selfboot() doesn't really need to be architecture dependent. All
architectures are essentially doing the same thing with a normal
function call, only x86_32 needs an extra attribute. arm64 and x86 also
previously haven't been passing the coreboot table pointer, even though
they should. This patch fixes that.
Change-Id: If14040e38d968b5eea31cd6cd25efb1845a7b081
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/86142
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add initial override devicetree for dirks based on the
latest schematic (0W4_TWL_A_MB_0120.pdf).
- Add eMMC DLL tuning value (copy from riven)
- Configure I2C buses
- Configure USB ports
- Configure audio codec
- Configure WIFI6(CNVi) and WIFI7(PCIe)
Note :
There will be a separate CL to configure the implementation of
repurposing the TCSS port to USB Type-A after FSP support is added.
BUG=b:389391653
TEST=none.
Change-Id: Ic0b80e3121d94ede771ecc30cf0c66a67b9a41d0
Signed-off-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/86250
Reviewed-by: Jayvik Desai <jayvik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Correct MMinfra vote register to fix MMinfra power off failure during
suspend.
BRANCH=rauru
BUG=b:377628718
TEST=Bootup OK and Suspend/Resume OK, with MMinfra kernel/vcp patch,
mminfra can be turned off to reduce power consumption by 50mW.
Signed-off-by: Guangjie Song <guangjie.song@mediatek.com>
Change-Id: I7c23c3c53c68b0de85d8b6189b685de7f8398e8b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/86342
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
To fix the SPMI-P glitch, the driving strength of SPMI-P needs to be set
to a maximum value of 16mA. Additionally, a hardware solution of
external pull-down is also required.
BRANCH=rauru
TEST=Build passed and booted successfully. The platform remained idle
for approximately 20 hours without hang.
BUG=b:383634290
Signed-off-by: Lu Tang <lu.tang@mediatek.corp-partner.google.com>
Change-Id: I131fd04c0313c7ed64bbd123f61d9a6849c8def4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/86341
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
The code flow isn't that obvious in the beginning. You pass an address
of the VBIOS to FSP, but don't load any VBIOS until BS_DEV_RESOURCES
phase.
Add comments to document what is done and when. This will help to
improve the code in the next step.
Change-Id: I643bc9088306d99cc0fbb79648809e16b068fb33
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/86298
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Move all of the EC-related CFR options into a header in the ec
directory, so it can be reused across multiple boards.
TEST=build/boot starlabs/starbook_mtl,starlite_adl and verify CFR
options work properly.
Change-Id: I831559184de917b32e4993e8e34ffbc7b7e883e4
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/86318
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Adjust the POST brightness level in the VBT from 50 to 150 (max 255).
Change-Id: I1704a3479c38510b29427d582ee14c740401cd38
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/86345
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Desktop devices don't need and shouldn't define a lid switch.
TEST=build/boot starlabs/byte,starlite_adl
Change-Id: Iecf3e2558e244cc0bec301a505c0bc86684954aa
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/86322
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Commit `57aca97a2c` correctly changed the
reset types of GPIOs used in ACPI, but incorrectly set the pads to GPIO
mode, rather than ACPI mode.
This patch corrects that.
Change-Id: I7207d4d00e810c15d071eca0bea83796989e3735
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/86344
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
These are not connected, so configure them as such.
Change-Id: I5dfeb5c1503ca85baf3641f1f5803519ec517b81
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/86347
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
This commit adds power limit configurations for additional variants of
the Intel PTL-H platform found on Fatcat. Specifically, it adds entries
for PCI Device IDs 2, 3, and 4. These configurations define the PL1,
PL2, and PL4 power limits, as well as the associated CPU TDP and
power limits index. The PL4 values are currently placeholders and
marked for future fine-tuning.
BUG=b:395130929
TEST=Able to boot google/fatcat with 65W USB-C PD charger.
Change-Id: I86befb07f39a5e292365ea40ea08d0f93f38a7a6
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/86339
Reviewed-by: Jayvik Desai <jayvik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
The configuration used was copied from other boards in the tree,
NF1/NF2. However, no Intel documents says that GPP_E8 has a native
function.
As it remains unclear if the other boards in the tree are
misconfiugured, or the documents are incorrect, revert to a safe
configuration for the GPIO.
Change-Id: I49b8faa7f8712ad0ead22b7ccbfa6deca6046368
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/86332
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
The `.devices` line only had once space before the =, as the tab
boundary is directly after the s of devices. The lines above had once
space after the last tab, so the equal sign is closer to the left side.
As the whole file aligns the equal sign, replace the space by a tab, and
do *not* go the route of not aligning the equal signs.
Change-Id: Ic49dc56263cafce3cfe40bb3ed7036fa25300f9f
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/86335
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
This commit adds a new event type, `ELOG_TYPE_LOW_BATTERY_INDICATOR`,
to the event log. This event is logged when the system boots due to
a low battery condition. It includes the reason for the shutdown,
currently only supporting "Power Off".
BUG=b:339673254
TEST=Able to capture the eventlog for low battery boot event.
```
> elogtool list
9 | 2025-02-03 09:44:19+0530 | Low Battery Boot | Power Off
```
Change-Id: I5cc5e5f540657c7dfd174a4928e697a272da813a
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/86223
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
This patch disables eSOL Kconfig until the feature is ready in PTL
FSP-uGOP binary.
TEST=Able to build and boot google/fatcat to OS.
Change-Id: I99dd516816995b6cdfdcec618c06c7dbe061718a
Signed-off-by: Jayvik Desai <jayvik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/86314
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
1. Modify the I2C frequency of the touchpad to below 400 KHz to
meet the spec.
2. Modify the Thd dat of DATA between 0.3 us and 0.9 us to meet
the spec.
Before:
I2C5 - 407KHz
Thd - 0.06us
After:
I2C5 - 387Khz
Thd - 0.34us
BUG=b:391796230,b:391788680
TEST=Check that the wave form meets the spec.
Change-Id: I3c8c8d3b78236247ca7be810ac152085f615a6ef
Signed-off-by: Hualin Wei <weihualin@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/86324
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Qinghong Zeng <zengqinghong@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
With 8254 timer enabled, system would hang while entering s0ix state.
If we build coreboot with both timers =N, system enters s0ix state
(although it doesn't cut the power to the platform) and can be woken
up by pressing the key on the keyboard.
Since there's less potential for data loss in case of accidental
suspend, I think it makes sense to do it this way.
Change-Id: If6e0ac1d289447c292a49111251d321c951078e2
Signed-off-by: Alicja Michalska <alicja.michalska@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/86093
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The TCSS_XHCI controller has a single USB2 port followed by 4 USB3
ports; the XHCI controller has 12 USB2 ports followed by 2 USB3
ports. The topology was queried from the root hub on each controller
and returned via the descriptor.
Add the 2 missing USB2 ports to the XHCI controller and the one to
the TSS_XHCI controller.
TEST=build/boot Win11, Linux 6.x on starlabs/starbook_mtl.
Change-Id: I5dc97f150ff064d55e7969f10c1cea8ba72d6bfb
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/86319
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Measure mtk_fsp_load_and_run() execution time. This info helps AP boot
time analysis. The logs show as below.
[INFO ] mtk_fsp_load_and_run: run fallback/mtk_fsp_romstage at phase 0x30 in 0 msecs
[INFO ] mtk_fsp_load_and_run: run fallback/mtk_fsp_ramstage at phase 0x50 in 41 msecs
BUG=none
BRANCH=rauru
TEST=cbmem -1|grep "mtk_fsp_load_and_run"
Change-Id: I61706952bef4590c5bfd09707a08a4f1a25fbda2
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/86325
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Fix USB port assignments/descriptions to match actual topology.
TEST=build/boot Win11 on starlabs/starbook_mtl. Verify ports
match assignmented in devicetree using USBTreeview.
Change-Id: Ifb5ac4cf95c8f10706404479dea48ba20a90e286
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/86320
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Including the Virtual Button Driver made laptops report as a detachable
in tablet mode. Adjust how it's included, so they report as laptops.
Change-Id: Idc2076c400524744836e2f52124ccb8502622b04
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/86315
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Change the board type to ULX as seen in the AMI CRB. This fixes
failed memory training for certain memory modules.
Change-Id: I951387fcfc0be8fb931b4c5ac0b5f022e057b371
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/86310
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
These are not referenced anywhere, so remove them.
Change-Id: Ieb66099dcb9e13b26e6a7a752584537c060c8c18
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/86317
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reorder the PCIe reset before mtk_dram_init to overlap the de-assert
time with the DRAM initialization process. This change helps to optimize
the initialization sequence and reduce overall boot time.
BRANCH=rauru
TEST=Build pass
BUG=b:391333055
Change-Id: I24b254ff3a3cbe6d9a60a8e6afea2c621e0a07e2
Signed-off-by: Jarried Lin <jarried.lin@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/86311
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
This commit sets the TCC offset for the Fatcat baseboard variant.
A value of 10 was chosen, resulting in a TCC trip point of 100C
(Tjmax of 110C - offset of 10C).
This allows for thermal throttling to begin at a more appropriate
temperature.
Fatcat variants can override the TCC offset as per platform
requirements between power and/or performance.
TEST=Able to build and boot to CrOS.
Change-Id: I2a57fd3b06378f4e62872ffeb116a65561100e33
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/86292
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Add the support RAM parts for gothrax.
Here is the ram part number list:
DRAM Part Name ID to assign
MT62F512M32D2DR-031 WT:B 0 (0000)
H58G56AK6BX069 1 (0001)
K3LKBKB0BM-MGCP 2 (0010)
H9JCNNNBK3MLYR-N6E 0 (0000)
H9JCNNNCP3MLYR-N6E 3 (0011)
BUG=b:394756067
BRANCH=None
TEST=emerge-nissa coreboot
Change-Id: I9945ef9f8b9f5de8aedc34e4bc41c29a702be819
Signed-off-by: Yunlong Jia <yunlong.jia@ecs.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/86296
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit adds support for minimum/maximum limit values as well as
step sizes for CFR number options. Additionally, add a new flag that
specifies the option should be displayed in hexadecimal notation instead
of decimal.
Change-Id: I2e70f1430fb1911f1ad974832f8abfe76f928ac3
Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/86039
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Implements a way for CFR options to depend on another option
being set to one or more specific values. This is achieved
by writing a list of values as a varbinary struct.
Change-Id: Iaf7965551490969052eb27c207fa524470d4dd6a
Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/85987
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add a version field to the CFR root struct so parsers can check
compatibility when parsing structs.
Change-Id: Ifcb950f1bdedc0ab925f3841befb7e7001c0f7f4
Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/86080
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Linux complains in dmesg as a firmware bug that BSP is not the first
entry.
NetBSD hangs and OpenBSD panics early on boot.
With this patch I was able to boot NetBSD and OpenBSD on darp10-b when
loaded in GRUB.
Note: vanilla bootloaders for NetBSD and OpenBSD still result in an
apparent hang for an unknown reason.
Change-Id: I520a2e080c9f07a5866729ae2283990d20c0d691
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/86247
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Pull HPD (Hot Plug Detect) pin up in order to detect the panel.
BRANCH=rauru
BUG=b:376357839
TEST=Verify FW screen on Navi and Hylia
Change-Id: Ie11ceabad0b9872729125936d90b93b5d6d7cea6
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/86294
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The Rauru follower device goes `load switch` path to ensure the
discharge timing meets the panel power-off sequence. Refactor panel.c to
support this hardware change.
Remove PANEL from fw_config since this is a board-specific change.
BRANCH=rauru
BUG=b:339580836
TEST=verify firmware screen on Navi
Change-Id: I57dcaa2a0b5af94fe3fa3eaf04e9f3159c51d144
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/86282
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Previously, the lid switch could be set to not wake the system.
Add another option to ignore the switch entirely.
Change-Id: I1dd666a44b332ffbbef4420799eeffd746fd1664
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/86305
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add an option alongside the three existing curves to just turn
off the fan.
Change-Id: I39f6599056fe0116abbd7e2eb4084f77a7c395d3
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/86304
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Add rcomp configuration values taken from the AMI CRB. This fixes
failed memory training for certain memory modules.
Change-Id: If7a29bbd015d45eac178480ba6cae42912e25195
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/86307
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
The DDR5 modules have a speed size of 1024 bytes, not 512. Update
Kconfig to reflect this.
Change-Id: Ic7b691104ff8b0061a485f01709a2f53046cc94a
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/86306
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
To resolve the issue of not being able to boot from USB on Francka, the USB PHY settings need to be modified.
BUG=b:394206896
TEST=Build and test Type-A port function works fine
Change-Id: I140b8a2047768d3aeb0d5919aad998bd9dcd099f
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/86285
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Update sagv gears and frequency values as per recommendation
from power and performance team.
BUG=none
TEST=Boot to OS.
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: I315fcac387680df9312880120b7e6d33bded38e0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/86274
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
MAILBOXES_DESKTOP is unused, and the IGD opregion spec makes no
distinction in the mailboxes supported between desktop and mobile
platforms. Rename MAILBOXES_MOBILE to IGD_MAILBOXES for consistency
with other mailbox variables and clean up the comment.
Change-Id: Ia06fe75702887aa6953bf17bd4bc14af4038bec5
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/86279
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
IGD mailbox #2, Software SCI Interface, is not supported by coreboot
currently, as it requires supporting the Get BIOS Data (GBDA) and
System BIOS Callbacks (SBCB) interfaces. Since coreboot doesn't
support these, don't advertise mailbox #2 support.
This eliminates an error with the Linux display drivers:
"SWSCI request timed out"
TEST=build/boot Linux 6.9, Win11 on starlabs/starlite_adl
Change-Id: I8efcf9c5d384b6e0ce159d65cb1497c2e2e47f42
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/86276
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Intel's reference implementation in Slimbootloader pads the area
allocated for the extended VBT to the nearest 512-byte boundary, which
strongly suggests that the Windows driver expects the same.
TEST=build/boot Linux 6.9, Win11 on starlabs/starlite_adl, verify
VBT read properly by OS.
Change-Id: Ib3784eea6eb929ffec9672fc123b833c11c057e8
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/86275
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This has no noticable affect apart from being more consistant with
other boards.
Change-Id: Ia2d9284a7dfd29f47356860d6085c7aa5b94adb4
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/86289
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
