Tom Warren 29591a97fb ryu: Add pad/funit init for i2c6 (audio codec, etc.) ... BUG=none BRANCH=none TEST=built ryu, booted to recovery mode OK Ran TegraShell and could r/w I2C6 regs OK Change-Id: Ic74e3518ab69ec7b1bc3bc4f637b7b38b85734c9 Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-on: https://chromium-review.googlesource.com/212926 Reviewed-by: Aaron Durbin <adurbin@chromium.org>		2014-08-19 02:59:22 +00:00
..
arch	arm64: handle non-cacheable normal memory	2014-08-13 05:24:11 +00:00
console	vboot2: implement select_firmware for pre-romstage verification	2014-06-30 18:45:09 +00:00
cpu	haswell: Update microcode revision	2014-07-29 04:37:18 +00:00
device	i2c: Add software_i2c driver for I2C debugging and emulation	2014-05-19 20:34:31 +00:00
drivers	spi: Support Macronix MX25U6435F SPI ROM.	2014-08-07 22:45:49 +00:00
ec	chromeec: provide proto v3 over i2c support	2014-08-07 22:38:07 +00:00
include	smbios: add funtion for smbios type17	2014-08-12 02:40:38 +00:00
lib	fix how to interpret board id read from gpios	2014-08-09 07:05:56 +00:00
mainboard	ryu: Add pad/funit init for i2c6 (audio codec, etc.)	2014-08-19 02:59:22 +00:00
northbridge	coreboot: Rename coreboot_ram stage to ramstage	2014-05-07 23:30:23 +00:00
soc	tegra132: Add special I2C6 init	2014-08-19 02:56:20 +00:00
southbridge	coreboot: Rename coreboot_ram stage to ramstage	2014-05-07 23:30:23 +00:00
superio	pnp: Allow setting of misc register 0xf4 in device tree	2013-12-20 00:37:38 +00:00
vendorcode	vboot: fix vboot_load_ramstage()	2014-08-05 02:39:09 +00:00
Kconfig	Enable publishing of board ID where supported	2014-07-30 23:41:23 +00:00