Disable FSP output when CONFIG_DEFAULT_CONSOLE_LOGLEVEL is not set to 8
(BIOS_SPEW). Use the console log level to choose between the serial
port address and NULL and pass it to FSP for the serial port address.
TEST=Build and run on Galileo Gen2.
BUG=None
BRANCH=None
Change-Id: I26b61715ba158389727dd332e20fe6c80bf23784
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/16005
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://chromium-review.googlesource.com/368404
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Add the pieces necessary to successfully build and run romstage using
the FSP 2.0 build. Because romstage is using postcar, add the postcar
pieces so that romstage can attempt to load postcar.
TEST=Build and run on Galileo Gen2
BUG=None
BRANCH=None
Change-Id: I7f6bb14c5c33f6ee1056623a5f6effc96e819b65
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15866
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://chromium-review.googlesource.com/368403
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Add the pieces necessary to successfully build and run bootblock using
the FSP 2.0 build.
TEST=Build and run bootblock on Galileo Gen2
BUG=None
BRANCH=None
Change-Id: Icb664d0c0b3d16171aba17cabc2e11b5fe202e61
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15865
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://chromium-review.googlesource.com/368402
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Wake status is calculated from the four pairs of gpe0 in
cbmem CBMEM_ID_POWER_STATE which is filled very early
in romstage and depends on the routing information in
PMC GPE_CFG register. Coreboot sets the proper value
of routing based on devicetree from pmc_init. But when
system goes to S3 on waking up PMC is writing default
values again in GPE_CFG which results in returning
wrong wake status in _SWS. This patch corrects that
behaviour by correcting the gpe0 pairs in cbmem after
PMC sets the routing table in resume path.
BUG=chrome-os-partner:54876
BRANCH=None
TEST=On resume through powerbtn, lidopen, keyboard press, etc.
we are getting proper wake status.
Change-Id: Ieac1f53975f9339ca0178fac3cdbdae4559b6901
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/16040
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Brandon Breitenstein <brandon.breitenstein@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/368367
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
For the gpio based irq to work, the ownership of the pad
should be changed to GPIO_DRIVER.
Provide an option in the gpio defs to configure the PAD onwership.
BUG=chrome-os-partner:54371
BRANCH=None
TEST=none
Change-Id: Ie69b9703b557ace44ebb6f7885b10ea31ced2bbf
Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com>
Reviewed-on: https://review.coreboot.org/15871
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-on: https://chromium-review.googlesource.com/368366
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
This corrects the address of the I2C5 Device. The I2C
Controller #5 is on PCI Bus 0: Device 25: Function 1. The ACPI
Address Encoding Logic is - High word = Device #.
Low word = Function #.
So, I2C5 (_ADR) = 0x0019 0001.
BUG=none
BRANCH=none
TEST=Build and boot kunimitsu
Change-Id: I67b639c99b2fd6a549ec6fb3cbb3666e82bf37a6
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Reviewed-on: https://review.coreboot.org/16048
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://chromium-review.googlesource.com/368364
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
This patch enables the CHROMEOS_RAMOOPS_NON_APCI Kconfig option as a
default across all non-x86 Chrome OS boards.
CQ-DEPEND=CL:367905
BRANCH=None
BUG=None
TEST=See depthcharge CL.
Change-Id: I16ff7f68762a995cd38e5fddaf6971d4b9f07e21
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/368010
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Add the FSP 2.0 header files for Quark. These files were run through
the drivers/intel/fsp2_0/header_util to convert the data types so that
they are compatible with the coreboot build system.
TEST=Build and run on Galileo Gen2.
BUG=None
BRANCH=None
Change-Id: Ic386da82a12feefda555f6722c7e7bf19740877a
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15863
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://chromium-review.googlesource.com/367394
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Initialize the MTRRs for use by bootblock and romstage.
Display the MTRRs.
TEST=Build and run on Galileo Gen2.
BUG=None
BRANCH=None
Change-Id: Iaa51daf2784d5e203c3b937038bad91dcb74a48c
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15861
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://chromium-review.googlesource.com/367392
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Include assert.h to use coreboot's ASSERT macro.
Replace the use of UINT32 data type with uint32_t.
Replace the use of UINT8 data type with uint8_t.
TEST=Build and run on Galileo Gen2
BUG=None
BRANCH=None
Change-Id: I9e727d5180fb8f1e6e5a13696fe2c6f391193c38
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15858
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://chromium-review.googlesource.com/367391
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
This reverts commit d3b45f6b05 ("rockchip: rk3399: enable sdhci clk
for emmc")
BUG=chrome-os-partner:52873
TEST=boot from usb/sdcard and check there is /dev/mmcblk0
BRANCH=none
Change-Id: I8bca870c663d8ce8fac5daaaaf8225489f22ed13
Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
Reviewed-on: https://chromium-review.googlesource.com/367421
Commit-Ready: Brian Norris <briannorris@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Other SOC platforms need to handle the FspNotify calls in the same way
as Apollo Lake. Migrate the FspNotify calls into the FSP 2.0 driver.
Provide a platform callback to handle anything else that needs to be
done after the FspNotify call.
Display the MTRRs before the first call to fsp_notify.
TEST=Build and run on Galileo Gen2
BUG=None
BRANCH=None
Change-Id: I9a8dfd3d7eb3a51f9a1028b3ea4f3eeaa290857f
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15855
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/367379
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Move all FSP error handling into the FSP 2.0 driver. This removes the
need to implement error handling within the SOC code.
TEST=Build and run on Galileo Gen2
BUG=None
BRANCH=None
Change-Id: I6e1a768379944353c25ce2ee69f94d655028a411
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15853
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/367378
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
per hw team's check and info from EDS, this pin needs to be pu 20K.
Otherwise SoC may not notice interrupt request from
EC over LPC because SERIRQ line is floating.
BUG=chrome-os-partner:55586
BRANCH=none
TEST=boot ok and Quanta factory verified the keyboard issue is gone
Change-Id: I33700d2d7e3377b4dd8244f787a383e1622f9a7d
Signed-off-by: Kane Chen <kane.chen@intel.com>
Reviewed-on: https://review.coreboot.org/15951
Tested-by: build bot (Jenkins)
Reviewed-by: Freddy Paul <freddy.paul@intel.com>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/367368
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
IO Standby State (IOSSTATE): The I/O Standby State defines
which state the pad should be parked in when the I/O is in a
standby state. Iosstate set to 15 means IO-Standby is ignored
for this pin (same as functional mode), So that pin keeps on
functioning in S3/S0iX.
BUG=None
BRANCH=None
TEST=None
Change-Id: Ic1e79ea1416440acb913761e7624d59781e0b2c6
Signed-off-by: Venkateswarlu Vinjamuri <venkateswarlu.v.vinjamuri@intel.com>
Signed-off-by: Shankar, Vaibhav <vaibhav.shankar@intel.com>
Reviewed-on: https://review.coreboot.org/15776
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/367366
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Upper CMOS bank is used to store the boot count. It is important to
enable it as soon as possible in bootblock.
BUG=chrome-os-partner:55473
BRANCH=None
TEST=None
Change-Id: Iaa8b8613687c9d99d02c17be61d13c1285113132
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15998
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://chromium-review.googlesource.com/367364
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
BUG=b:28942403
TEST=Boot up and TPM functions normally.
BRANCH=None
3ms delay is sufficient for qup_i2c_write_fifo_flush().
Change-Id: I202f5b8a1ef62bb039c56ba5a25b48b205cf4a67
Signed-off-by: Kan Yan <kyan@google.com>
Reviewed-on: https://chromium-review.googlesource.com/357961
Reviewed-by: Suresh Rajashekara <sureshraj@chromium.org>
Reviewed-by: SARAVANAKUMAR SUDALAI <ssudalai@qti.qualcomm.com>
The Rockchip RK3399 integrates a USB Type-C PHY in charge of things like
SuperSpeed line muxing for rotated cable orientations in the SoC. While
fancy, this is very complicated and we don't want to implement support
for the whole thing in firmware. The USB Type-C standard has
intentionally been designed in a way that the USB 2.0 (HighSpeed) lines
always "just work" in any orientation (by just shorting different pins
in the connector together) so that simple use cases like ours can get
basic USB functionality without much hassle.
However, a semi-configured Type-C PHY can confuse USB 3.0 capable
devices into thinking we're actually supporting SuperSpeed, and fail at
that rather than establishing a reliable HighSpeed connection. This
patch sets enough bits in the Type-C PHY to electrically isolate the
SuperSpeed lines from the connector so that the connected device isn't
going to get any fancy ideas and reliably falls back to USB 2.0.
Also clean up the rest of the USB code while we're at it: avoid writing
a few bits that are already in the right state from their reset values
anyway, or reading values whose content we already know for this SoC.
Rename the USB controllers to the name actually used in the Rockchip
documentation (USB OTGx) rather than the name blindly copied from
Exynos code (USB DRDx).
BRANCH=None
BUG=chrome-os-partner:54621
TEST=Plug a USB 3.0 Patriot Memory stick into both ports in all
orientations, observe how it gets reliably detected now (safe for some
known hardware issues on my board).
Change-Id: Ie80a201a58764c4d851fe4a5098a5acfc4bcebdf
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/366160
Reviewed-by: liangfeng wu <wulf@rock-chips.com>
Reviewed-by: Shelley Chen <shchen@chromium.org>
Reviewed-by: <515506667@qq.com>
Without this patch, eDP output is non-functional pre-graphics driver
regardless of payload (SeaBIOS, Tianocore) or video init method
(VBIOS, GOP driver) and once the standard Windows Intel HD graphics
driver is loaded.
Test: Boot Windows on peppy and auron_paine, install Intel HD
Graphics driver, observe functional eDP output with full video
acceleration.
Debugging method: adjust location of call to run VBIOS within
coreboot, observed that eDP output functional if the VBIOS is run
before the power optimizer lines, broken if run afterwards.
BUG=None
BRANCH=None
TEST=None
Change-Id: I8c7fd6897df771713a6e4440d1256e237c436658
Signed-off-by: Prabal Saha <coolstarorganization@gmail.com>
Reviewed-on: https://review.coreboot.org/15261
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://chromium-review.googlesource.com/366305
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Testing for "devfn < 0" on an unsigned doesn't work, and i2c_bus_to_devfn
returns an int (with -1 for "error"), so use int for devfn.
BUG=None
BRANCH=None
TEST=None
Change-Id: Icec29cdb2afab4a69c04660fef32557c4de4c5d7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1357450, #1357449
Reviewed-on: https://review.coreboot.org/15964
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://chromium-review.googlesource.com/366274
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
This removes the newlines from all files found by the new
int-015-final-newlines script.
BUG=None
BRANCH=None
TEST=None
Change-Id: I89fcb55ff285e4793d7f057f684187359334cb70
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/15975
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://chromium-review.googlesource.com/366218
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Use the ACPI generator for creating the Chrome OS gpio
package. Each mainboard has its own list of Chrome OS
gpios that are fed into a helper to generate the ACPI
external OIPG package. Additionally, the common
chromeos.asl is now conditionally included based on
CONFIG_CHROMEOS.
BUG=None
BRANCH=None
TEST=None
Change-Id: I8152a275190bcc7aa1e0eb33e2d64e37002bacd9
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15909
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/366211
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
1. Enable SoC SD_CMD/D* signals pull-down of 20k when SD-card
is removed. When SD-card is disconnected, the pull-down is
disabled.
2. Provide path for weak leakage from buffers of SD_CMD/D* signal
to be grounded. Thus dropping voltage on the SD_CMD/D* signals to ~0V.
BUG=chrome-os-partner:54421
BRANCH=None
TEST=no power leakage when SDCard isn't inserted on skylake platform
Change-Id: Iec4625f4cc98c1cb92f812dc74072ed3780aee79
Signed-off-by: Zhuo-hao.Lee <zhuo-hao.lee@intel.com>
Reviewed-on: https://review.coreboot.org/15910
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/365324
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Do not pass VBT table to fsp in normal mode and S3 resume so that
PEIM GFX will not get initialized.
BUG=None
BRANCH=None
TEST=None
Change-Id: I78e3241b15d385292f5c22c74f2fc1ad23890531
Signed-off-by: Abhay Kumar <abhay.kumar@intel.com>
Reviewed-on: https://review.coreboot.org/14575
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://chromium-review.googlesource.com/365323
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Add new UPDs for Fspm and Fsps. Update headers to make new UPDs
available for use. New UPDs enable various memory and trace funtionality
options as well as support for zero sized IBB region.
CQ-DEPEND=CL:*270528
BUG=chrome-os-partner:55513
BRANCH=none
TEST=built and tested with no regressions
Change-Id: I6ffd48b3c77248de909c8f00c1c550042cf35141
Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com>
Reviewed-on: https://review.coreboot.org/15815
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://chromium-review.googlesource.com/365320
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
we use wrong register when read obs value and set DQS driver,
even not affect LPDDR3 performance now, but still need to correct it.
BUG=none
BRANCH=none
TEST=boot from kevin
Change-Id: Ie179f9a2955c5712951d40b3ada9c14a51c09c8d
Signed-off-by: Lin Huang <hl@rock-chips.com>
Reviewed-on: https://chromium-review.googlesource.com/363170
Reviewed-by: Julius Werner <jwerner@chromium.org>
In FIFO mode, the I2C driver was not able to fetch
more than 32 bytes of data from the TPM device. Switch to
block mode to be able to read more data.
BUG=chrome-os-partner:51096
TEST=TPM commands succeed
BRANCH=None
Change-Id: I765b76f9d7743f6d387470de594fb6eee99e08ca
Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Reviewed-on: https://chromium-review.googlesource.com/357960
Commit-Ready: Kan Yan <kyan@google.com>
Tested-by: Kan Yan <kyan@google.com>
Reviewed-by: Kan Yan <kyan@google.com>
This patch updates dptf variable in gnvs based on device
configuration by reading the device tree structure.
BUG=chrome-os-partner:53096
BRANCH=None
TEST=Verify that the thermal zones are enumerated
under /sys/class/thermal in Amenia and Reef board.
Navigate to /sys/class/thermal, and verify that a
thermal zone of type TCPU exists there.
Change-Id: I9c9def5ce8250e302b795de3da17789c0d3a4334
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/15620
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/365317
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
This patch adds the common ASL code for Intel
platforms. This is the basic ASL needed to add support
for DPTF controlled devices. We are moving
these commmon ASL files to src/soc/intel/common/acpi as
these are same codes used in all Intel platforms and
hence no need to duplicate.
BUG=chrome-os-partner:53096
BRANCH=None
TEST=Verify that the thermal zones are enumerated
under /sys/class/thermal. Navigate to
/sys/class/thermal, and verify that a thermal
zone of type TCPU exists there.
Change-Id: If2693f55473113016079acd14653ce17b01fd9bb
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/15093
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/365316
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Including the terminating null, 17 characters were being written to the
field, overwriting the a byte of the size field.
Fortunately, the size was updated soon after this.
Fixes coverity warning 1229570 - Destination buffer too small.
BUG=None
BRANCH=None
TEST=None
Change-Id: Iaf9e8ed36d1a689bff4a40593e2bb075d3298353
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/15889
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://chromium-review.googlesource.com/365314
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
This patch adds apollolake soc specific change. DPTF
ASL files are now in src/soc/intel/common so that
they can be reused but different soc can have different values
e.g., for skylake cpu soc thermal reporting device is at
Bus 0, Device 4, Function 0 while for apollolake it is Bus 0, Device 0,
Function 1. This patch adds a dptf asl file in soc directory where we
can define all values which can change across soc's and can be
included in mainboard dptf asl.
BUG=chrome-os-partner:53096
BRANCH=None
TEST=In Amenia and Reef board verify that the thermal zones are
enumerated under /sys/class/thermal in Amenia and Reef board.
Navigate to /sys/class/thermal, and verify that a thermal
zone of type TCPU exists there.
Change-Id: I250bafc6f6113eb74319d64abc7f1d1649baee31
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/15619
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/365227
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Squash of two commits:
List of activity performing in this patch
- early PCH programming
- early SA programming
- early CPU programming
- mainborad early gpio programming for UART and SPI
- car setup
- move chipset programming from verstage to post console
BUG=chrome-os-partner:55357
BRANCH=none
TEST=Built and booted kunimitsu till POST code 0x34
intel/skylake: Fix UART build options
1. skylake does not support UART over I/O. So, NO_UART_ON_SUPERIO needs
to be selected by default.
2. Move BOOTBLOCK_CONSOLE under UART_DEBUG.
3. Include bootblock/uart.c only if UART_DEBUG is selected.
Change-Id: Ie0b473294943aa087997a95c81601ed9584f8cb9
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com>
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/15785
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/16025
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-on: https://chromium-review.googlesource.com/365226
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
EVT1 has two board IDs.
Use binary first mode of base3 encoding for board ID.
BUG=chrome-os-partner:55320
TEST=None.
BRANCH=None
Change-Id: I6e95c7be4a6d28a0aae38b0838bd2ab71d288ba1
Signed-off-by: Kan Yan <kyan@google.com>
Reviewed-on: https://chromium-review.googlesource.com/364623
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Suresh Rajashekara <sureshraj@chromium.org>
Coming Kevin revisions will switch back to an I2C TPM. This patch adds
the required configuration options and code to support that. Since the
TPM type can currently only be changed at compile time, we can no longer
support older Kevins with the same image. In order to build for Kevin
revisions < 5, you have to explicitly override the CONFIG_GRU_HAS_TPM2.
BRANCH=None
BUG=chrome-os-partner:55523
TEST=Compiled both Kevin and Gru, confirmed that bootblock and verstage
binary had the appropriate code differences.
Change-Id: I81a15c9fb037a7ca2d69818e46cbb4f9a5ae1989
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/364222
Reviewed-by: Douglas Anderson <dianders@chromium.org>
