Update the SOC code based on the PPR for C1 stepping, doc 57238.
1. Turin CPU has less USB ports than Genoa, so the chip structure has
to reflect that. The number of ports has been reduced to match the
hardware capabilities.
2. Added early FCH initialization: legacy ISA devices, eSPI, I/O
decoding, UARTs, SMBus and SPI.
3. Updated AOAC device numbers.
4. Updated MMIO and I/O base addresses for CPU internal devices.
5. Added reserved RAM and MMIO reporting.
6. Adjusted root complex layout to match Turin IOHCs base addresses
and fabric IDs.
7. Extended chipset.cb devicetree to match the layout of devices on a
single socket Turin system.
Change-Id: I5272c1f2cd2aa259569d0bc6fa5c4073907b1673
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/88708
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
ESPI1 MMIO is reported in ACPI already, but the resource allocator
must also know about it to avoid the allocation of resources in that
range.
TEST=Boot Gigabyte MZ33-AR1 and verify that ESPI1 address (0xfec30000)
is reported for PCI device 00:00.14.3 in coreboot logs:
dev: PCI: 00:00:14.3, index: 0x3, base: 0xfec30000, size: 0x1000
Change-Id: Ic4024e6aa37bd7568dcecbd7cae29be9ae587a7f
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/90853
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
fwupd checks SMBIOS Type 0 BIOS Characteristics Extension Byte 2 bit 3
(UEFI Specification Supported) when deciding if UEFI capsule updates are
supported.
Set the flag when coreboot is built with the EDK2 payload.
Change-Id: I4d24deeca88cde5411225f8d113704f5a04e8a34
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/90860
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Add support in mainboard to invoke LPASS Initialization.
Test=1. Create an image.serial.bin and ensure it boots on X1P42100.
2. Verified LP0 BCM vote using serial logs.
Serial Log:
[DEBUG] BCM: Found address 0x00050048 for resource LP0
[INFO ] BCM: Successfully voted for LP0 (addr=0x00050048, val=0x60004001)
3. Verified if the clocks are enabled by taking clock dump. Clock
enablement is verified by dumping the 31st bit of the corresponding
clock’s CBCR register. A value of 0 in bit 31 indicates that the clock
is ON. The register details are part of HRD-X1P42100-S1 document.
https://docs.qualcomm.com/bundle/resource/topics/HRD-X1P42100-S1/
Change-Id: Icdcb8176639d4c6d24ab6cd2741d7e44e2370eb0
Signed-off-by: Swathi Tamilselvan <tswathi@qualcomm.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/90852
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Add API support to enable LPASS core clocks and vote for LP0 BCM
resource required for LPASS. This change includes support to enable
audio clocks.
LPASS is Low Power Audio Subsystem that runs audio and voice
processing on a dedicated DSP. This enables low-power audio operation
while the main CPUs remain in low-power states.
Test=1. Create an image.serial.bin and ensure it boots on X1P42100.
Change-Id: If7684bee10d127866acac80e6aeefadaa177dc1f
Signed-off-by: Swathi Tamilselvan <tswathi@qualcomm.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/90851
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Let the user chose between 5500, 6400 and 7500MT/s.
Change-Id: I91171f252e83e409904031109ee084115f6b3708
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/90825
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This somehow lost a few bytes when initially addded, so restore
the whole binary that was originally generated with spd_tools.
Change-Id: I7aa828c8e358a0d40597a265a8fc54e01ff105e8
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/90824
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Test if shellball extraction fails, and if it does, show the output of
the command and then exit, as nothing more can be done.
Change-Id: I0cd7416c988d11e019bfd0b4cd52af8811e6d1e2
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/90787
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Many newer ChromeOS recovery shellballs require 7z to decompress, so
add it as a dependency.
Change-Id: Ibe0391567736a39c31914c573b154d8ed7de617b
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/90786
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Refactor exit_if_dependencies_are_missing() to check all dependencies
in a single pass using an associative array, collect any missing ones,
and report them all together before exiting. This provides better UX
by showing all missing dependencies at once rather than exiting after
the first one.
This replaces the previous approach that would exit immediately upon
finding the first missing dependency, often causing users to run the
script several times to identify and install all missing dependencies.
Change-Id: Ieb03756b24fd2aa1af2c0ffaed717d06c9e85cbb
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/90785
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
The MTE_TAG_ADDR macro is no longer used after the changes in CB:90144.
Remove the unused definition.
BUG=b:438666196
TEST=util/abuild/abuild -x -t GOOGLE_SAPPHIRE -a --clean
BRANCH=none
Change-Id: Ic71fa22292793162de882d3c764e7805301250c5
Signed-off-by: Chen-Tsung Hsieh <chentsung@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/90864
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
The following error will be shown on non-NVMe SKUs.
[ERROR] DOMAIN: 00000000 missing read_resources
That's because when mainboard_needs_pcie_init() returns false, dev->ops
will be NULL, causing the '!curdev->ops || !curdev->ops->read_resources'
check to fail in device/device.c read_resources().
To prevent the misleading error message from showing up, for non-NVMe
SKUs, assign 'noop_domain_ops' to dev->ops.
BUG=none
TEST=emerge-tanjiro coreboot
BRANCH=rauru
Change-Id: If0f81aadda3fbde99f4df794cbdd885a607c9625
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/90843
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Chen-Tsung Hsieh <chentsung@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add a copy of genoa_poc OpenSIL directory with all genoa occurrences
changed to turin. Submodule has been omitted. Adjustment for Turin
OpenSIL will be made in subsequent patch.
Change-Id: I71e3b85f162971d6497783d4631a33780dc0e560
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/90369
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch adds google_chromeec_set_lightbar_rgb() to allow mainboards
to manually control the individual LED colors. This is useful for
providing visual feedback during early boot or platform-specific
events, such as low-battery warnings.
TEST=Build and boot google/fatcat.
Change-Id: I146006511ea727787ea496b0674b67fa950ce8f2
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/90807
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Update QUPV3_2_SE4 (ADSP I2C) configuration to use MIXED mode
instead of GSI. This allows the I2C controller for the charger
and fuel gauge to handle both GSI (DMA) and non-GSI transfers,
ensuring better compatibility during different boot stages.
BUG=b:472358270
BRANCH=None
TEST=TBD.
Change-Id: Ie2ed3cd6991c3d98b7902c1331e68ec5a4f35d92
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/90796
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jayvik Desai <jayvik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
This makes it runtime configurable; disabling it can save around
100ms boot time.
Change-Id: I9cddb07fc2e7caf754fa8d665249536c4885a4fe
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/89918
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Set the default for ASPM to ASPM_L0S_L1 rather than ASPM_AUTO, as
using AUTO won't always enable ASPM for some SSDs (Western Digital).
Test=build and flash starbook/mtl; check new default is ASPM_L0S_L1
in edk2 menu.
Change-Id: If66dcabe5eca717565e0378ab36db8a4cb220d43
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/90838
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
If the board has a fan, set the default profile to Performance. If not,
use Balanced.
Change-Id: I8adb22f38a8aec55ed86a3aa29e8abfde5670867
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/90837
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
More complex systems, such as servers, have multiple IOMMUs. For
example, Turin CPUs have a total of 4 IOMMUs per socket. Abort IVHD
generation only if IOMMU is not present on domain 0. For other domains
simply continue the loop, so that other domains have their IOMMUs
described properly in the IVRS. To keep simple systems working as
before, IVHD generation is aborted, if IOMMU is not present in domain 0.
TEST=See IOMMUs on domains 1,3,4,6 being skipped during IVHD generation
instead of IVHD generation being aborted on domain 1 on
Gigabyte MZ33-AR1 console log.
Change-Id: Icd3a51621908dc3ee5c85aa1e5814f3b3ac69007
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/89111
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit introduces support for touch functionalities on the
ocicat board. Changes include:
- Support for touchscreen devices in THC-I2C
- Wake support from S0ix state for touchscreen
- PMC GPE DW0 is reconfigured to GPP_F for Touchscreen in
variant.c for wake support
BUG=b:444942125
TEST= Build Ocicat and Test wake from S0ix state via touchscreen inputs.
Change-Id: Icf6fb0e170a64a5aec05590450a3bd40ab95cbf3
Signed-off-by: Pierce Chou <chou.pierce@inventec.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/90750
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Pranava Y N <pranavayn@google.com>
Reviewed-by: Avi Uday <aviuday@google.com>
Update the SaGV frequency registers in the devicetree as per
platform Plan of Record (POR) configuration:
- sagv_freq_mhz[1]: 3200 MHz -> 4800 MHz
- sagv_freq_mhz[2]: 6000 MHz -> 6400 MHz
- sagv_freq_mhz[3]: 6400 MHz -> 7467 MHz
The current frequency points were configured lower than the
platform's expected specifications.
BUG=None
TEST=Boot ocelot and verify that the system boots and MRC training
is successful for each SAGV point.
[SPEW ] Requested/actual ratio 72/72, Frequency=2400,
GearMode=1, RefClk=33MHz, tCK=3333333fs
[SPEW ] Requested/actual ratio 144/144, Frequency=4800,
GearMode=1, RefClk=33MHz, tCK=1666667fs
[SPEW ] Requested/actual ratio 192/192, Frequency=6400,
GearMode=1, RefClk=33MHz, tCK=1250000fs
[SPEW ] Requested/actual ratio 224/224, Frequency=7467,
GearMode=1, RefClk=33MHz, tCK=1071429fs
Change-Id: I7beab13bd9188aa47a45bc4a265aba75f00eded8
Signed-off-by: Appukuttan V K <appukuttan.vk@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/90688
Reviewed-by: Avi Uday <aviuday@google.com>
Reviewed-by: P, Usha <usha.p@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Pranava Y N <pranavayn@google.com>
As Panther Lake code is moving to a new phase, the full FSP headers,
including all the UPDs, can now be published. This CL is not tied to the
FSP update; it only provides the full list of UPDs for the current FSP
version 3442.07.
Details:
- FspmUpd.h : Expose all UPDs
- FspsUpd.h : Expose all UPDs
BUG=b:474393325
TEST=Build fatcat without any errors.
Change-Id: If02f9bf8d920497b0dcb52f5652839fae7fd0919
Signed-off-by: Alok Agarwal <alok.agarwal@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/90704
Reviewed-by: <srinivas.kulkarni@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Guvendik, Bora <bora.guvendik@intel.com>
Reviewed-by: Kim, Wonkyu <wonkyu.kim@intel.com>
Reviewed-by: Alicja Michalska <ahplka19@gmail.com>
Reviewed-by: Pranava Y N <pranavayn@google.com>
Reviewed-by: Sowmya, V <v.sowmya@intel.com>
Reviewed-by: Zhixing Ma <zhixing.ma@intel.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Occasionally when reading the EC version from ECRAM, the major
version fails to read and returns zero. To avoid having an incorrect
version reported, retry up to 10x with a 10ms delay between retries.
TEST=build/boot various Starlabs hardware, update the EC firmware,
verify the EC version is reported correctly every time.
Change-Id: I78d921e7230e8e180041097672661e744f70dde2
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/90834
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Adjust the FMAP to match a newer version of the descriptor generated
with mFIT.
Change-Id: I546697f5c3352358a715f8783a7eda650c771c78
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/90823
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Adjust the FMAP to match a newer version of the descriptor generated
with mFIT.
Change-Id: Id2eeec5269e8988e425e497f797645fa940922b3
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/90822
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Move the code that configures power limits, tcc and other power related
settings into common code. The end result is the same, but the PL4 is
set by reading the battery capacity, rather than being hardcoded.
This patch also appends `_group` to each form group, to avoid conflicts
with objects now visible with the extra headers.
Change-Id: I41235039bc984686fa43f5c712e836d0b8d5d24a
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/89775
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Remove the intermediate struct device's, and replace with the DEV_PTR
macro. This isn't a functional change, just cleaner.
Change-Id: I1a6a596a4d4215f6b670a8a7f7749a4f9bd391b0
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/90820
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Ensure the board can boot by limiting the power limits if the battery
is missing. This addresses the factory use case for Wildcat Lake
processors.
BUG=b:None
TEST= Use cutoff at-shutdown and reboot
The device should boot with reduced power limits value and the log
is as shown below
[INFO ] Battery not connected, booting with reduced PL values
[INFO ] Overriding power limits PL1 (mW) (10000, 15000) PL2 (mW) (35000, 35000) PL4 (W) (45)
Change-Id: Iadb9c4c8450e6a55dd9fc644785742cc7aafd671
Signed-off-by: Sowmya Aralguppe <sowmya.aralguppe@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/90755
Reviewed-by: Pranava Y N <pranavayn@google.com>
Reviewed-by: Avi Uday <aviuday@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
"-I$(cmockasrc)/include" should be added to TEST_CFLAGS if we are
building cmocka from source (i.e., USE_SYSTEM_CMOCKA is NOT 1). Fix the
condition in Makefile.common.
Change-Id: I957066fb24f03712a5b4b396aa9e04f3861940ee
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/90798
Reviewed-by: Hsuan-ting Chen <roccochen@google.com>
Reviewed-by: Jakub "Kuba" Czapiga <czapiga@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
From the Jenkins result of CB:90798, it appears that the generated
junit-tests_lib_ux_locales-test(tests).xml is not a valid XML file
possibly due to incorrect quotes handling by cmocka.
Therefore, in the UX_LOCALES_GET_TEXT_TEST macro definition, replace
`#_expect` with `_expect`, so that the `name` field of the CMUnitTest
struct won't contain double quotes.
Change-Id: Idfec437ae627208031854694e66ca79e22132385
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/90801
Reviewed-by: Jakub "Kuba" Czapiga <czapiga@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The current implementation uses '%*s' which treats the calculated
str_len as a minimum field width. If the underlying string buffer is not
null-terminated, printk will continue reading past the buffer until it
encounters a null byte.
Switch to '%.*s' to correctly use the precision field, which specifies
the maximum number of characters to be printed from the string.
BUG=None
TEST=Able to dump FSP performance data with `DISPLAY_FSP_TIMESTAMPS`
Kconfig selected and meeting the FSP prerequisites. Verify that the
performance data table is printed correctly.
```
[INFO ] +---------------------------------------------------+
[INFO ] |------ FSP Performance Timestamp Table Dump -------|
[INFO ] +---------------------------------------------------+
[INFO ] | Perf-ID Timestamp(us) String/GUID |
[INFO ] +---------------------------------------------------+
[INFO ] 0 1242275 SEC/52c05b14-0b98-496c-bc3b04b50211d680
[INFO ] 50 1242282 PEI/52c05b14-0b98-496c-bc3b04b50211d680
[INFO ] 40 1242284 PreMem/52c05b14-0b98-496c-bc3b04b50211d680
```
Change-Id: Id95bd34b9c7d45d2c363339eb18adc5ac731c72b
Signed-off-by: Pranava Y N <pranavayn@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/90788
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
The GPIO used for WOL was not configured to support WOL, so configure
this and adjust devicetree accordingly. Also, set the supported state
to S3, as coreboot disables this in S5.
Change-Id: Iaaac1aac3319473fe9e04f44043bf300620915cc
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/90791
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
On AMD glinda up to 3 CS# lines are available. Drive the correct
SPI flash chip select using register 0x1d when necessary. This
allows to modifiy the contents of the "backup" SPI flash when
booting from the primary SPI flash.
TEST=Can access backup SPI flash on AMD Glinda SoC.
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I446ef54a27c7a29155948cef9219cdef7b52b776
Reviewed-on: https://review.coreboot.org/c/coreboot/+/90779
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The PSP can choose the SPI flash to boot from. One such case
would be a corrupted EFS or invalid PSP directory tables.
Read the active SPI CS index from register SPI_ALT_CS_REG and
use it in boot_device_spi_cs().
Register name is taken from Linux kernel.
TEST=Booted on AMD/glinda with EFS on SPI CS0 corrupted. Will
boot from SPI CS2 and log shows:
spi_init: Booting from SPI CS2
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I2c806d4d1563aa2403e84dec9f8768081e5e208a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/90778
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
To allow payloads to run MIPI panel power-off commands, create a new
LB_TAG_PANEL_POWEROFF record and pass it to payloads.
BUG=b:474187570
TEST=emerge-jedi coreboot
BRANCH=skywalker
Change-Id: Ie11e1e78129188cc26d56764449fbafafa8fa316
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/90768
Reviewed-by: Chen-Tsung Hsieh <chentsung@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add DSI power-off commands for TM_TL121BVMS07_00C, so that payloads can
run it to properly disable the display.
Also refactor the init commands using MIPI_DCS_* macros to improve
readability.
BUG=b:474187570
TEST=emerge-jedi coreboot libpayload
BRANCH=skywalker
Change-Id: I0e7da1d23c658d7f3594cbb651c229057810319c
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/90740
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Chen-Tsung Hsieh <chentsung@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add verification to ensure that the integrated GPU is available,
avoiding crashes in FSP-M and FSP-S. The problem was first identified
on Skylake systems where the iGPU is missing or disabled, particularly
when VT-D is enabled, which can cause FSP-S to hang during boot.
Enabling SGX hides the issue, but it also leads to unstable
virtualization.
Apply the fix to Alderlake, Cannonlake, and Tigerlake SoCs in addition
to Skylake.
TEST=Build and boot to OS (Windows, Proxmox). Check to verify
functions work. (Skylake H110 + Xeon E3-1245 V5, E3-1260L V5,
i7-6700K, i3-7100)
Change-Id: I394f46ed5a277218a8dd587705eaecabe59fd110
Signed-off-by: Ulysse Ballesteros <ulysseballesteros@gmail.com>
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/89821
Reviewed-by: Walter Sonius <walterav1984@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Alicja Michalska <ahplka19@gmail.com>
List of changes:
- Increase the delay between romstage and ramstage GPIO init sequence.
- Delay the USB host initialization to meet the timing requirements.
BUG=b:475214332
TEST=Verify USB 3.0 storage key detection on Google/Quartz.
Change-Id: Ib6044b1e65fe0fe2fde5b688a9491d6e3fc75727
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/90758
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
On mc_ehl6/7 mainboards, the internal GPIO pull-up is required for the
SD card "Card Detect" signal to function properly.
This patch updates the GPIO configuration accordingly.
TEST=Booted mc_ehl6 and verified the voltage level at the
relevant pin before and after the patch.
Change-Id: I96a381f100dd9886ced030434316125d60a13a72
Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/90769
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
On this board, different I2C controllers must be activated and a
different RTC chip is used compared to mc_ehl1.
TEST=Booted into OS and verified that all relevant devices are detected.
Change-Id: If2990b7d8d599c6e5f5841d8018d2a3f00dbc515
Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/90766
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
