The current implementation is incorrect and is
actually disabling the ports. Fixes that.
BUG=b:37486021, b:35775024
BRANCH=None
TEST=reboot and ensure that we can boot from
SATA SSD.
Change-Id: I908c1ab04b6d5fd823a89bf1a1eae3116920e468
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d44d028050
Original-Change-Id: I8525f6f5ddfdf61c564febd86b1ba2e01c22d9e5
Original-Signed-off-by: Shelley Chen <shchen@chromium.org>
Original-Reviewed-on: https://review.coreboot.org/19553
Original-Reviewed-by: Furquan Shaikh <furquan@google.com>
Original-Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Original-Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://chromium-review.googlesource.com/497404
According to Yang York the FSP is responsible for switching the CPU into
high frequency mode (HFM). For an unknown reason this is not done for the
BSP on my platform though the APs are switched properly.
This code switches the CPU into HFM which makes sure that all cores are in
high frequency mode before payload is started.
It should not harm the operation even if FSP was successful in switching
to HFM.
BUG=none
BRANCH=none
TEST=none
Change-Id: Ia2e05152d0bfa7280d039c66c18eb5e38763c082
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: cf6392f756
Original-Change-Id: I91baf538511747d1692a8b6b359df5c3a8d56848
Original-Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Original-Reviewed-on: https://review.coreboot.org/19537
Original-Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/497397
Remove struct skylake_i2c_config from chip.h since it is not used
anymore.
BUG=none
BRANCH=none
TEST=none
Change-Id: I00e7670f3380e5ab23c5860ebe3fbde501d5bf65
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: bfcc1e37b9
Original-Change-Id: Icde4b7af5b9c31020099c1a6372a6867827f61ae
Original-Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-on: https://review.coreboot.org/19520
Original-Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Original-Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/497396
Board Scarlet doesn't use usbphy1.
BUG=b:37685249
BRANCH=gru
TEST=boot Scarlet, check the firmware log, and confirm
no errors about USB1
Original-Change-Id: I66e0d8a235cc9057964f7abca32bc692d41e88fd
Signed-off-by: Philip Chen <philipchen@google.com>
Reviewed-on: https://review.coreboot.org/19489
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Change-Id: I3b62ea72c1db33fe8eb6386be38989f223d85039
Reviewed-on: https://chromium-review.googlesource.com/494906
Commit-Ready: Philip Chen <philipchen@chromium.org>
Tested-by: Philip Chen <philipchen@chromium.org>
Reviewed-by: Philip Chen <philipchen@chromium.org>
When using Wake On Voice &/or DCI, it requires xtal to be active during
low power idle.
With xtal being active in S0ix state power impact is 1-2 mW.
Hence set xtal bypass bit in CIR31C for low power idle entry.
TEST= Build with s0ix enable for Poppy. Boot to OS & verify that
bit 22 of CIR31C register is set. s0ix works.
Change-Id: Iaffe8defdc559fad908b852903db06725c1bf005
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c261c4b426
Original-Change-Id: Ide2d01536f652cd1b0ac32eede89ec410c5101cf
Original-Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Original-Reviewed-on: https://review.coreboot.org/19442
Original-Tested-by: build bot (Jenkins)
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://chromium-review.googlesource.com/494050
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Create Intel Common FAST_SPI Controller code.
This code contains the code for SPI initialization which has
the following programming -
* Get BIOS Rom Region Size
* Enable SPIBAR
* Disable the BIOS write protect so write commands are allowed
* Enable SPI Prefetching and Caching.
* SPI Controller register offsets in the common header fast_spi.h
* Implement FAST_SPI read, write, erase APIs.
BUG=none
BRANCH=none
TEST=none
Change-Id: Ifd05fa75ddd34ae5df48e4dee0618f30b8d23654
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 89331cd4c8
Original-Change-Id: I046e3b30c8efb172851dd17f49565c9ec4cb38cb
Original-Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Original-Reviewed-on: https://review.coreboot.org/18557
Original-Tested-by: build bot (Jenkins)
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://chromium-review.googlesource.com/493985
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Create Intel Common ITSS code. This code currently only contains
the code for Interrupt initialization required in Bootblock phase.
More code will get added up in the subsequent phases.
BUG=none
BRANCH=none
TEST=none
Change-Id: I235ad1f657752906425ef739c69ec0fc06df7140
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Id: fcab4156c8
Original-Change-Id: I133294188eb5d1312caeafcb621fb650a7fab371
Original-Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Original-Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Original-Reviewed-on: https://review.coreboot.org/19125
Original-Tested-by: build bot (Jenkins)
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/490677
The SRS bit which is supposed to indicate reset button press
is non-functional. If it did work the system reset event it
was associated with is overly specific. Therefore, use the
warm reset status bit.
BUG=b:37687843
Change-Id: I60636f2ec24e4255a718fa3c087a55006411def2
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Id: f39692ee3e
Original-Change-Id: I34dd09c03d2bca72da9a5cdf23121e0d0e621fa6
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://review.coreboot.org/19484
Original-Tested-by: build bot (Jenkins)
Original-Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Original-Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://chromium-review.googlesource.com/490676
It's come to attention that apollolake doesn't support a full retrain
on warm reset. Therefore force a cold reset when a full retrain is
requested in the non-S5 path.
BUG=b:37687843
Change-Id: Icea92953ccdb1c3233d1b5df5620b3f338eb0f46
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Id: 9c86aafe5a
Original-Change-Id: If9a3de1fa8760e7bb2f06eef93a0deb9dbd3f047
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://review.coreboot.org/19483
Original-Tested-by: build bot (Jenkins)
Original-Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Original-Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://chromium-review.googlesource.com/490675
Update default ODT config to have correct CA ODT settings as the
current defaults are incorrect for all the current apollolake designs.
All the current designs pull both A and B channels' LPDDR4 modules' ODT
pins to 1.1V. Therefore, the correct impedance setting needs to be
applied.
In order for the settings to take effect one needs to clear the
memory training cache in deployed systems. Trigger this by bumping
the memory setting version for the SoC.
If needed in the future support for allowing the override of this
setting from the mainboard should be straight forward. It's just not
necessary at this time.
BUG=b:37687843
TEST=BAT test, warm, reboot, S3 cycle test
Change-Id: Ie359847db7391798b2dce5301addecb3d95c88cc
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Id: a3d13fbd69
Original-Change-Id: I9a2f7636b46492a9d08472a0752cdf1f86a72e15
Original-Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com>
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://review.coreboot.org/19397
Original-Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-by: Furquan Shaikh <furquan@google.com>
Original-Tested-by: build bot (Jenkins)
Reviewed-on: https://chromium-review.googlesource.com/490674
Add basic SMM support for Broadwell-DE SoC.
The code is mainly based on the SMM implementation of Broadwell with a
few differences:
- EMRR is now called PRMRR and the UNCORE part of it is not available
- SMM_FEATURE_CONTROL is no longer a MSR but is now located in PCI space
- currently only SERIRQ-SMI has a handler
BUG=none
BRANCH=none
TEST=none
Change-Id: Ic135fe932daed0cb63690d5675786933715c45a5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 97c0979bef
Original-Change-Id: I461a14d411aedefdb0cb54ae43b91103a80a4f6a
Original-Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Original-Reviewed-on: https://review.coreboot.org/19145
Original-Tested-by: build bot (Jenkins)
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/490082
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
On Apollo Lake it was discovered that our current FADT implementation is
valid for ACPI version 3.0 but misses fields for ACPI version 5.0. We
run into booting issues with Windows 10 using version 5 in the FADT
header. In commit 2b8552f49bc3a7d0290f96a84b573669de396011
(intel/apollolake: Switch FADT to ACPI version 3.0) we go back to
version 3 for Apollo Lake. Skylake is now the last platform that uses
version 5 in FADT header.
BUG=none
BRANCH=none
TEST=none
Change-Id: I70041118196641bb6cbf90cd8d16723bdca9be59
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 00d250e228
Original-Change-Id: I2d0367fae5321dee4ccac417b7f99466f8973577
Original-Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Original-Reviewed-on: https://review.coreboot.org/19453
Original-Tested-by: build bot (Jenkins)
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/490081
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
The current implementation of the FADT structure is only ACPI 3.0 compliant.
Setting the version to ACPI 5.0 results in a corrupt FADT. Linux seems
to be able to deal with it but Windows 10 hangs in a really early stage
without any notification to the user.
If ACPI 5.0 is mandatory, the FADT structure needs to be adjusted to
match the specification. Therefore the members sleep_ctl and sleep_stat
needs to be added to FADT structure.
BUG=none
BRANCH=none
TEST=none
Change-Id: I009e765f7aabfc984af95e82c5cb632b81b54532
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 27e6042bb7
Original-Change-Id: I51c7a7a84d10283f5c2a8a2c57257d53bbdee7ed
Original-Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Original-Reviewed-on: https://review.coreboot.org/19146
Original-Tested-by: build bot (Jenkins)
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/490080
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
MMA blobs are SOC specific (not board). So far MMA
is supported by big cores (SKL and KBL).
BUG=none
BRANCH=none
TEST=none
Change-Id: I511652c7f5492f52ff2446bfc214d92ed79c1e7c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ebb7994263
Original-Change-Id: I922789a2a12d55360624dd6de15ab9f0bb5f0acf
Original-Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Reviewed-on: https://review.coreboot.org/19260
Original-Tested-by: build bot (Jenkins)
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/488281
These files are actually indentical, but unfortunately, the formatting
was changed without caring for the already present files. Fix that. Use
the license formatting where less lines are used.
The next step is to put that in a common location.
BUG=none
BRANCH=none
TEST=none
Change-Id: I7b8ec432871845f5ae16f43508f8e922ada35e16
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d06c51895e
Original-Change-Id: Iecb263b9d321a33e64988b315220893df2e0045c
Original-Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Original-Reviewed-on: https://review.coreboot.org/19423
Original-Tested-by: build bot (Jenkins)
Original-Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/488053
Utilize the postcar stage for tearing down CAR and initializing
the MTRRs once ram is up. This flow is consistent with apollolake
and allows CAR_GLOBAL variables to be directly accessed and no
need for migrating CAR_GLOBAL variables as romstage doesn't
run with and without CAR being available.
BUG=none
BRANCH=none
TEST=none
Change-Id: I78458fefac96d714eeacc3832a2c4818d2fcd016
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 79f0741f81
Original-Change-Id: I76de447710ae1d405886eb9420dc4064aa26eccc
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://review.coreboot.org/19335
Original-Tested-by: build bot (Jenkins)
Original-Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://chromium-review.googlesource.com/488049
The devicetree data structures have been available in more than just
ramstage and romstage. In order to provide clearer and consistent
semantics two new macros are provided:
1. DEVTREE_EARLY which is true when !ENV_RAMSTAGE
2. DEVTREE_CONST as a replacment for ROMSTAGE_CONST
The ROMSTAGE_CONST attribute is used in the source code to mark
the devicetree data structures as const in early stages even though
it's not just romstage. Therefore, rename the attribute to
DEVTREE_CONST as that's the actual usage. The only place where the
usage was not devicetree related is console_loglevel, but the same
name was used for consistency. Any stage that is not ramstage has
the const C attribute applied when DEVTREE_CONST is used.
BUG=none
BRANCH=none
TEST=none
Change-Id: If0409e8e9d6a203254a9f9b749de5cab70dfc842
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e4d7abc0d4
Original-Change-Id: Ibd51c2628dc8f68e0896974f7e4e7c8588d333ed
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://review.coreboot.org/19333
Original-Tested-by: build bot (Jenkins)
Original-Reviewed-by: Philippe Mathieu-Daud <philippe.mathieu.daude@gmail.com>
Original-Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://chromium-review.googlesource.com/488047
The MT817x display output pipeline can be configured to drive an 8-lane
MIPI/DSI panel using "dual DSI" mode. For the "dual DSI" video data path,
the UFO block is configured to reorder the data stream into left and right
halves which are then sent by the SPLIT1 block to the DSI0 and DSI1
respectively. The DSI0 and DSI1 outputs are then synchronously clocked at
half the nominal data rate by their respective MIPI_TX0/MIPI_TX1 phys.
Also, update the call sites in oak mainboard to avoid build breakage.
BRANCH=none
BUG=b:35774871
TEST=Boot Rowan in developer mode and see output on the panel
Change-Id: Id47dfd7d9e98689b54398fc8d9142336b41dc29f
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-on: https://review.coreboot.org/19361
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/439027
This patch enables TPM2 using cr50 over I2C for the Rowan board, and
adds an mt8173 specific TPM IRQ polling function. The function relies on
the appropriate EINT input configured to trigger the ready status on
the rising edge.
The cr50 TPM is on I2C address 0x50.
The cr50 interrupt GPIO is also made available for use by depthcharge
via the coreboot tables.
BRANCH=none
BUG=b:36786804
TEST=Boot rowan w/ serial enabled, verify coreboot and depthcharge are
configured to use IRQ flow control when talking to the Cr50 TPM.
Change-Id: If6cdd0e39e4ac86538f27f322c55c329179ee084
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-on: https://review.coreboot.org/19364
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/442306
Add basic support to configure GPIOs to poll for external interrupts
(EINT).
BRANCH=none
BUG=b:36786804
TEST=Boot rowan w/ serial enabled, verify coreboot and depthcharge are
configured to use IRQ flow control when talking to the Cr50 TPM.
Change-Id: I9d52591661a5a74ec1fd9a081f606f0a08a3a6ab
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-on: https://review.coreboot.org/19362
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-on: https://chromium-review.googlesource.com/479497
On Intel platforms utilizing the CR50 TPM the interrupts are routed
to GPIOs connected to the GPE blocks. Therefore, provide a common
implementation for tis_plat_irq_status() to reduce code duplication.
This code could be further extended to not be added based on
MAINBOARD_HAS_TPM_CR50, but that's all that's using it for now.
Change-Id: I955df0a536408b2ccd07146893337c53799e243f
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/19369
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-on: https://chromium-review.googlesource.com/482742
Commit-Ready: Daniel Kurtz <djkurtz@chromium.org>
Tested-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Move include of reg_access.h from pci_devs.h to reg_access.c.
TEST=Build and run on Galileo Gen2
Change-Id: I0bd92d9594315278449ea9241c951a58e4ff44d9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e0a60383b2
Original-Change-Id: I0d2de96f51c56001cdd06c7974cbc649fde1e89c
Original-Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Original-Reviewed-on: https://review.coreboot.org/19355
Original-Tested-by: build bot (Jenkins)
Original-Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/482973
Add ASL entries for IMGU and CIO2 devices
* _CCA ACPI object to report that there is no Cache Coherent DMA support.
* CAMD ACPI object to specify the device type.
These ACPI objects are used by Intel kernel drivers.
BUG=b:36580624
BRANCH=none
TEST=Build and boot poppy. Dump and verify that DSDT table
has the entries for IMGU and CIO2 devices.
Change-Id: Ib0440f6c71aad1bb63dfa89fb10f32d8a2e35d80
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 929f5e955e
Original-Change-Id: I13050253e18408cdb1e196f8003b3f43299aa5a5
Original-Signed-off-by: Sowmya V <v.sowmya@intel.com>
Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Original-Reviewed-on: https://review.coreboot.org/18968
Original-Tested-by: build bot (Jenkins)
Original-Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Original-Reviewed-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://chromium-review.googlesource.com/482959
Currently when enabling Deep S3 or Deep S5 it unconditionally gets enabled
in both DC and AC states. However since using Deep S3 disables some
expected features like wake-on-USB it is not always desired to enable the
same state in both modes.
To address this split the setting and add a separate config for Deep Sx in
AC and DC states.
All motherboards that set this config were updated, but there is no actual
change in behavior in this commit.
BUG=b:36723679
BRANCH=none
TEST=This commit has no runtime visible changes, I verified on Eve that the
Deep SX config registers are unchanged, and it compiles for all affected boards.
Change-Id: Ifceb6039323c6a755ea4a0c26356aa778e2d04d1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1fe32d6bb2
Original-Change-Id: I590f145847785b5a7687f235304e988888fcea8a
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://review.coreboot.org/19239
Original-Tested-by: build bot (Jenkins)
Original-Reviewed-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://chromium-review.googlesource.com/480096
With recent change to use common block PCR (ccd8700c),
IOSF_BASE_ADDRESS was renamed to PCR_BASE_ADDRESS. However, SD card
change (99ce8a9b) was not rebased on top of it, so IOSF_BASE_ADDRESS
slipped into the tree. Fix this by replacing all occurrences of
IOSF_BASE_ADDRESS by PCR_BASE_ADDRESS.
CQ-DEPEND=CL:477153
BUG=None
BRANCH=reef
TEST=Compiles successfully for reef.
Change-Id: I40eb07be306035c940fc960896e0807d6c73bafa
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/19277
Tested-by: build bot (Jenkins)
Reviewed-by: Venkateswarlu V Vinjamuri <venkateswarlu.v.vinjamuri@intel.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://chromium-review.googlesource.com/477410
Reviewed-by: Martin Roth <martinroth@chromium.org>
Currently sdcard CD host ownership is always owned by the GPIO driver.
Due to this sdcard detection fails during initial boot process and OS
fails to boot from sdcard.
This implements change in host ownership from acpi to GPIO driver when
kernel starts booting.
CQ-DEPEND=CL:477410
BUG=b:35648535
BRANCH=reef
TEST=Check OS boot from sdcard.
Change-Id: I042a8762dc1f9cb73e6a24c1e7169c9746b2ee14
Signed-off-by: Venkateswarlu Vinjamuri <venkateswarlu.v.vinjamuri@intel.com>
Reviewed-on: https://review.coreboot.org/18947
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Vaibhav Shankar <vaibhav.shankar@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/477153
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Create Intel Common RTC code. This code currently only
contains the code for configuring RTC required in Bootblock phase
which has the following programming -
* Enable upper 128 bytes of CMOS.
BUG=none
BRANCH=none
TEST=none
Change-Id: I25d743418a00626e5fb199ce26c095acbf01902d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8e84723e02
Original-Change-Id: Id9dfcdbc300c25f43936d1efb5d6f9d81d3c8453
Original-Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Original-Reviewed-on: https://review.coreboot.org/18558
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Philippe Mathieu-Daud <philippe.mathieu.daude@gmail.com>
Original-Tested-by: build bot (Jenkins)
Reviewed-on: https://chromium-review.googlesource.com/474131
IOSF_SB message space is used to access registers mapped
on IOSF-SB. These registers include uncore CRs (configuration
registers) and chipset specific registers. The Private
Configuration Register (PCR) space is accessed on IOSF-SB
using destination ID also known as Port ID.
Access to IOSF-SB by the Host or System Agent is possible
over PSF via the Primary to Sideband Bridge (P2SB). P2SB will
forward properly formatted register access requests as CRRd and
CRWr request via IOSF-SB.
BUG=none
BRANCH=none
TEST=none
Change-Id: Id92e85334956d993168005f7737b623da039cbbb
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d579199f96
Original-Change-Id: I78526a86b6d10f226570c08050327557e0bb2c78
Original-Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Original-Reviewed-on: https://review.coreboot.org/18669
Original-Tested-by: build bot (Jenkins)
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/474128
There is only one user for spi_get_config i.e. SPI ACPI. Also, the
values provided by spi_get_config are constant for now. Thus, get rid
of the spi_get_config call and fill in these constant values in SPI
ACPI code itself. If there is a need in the future to change these,
appropriate device-tree configs can be added.
BUG=b:36873582
Change-Id: Id2a1447d3112dc0f33f35b1357a039f1852da44d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5bda642bcb
Original-Change-Id: Ied38e2670784ee3317bb12e542666c224bd9e819
Original-Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-on: https://review.coreboot.org/19203
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: build bot (Jenkins)
Reviewed-on: https://chromium-review.googlesource.com/472721
Enable SS link trunk clock gating & D3hot when device enters
D3 state.
Similarly disable SS link trunk clock gating & D3hot when device enters
D0 state
TEST=Build & boot Poppy board. Check working for XHCI wake when DUT
is in S3.
Change-Id: I1fee9776173a5e15436da3839868584187cddc51
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: fb7937918a
Original-Change-Id: Ida2afa2e5f9404c0c15d7027480a28a003ad9a40
Original-Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Original-Reviewed-on: https://review.coreboot.org/18879
Original-Tested-by: build bot (Jenkins)
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/472714
Sky Lake PCH contains two GSPI controllers. Using the common GSPI
controller driver implementation for Intel PCH, add support for GSPI
controller buses on Sky Lake/Kaby Lake.
BUG=b:35583330
Change-Id: If9512ea624db0c5e867cf98a5cd8857f7d3ae1db
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 05a6f29d32
Original-Change-Id: I29b1d4d5a6ee4093f2596065ac375c06f17d33ac
Original-Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-on: https://review.coreboot.org/19099
Original-Tested-by: build bot (Jenkins)
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/471460
