconfig
Add new config variable: PIRQ_TABLE
Index: device/device.c
Fix some trivial bugs.
Index: mainboard/pcengines/alix1c/Makefile
Add pirq table code for stage2
Index: mainboard/pcengines/alix1c/dts
Modify dts to properly set southbridge variables
Index: mainboard/pcengines/alix1c/irq_tables.c
Add code from v2 for the alix1c.
Index: mainboard/pcengines/Kconfig
Add 'select PIRQ_TABLE'
Index: include/arch/x86/pirq_routing.h
Add include file from v2.
Remove all the SLOTCOUNT nonsense. This hack was only needed
for a very early version of gcc 3.x, where they screwed up the
creation of struct members that used the [] syntax for variable-length
array at the end of the struct.
Index: include/device/pci.h
Add prototype
git-svn-id: svn://coreboot.org/repository/coreboot-v3@582 f3766cd6-281f-0410-b1cd-43a5c92072e9
to a board should add a defconfig in mainboard/vendor/board/defconfig.
I think that the defconfig should:
1. Use the ROM size that comes with the board
2. Enable compression
3. Not include a payload
This will make it easy for buildrom or anyone who wants to build it
manually to use lar to add their payloads. It also allows buildrom to
keep the configs in the coreboot tree.
The patch also adds mainboard/emulation/qemu-x86/defconfig
Signed-off-by: Myles Watson <myles@pel.cs.byu.edu>
Acked-by: Ward Vandewege <ward@gnu.org>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@578 f3766cd6-281f-0410-b1cd-43a5c92072e9
Press <Enter> for default boot, or <Esc> for boot prompt...
boot: hda1:/vmlinuz root=/dev/hda1 console=tty0 console=ttyS0,115200
malloc_diag: alloc: 240 bytes (3 blocks), free: 16136 bytes (1 blocks)
malloc_diag: alloc: 256 bytes (4 blocks), free: 16120 bytes (1 blocks)
file_open: dev=hda1, path=/vmlinuz
ide_probe: ide_probe drive #0
ide_probe: ctrl 1188096 base 0
find_ide_controller: found PCI IDE controller 1022:209a prog_if=0x80
find_ide_controller: primary channel: compatibility mode
find_ide_controller: cmd_base=0x1f0 ctrl_base=0x3f4
Sadly, it locks up at this point, but this is still progress.
I realize the location of the defines is a little odd, but I think it is useful to have
them right next to the function that uses them.
Index: southbridge/amd/cs5536/cs5536.c
cs5536.c: add ide support functions from v2
Index: mainboard/pcengines/alix1c/dts
Correct error in southbridge pcipath. Add enable_ide to dts.
Index: southbridge/amd/cs5536/dts
Add dts for enable_ide.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Corey Osgood <corey.osgood@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@575 f3766cd6-281f-0410-b1cd-43a5c92072e9
Due to some problems with PCI transactions, Geode LX needs the ROM cache properties to be write-serialize + cache disabled by runtime. More details below.
Add mainboard_pre_payload() call to each mainboard as the final coreboot function before the payload is called by stage1.
Note that this patch also grows the bootblock from 16K to 20K to make room for mainboard_pre_payload().
"The problem is a transaction depth issue and bottlenecks inside the GX
and LX that go across PCI. The conditions are very complicated but it
comes down to we need write serialization for writes to PCI. If you
look in the data book you can't have write serialization and the cache
enabled on a given area. During coreboot we don't have to worry about
a write or a PCI bus master so I think we can enable caching the ROM.
After coreboot we can't be sure what will happen in the system so we
need to set it up to be safe. For example flashrom just clears the
write protect bit. If the cache were enabled (no write serialization)
and flashrom was writing the ROM we would be in a precarious position.
A PCI bus master doing a read or a write that has a hit on a tag
would cause enough bottleneck conditions that it might hit the bug. We
could change flashrom but that doesn't help other tools. We need to
leave the system in a safe state. Also, caching the ROM after it is no
longer used doesn't make much sense. So, we need a call just before
the payload runs to clean up the system."
Signed-off-by: Marc Jones <marc.jones@amd.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@573 f3766cd6-281f-0410-b1cd-43a5c92072e9
released new-model VSA code.
Changes:
Index: util/dtc/flattree.c
Add an ID entry for apic properties.
Index: northbridge/amd/geodelx/apic
This is a new dts for the northbridge used as an APIC.
Index: northbridge/amd/geodelx/pci
This is a new dts for the northbridge used as a PCI device.
Index: northbridge/amd/geodelx/geodelx.c
Fix a non-obvious bug: we had set phase3 scan bus for both the
domain AND the PCI device, which is a mistake: can't scan from the
PCI device too.
Index: northbridge/amd/geodelx/domain
This is a new dts for the northbridge used as an pci domain.
Created via svn move dts domain
Index: device/pci_device.c
If there are leftover devices, it is now a warning, not an error,
since there are
some no-pci devices in the tree now. For future: only complain about
leftover PCI devices ...
Index: device/device.c
make devcnt a global and initialize it in init_dev. Add a debug printk.
Index: mainboard/pcengines/alix1c/dts
Add an 'apic' entry for the mainboard. This actually looks pretty clean
to me, the way it went in.
Index: northbridge/amd/geodelx/vsmsetup.c
Delete all pcibios int support, no longer needed for VSA.
Please note that this patch includes Carl-Daniel's improvements
below, which I have Ack-ed.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
A few minor comments. It would be great if you could address them before
committing.
northbridge/amd/geodelx/domain is a copy of northbridge/amd/geodelx/dts.
You probably want to use "svn mv" for that because it preserves history
and the old file was probably intended to have been moved, not copied.
northbridge/amd/geodelx/vsmsetup.c:247: warning: ‘biosint’ defined but
not used
Since the new VSA does not use BIOSINT services anymore, deleting
biosint and related functions from vsmsetup.c would shrink vsmsetup.c by
one fourth. Patch follows (could you merge it into your patch?):
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@571 f3766cd6-281f-0410-b1cd-43a5c92072e9
- I left LB_TAG_ intact because they are used by the payloads
- file renames are still missing. see next commit
- some lb_ renames might be missing. feel free to provide patches.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@564 f3766cd6-281f-0410-b1cd-43a5c92072e9
northbridge has several constructors, so it is required, if these
constructors
are to be compiled in to the running image, that a dts be provided.
To use the dts, one must add a /config/ line to the components
that use it, hence the change to the mainboard dts .
This change does not produce a working bios as far as I can tell.
But it is still important to have it in.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://coreboot.org/repository/coreboot-v3@555 f3766cd6-281f-0410-b1cd-43a5c92072e9
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@542 f3766cd6-281f-0410-b1cd-43a5c92072e9
_MAINOBJECT #defined. Calls from all other files ended up in nirvana
because the compiler was not able to calculate the address of the
wrapper for the absolute call. The linker tried, but failed miserably.
Use the -combine flag and compile all of initram at once. This enables
GCC to calculate the address of the abscall wrapper, resulting in
working code.
Segher Boessenkool thinks the patched code works only by accident
because GCC has no way to specify generation of XIP code. According to
him, future GCC versions or other circumstances may break the code.
While this patch makes code work for now, it does NOT check whether the
generated code tries to write to memory outside the stack (general
writable data). That will of course fail, but I hope porters are smart
enough to avoid that.
Corey Osgood writes:
Great work tracking this down! This is okay for now, but we need to look
for a better solution in the future. Counting on porters who may or may
not remember this discussion to avoid something isn't good
future-proofing.
Checking the ELF sections for read-write data and stopping the build
with an error could make this future-proof.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Corey Osgood <corey.osgood@gmail.com>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@537 f3766cd6-281f-0410-b1cd-43a5c92072e9
may be due to miscompilation of XIP objects which do not have
_MAINBOBJECT defined. This issue was impossible to see on qemu because
no such object existed. Introduce initram_printktest.c in the Qemu
target, which will test for miscompilation and crash with a descriptive
error message.
This has been build tested and runtime tested on Qemu, and with my
compiler/linker combination it indeed crashes.
gcc (GCC) 4.2.1 (SUSE Linux)
GNU ld (GNU Binutils) 2.17.50.20070726-14 (SUSE Linux)
Trying with gcc-4.1 (GCC) 4.1.3 20070724 (prerelease) (SUSE Linux) and
the linker above had exactly the same results.
Unless we manage to fix the bug uncovered by this patch, leaving the
Qemu target in crashing state is the best thing we can do because this
behaviour mirrors the state of all other targets.
Ron says: I am comfortable with this. If hardware is broken, qemu should
be broken. I avidly wait the fix :-)
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@535 f3766cd6-281f-0410-b1cd-43a5c92072e9
across all of these makefiles. The rules are now in order of execution
during boot, that is:
STAGE0_MAINBOARD_OBJ
INITRAM_OBJ
STAGE2_MAINBOARD_OBJ
As added benefit, mainboard makefiles are now almost identical.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@533 f3766cd6-281f-0410-b1cd-43a5c92072e9
the x86 arch makefile. This makes porting to a new mainboard less
confusing.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@529 f3766cd6-281f-0410-b1cd-43a5c92072e9
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@525 f3766cd6-281f-0410-b1cd-43a5c92072e9
and create a valid LAR header with an entry value. This will fix the
problems Ron is having on the ALIX 1C and probably allow it to boot.
It also sets the text base of the .o to 0, instead of whatever wacky
value gld is choosing, so all platforms will have the same value.
Get away from worrying about potential gld bugs, now and in the future.
As added benefit, we obsolete a lot of code without introducing
new code.
Qemu target entry point debugging has been added to be able to spot
problems with entry points in the future.
This patch is a joint work of Ron and Carl-Daniel.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@523 f3766cd6-281f-0410-b1cd-43a5c92072e9
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@521 f3766cd6-281f-0410-b1cd-43a5c92072e9
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@519 f3766cd6-281f-0410-b1cd-43a5c92072e9
Makefiles clean and simple.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@517 f3766cd6-281f-0410-b1cd-43a5c92072e9
had _SHARED defined during compilation, each of them would contain an
assignment of stage0_printk to *printk. During linking, this caused
errors as multiple definitions of printk existed.
Make sure _SHARED alone gives you only the printk prototype, and iff
_MAINOBJECT is defined as well, include the assignment.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@516 f3766cd6-281f-0410-b1cd-43a5c92072e9
probably be factored out together with the rest of the lines in
mainboard/* later, but for now it'll do.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@515 f3766cd6-281f-0410-b1cd-43a5c92072e9
post_code.c (thus drop it from console.h).
Instead, have console.h #include post_code.h and drop other
explicit #includes of post_code.h in the code; console.h is already
included in pretty much every file.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@513 f3766cd6-281f-0410-b1cd-43a5c92072e9
This fixes for example printk calls from initram code.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@505 f3766cd6-281f-0410-b1cd-43a5c92072e9
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@502 f3766cd6-281f-0410-b1cd-43a5c92072e9
* statically link linuxbios.initram for now (depends on printk, post_code
and die)
* greatly simplify all makefiles by creating a global Rules.make
* use $(dir $@) in Makefiles instead of absolute paths for mkdir..
* clean up Makefiles by calling components' code locally instead of in the
Makefile. (Remember: one day, no code per mainboard)
* unconditionally create .xcompile in case it changed
* add NM to xcompile
* create $(obj)/linuxbios.map with all symbols of all stages
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@463 f3766cd6-281f-0410-b1cd-43a5c92072e9
