This patch adds a mainboard SMI handler file which has
functions to set proper Wake mask before going to sleep
so that system can wake up on lidopen, key press etc.
Also SCI mask is set on boot which will enable timely update
of battery UI on charger connect/disconnect.
BUG = chrome-os-partner:53992
TEST = Reef Platform wakes from S3 on lidopen, key press and also
sysfs entry for AC is updated on charger connect/disconnect.
Change-Id: I8c087994b48223b253dcf1cbb3ed3c3a0f366e36
Original-Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Original-Reviewed-on: https://review.coreboot.org/15615
Original-Tested-by: build bot (Jenkins)
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/360806
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
This patch adds the support for gpio_tier1_sci_en bit which
needs to be set before going to sleep so that when
gpio_tier1_sci_sts bit gets set platform can wake
from S3.
BUG = chrome-os-partner:53992
TEST = Platform wakes from S3 on lidopen,key press.
Tested on Amenia and Reef boards.
Change-Id: I3ba79fa53ca8817149d585fa795a8f427c128dcb
Original-Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Original-Reviewed-on: https://review.coreboot.org/15612
Original-Tested-by: build bot (Jenkins)
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/360801
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
FSP is currently setting a hard-coded policy for the interrupt
polarity settings. When the mainboard has already set the GPIO
settings up prior to SiliconInit being called that results
in the previous settings being dropped. Work around FSP's
default policy until FSP is fixed.
BUG=chrome-os-partner:54955
Change-Id: Ibbd8c4894d8fbce479aeb73aa775b67df15dae85
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://review.coreboot.org/15649
Original-Tested-by: build bot (Jenkins)
Original-Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Original-Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Original-Reviewed-by: Furquan Shaikh <furquan@google.com>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/360800
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
For APIC routed gpios, set the corresponding interrupt polarity
for the associated IRQ based on the gpio pad's invert setting.
This allows for the APIC redirection entries to match the hardware
active polarity once the double inversion takes place to meet
apollolake interrupt triggering constraints.
BUG=chrome-os-partner:54955
Change-Id: I69c395b6f861946d4774a4206cf8f5f721c6f5f4
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://review.coreboot.org/15648
Original-Tested-by: build bot (Jenkins)
Original-Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Original-Reviewed-by: Furquan Shaikh <furquan@google.com>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/360729
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
The interrupt and timer subsystem (ITSS) sits between the APIC
and the other logic blocks. It only supports positive polarity
events, but there's a polarity inversion setting for each IRQ such
that it can pass the signal on to the APIC according to the
expected APIC redirection entry values. This support is needed
in order for the platform/board to set the expected interrupt
polarity into the APIC for gpio signals.
BUG=chrome-os-partner:54955
Change-Id: I50ea1b7c4a7601e760878af515518cc0e808c0d1
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://review.coreboot.org/15647
Original-Tested-by: build bot (Jenkins)
Original-Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Original-Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Original-Reviewed-by: Furquan Shaikh <furquan@google.com>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/360728
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Utilize the new interrupt macros in order to specify correct
polarity of the gpio interupts. Some of the interrupts were
working by catching the opposite edge of the asserted interrupt.
BUG=chrome-os-partner:54977
Change-Id: I55bee2c4363cfdbf340a4d5b3574b34152e0069c
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://review.coreboot.org/15646
Original-Tested-by: build bot (Jenkins)
Original-Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Original-Reviewed-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/360727
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Utilize the new interrupt macros in order to specify correct
polarity of the gpio interupts. Some of the interrupts were
working by catching the opposite edge of the asserted interrupt.
BUG=chrome-os-partner:54977
BUG=None
BRANCH=None
TEST=None
Change-Id: Iee33c0a949be0a11147afad8a10a0caf6590ff7b
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://review.coreboot.org/15645
Original-Tested-by: build bot (Jenkins)
Original-Reviewed-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/360726
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Internally, apollolake routes its interrupts as active high.
This includes SCI, SMI, and ACPI. Therefore, provide helper
macros such that the user can describe an interrupt's active
high/low polarity more easily. It helps for readability when
one is comparing gpio configuration next to APIC configuration
in different files. Additionally, the gpio APIC macros always
use a LEVEL trigger in order to let the APIC handle the
filtering of the IRQ on its own end.
BUG=chrome-os-partner:54977
BUG=None
BRANCH=None
TEST=None
Change-Id: Id8fdcd98f0920936cd2b1a687fd8fa07bce9a614
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://review.coreboot.org/15644
Original-Tested-by: build bot (Jenkins)
Original-Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Original-Reviewed-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/360725
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
FSP1_0 places romstage ram stack at fixed location of
RAMTOP in low memory before returning to coreboot proper.
There is no possibility of making a complete backup of
RAMBASE..RAMTOP region and currently such backup is not
even attempted.
As a conclusion, S3 resume would always cause OS memory
corruption.
BUG=None
BRANCH=None
TEST=None
Change-Id: I5b9dd4069082e022b01b0d6a9ad5dec28a06e8b0
Original-Signed-off-by: Kysti Mlkki <kyosti.malkki@gmail.com>
Original-Reviewed-on: https://review.coreboot.org/15576
Original-Tested-by: build bot (Jenkins)
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/360723
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
In order to save power in S3, we remove reset gpio setting in kernel.
We still need to initialize touchscreen ic.
Do it by pulling low reset gpio for 500us and then pulling high
in firmware.
BRANCH=none
BUG=chrome-os-partner:55170
TEST=build on elm.
Change-Id: If2ac815c4fd5c5ae15443348a49eb31449b724b1
Signed-off-by: YH Huang <yh.huang@mediatek.com>
Reviewed-on: https://chromium-review.googlesource.com/360312
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Yidi Lin <yidi.lin@mediatek.com>
Reviewed-by: Johnny Chuang <johnny.chuang@emc.com.tw>
Asserting this GPIO will send a signal to the EC to trigger a reset
for the AP and the CR50.
BRANCH=none
BUG=chrome-os-partner:55252
TEST=the device now reboots when it needs to switch between different
boot modes instead of hanging with "failed to reboot" message.
Change-Id: Idfd20977cf3682bd8933f89e8eec53005e55864e
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/360238
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
For some reason the self loader wasn't clearing segments
marked as BSS type. Other segments which weren't fully
written by the file-backed content were being cleared up
to the indicated memsize. Treat segments marked BSS
similarly by clearing their content.
Change-Id: I9296c11a89455a02e5dd18bba13d4911517c04f6
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15603
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://chromium-review.googlesource.com/360210
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
There were two successive calls to prog_set_area() which
duplicated the same logic. Remove the unnecessary redundancy.
Change-Id: I594577f8e7e78d403e7a5656f78e784e98c2c859
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15602
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://chromium-review.googlesource.com/360209
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
The list insertion operations were open coded at each location.
Add helper functions which provide the semantics needed by
the selfboot code in a single place.
Change-Id: Ic757255e01934b499def839131c257bde9d0cc93
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15601
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://chromium-review.googlesource.com/360208
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
The HTIF is deprecated and the newest RISC-V binutils don't know the
mtohost/mfromhost CSRs anymore.
The SBI implementation still needs to be restructured.
Change-Id: I13f01e45b714f1bd919e27b84aff8db772504b1f
Signed-off-by: Jonathan Neuschfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/15289
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-on: https://chromium-review.googlesource.com/360206
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This patch sets the devicetree for gpe0_dw configuration
and also configures the GPIO lines for SCI. EC_SCI_GPI
is configured to proper value.
BUG = chrome-os-partner:53438
TEST = Toggle pch_sci_l from ec console using gpioset command
and see that the sci counter increases in /sys/firmware/acpi/interrupt
and also 9 in /proc/interrupt
Change-Id: If258bece12768edb1e612c982514ce95c756c438
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/15556
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/360205
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
This patch sets the devicetree for gpe0_dw configuration
and also configures the GPIO lines for SCI. EC_SCI_GPI
is configured to proper value.
BUG = chrome-os-partner:53438
TEST = Toggle pch_sci_l from ec console using gpioset command
and see that the sci counter increases in /sys/firmware/acpi/interrupt
and also 9 in /proc/interrupt
Change-Id: I3ae9ef7c6a3c8688bcb6cb4c73f5618e7cde342c
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/15325
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/360204
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
This patch adds the handler to enable bit for gpio_tier1_sci_en.
gpio_tier1_sci_en enables the setting of the GPIO_TIER1_SCI_STS
bit to generate a wake event and/or an SCI or SMI#. We are setting
the bit for gpio_tier1_sci_en from the ASL code as OS clears this bit
if set from BIOS. As per ACPI spec _GPE is defined as the Named
Object that evaluates to either an integer or a package. If _GPE
evaluates to an integer, the value is the bit assignment of the SCI
interrupt within the GPEx_STS register of a GPE block described in
the FADT that the embedded controller will trigger. FADT right now
has no mechanism to acheive the same.
Change-Id: I1e1bd3f5c89a5e6bea2d1858569a9d30e6da78fe
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/15578
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/360203
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
As reported by Andrew Engelbrecht on the coreboot mailing list, there
was an issue when selecting the pxe rom file:
When using "make menuconfig", if "add pxe rom" is selected, then
the field below to set to the path of the pxe rom, the "add pxe rom"
option gets disabled.
This problem seems to be due to the use of the 'optional' Kconfig
keyword, so this section of the Kconfig is rewitten here to remove that
keyword and fix the issue.
Change-Id: I51680cb746160cb853c8679ac64e2d37989cb574
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/15555
Tested-by: build bot (Jenkins)
Reviewed-by: Jonathan Neuschfer <j.neuschaefer@gmx.net>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://chromium-review.googlesource.com/360202
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
olddefconfig is used to expand the miniconfig files with all the default
values removed by the 'savedefconfig' target.
Change-Id: Ic9c62f4c334919e8be478d30099819b90891670a
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/15319
Tested-by: build bot (Jenkins)
Reviewed-by: Jonathan Neuschfer <j.neuschaefer@gmx.net>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://chromium-review.googlesource.com/360201
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Properly obtain the top of memory address from the hardware registers
set by FSP.
TEST=Build and run on Galileo Gen2
Change-Id: I7681d32112408b8358b4dad67f8d69581c7dde2e
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15594
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://chromium-review.googlesource.com/360200
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
rk3399 sdram size is 192K, there still some space do not use now,
we need more romstage space to include sdram config, so extend
romstage range.
BRANCH=none
BUG=chrome-os-partner:54871
TEST=run "stressapptest -M 1024 -s 1000" on kevin board and pass
Change-Id: Ib5aa1e1b942cde8d9476773f5a84ac70bb830c80
Signed-off-by: Lin Huang <hl@rock-chips.com>
Reviewed-on: https://chromium-review.googlesource.com/359092
Reviewed-by: Julius Werner <jwerner@chromium.org>
kevin rev3 pwm regulator ripple still not great, especially for
center logic, for supporting sdram 800MHz stable, raise up it to
0.95v.
BRANCH=none
BUG=chrome-os-partner:54871
TEST=run "stressapptest -M 1024 -s 1000" on kevin board and pass
Change-Id: Ideec9c3ab2f919af732719ed2f6a702068d99c8f
Signed-off-by: Lin Huang <hl@rock-chips.com>
Reviewed-on: https://chromium-review.googlesource.com/359130
Commit-Ready: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
It is not possible for cbmem_add() to complete succesfully before
cbmem_recovery() is called. Adding more tables on S3 resume path
is also not possible.
Change-Id: Ic14857eeef2932562acee4a36f59c22ff4ca1a84
Signed-off-by: Kysti Mlkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15472
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/359541
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Previously, any 800MHz DIMMs were being slowed to 667MHz
for no reason other than there was a bug in the maximum
frequency detection code for the MCH.
Change-Id: Id6c6c88c4a40631f6caf52f536a939a43cb3faf1
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/15257
Tested-by: build bot (Jenkins)
Reviewed-by: Kysti Mlkki <kyosti.malkki@gmail.com>
Reviewed-on: https://chromium-review.googlesource.com/359540
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Bitmap images will be moved to CBFS from GBB. This patch adjust the flash
map accordingly for rambi, samus, peppy, parrot, falco, panther, auron,
strago.
BUG=chromium:622501
BRANCH=tot
TEST=emerge-{samus,falco} chromeos-bootimage
CQ-DEPEND=CL:354710,CL:355100
Change-Id: I0b82285186540aa27757e312e7bd02957f9962ec
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/355040
This removes an empty function for sdram training. If it's needed
later, we can always add it back.
BRANCH=none
BUG=none
TEST=build and boot firmware for kevin/gru
Change-Id: I6bf77d2f81719c68cd78722c3fe9ae547ea1e79c
Signed-off-by: Derek Basehore <dbasehore@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/354164
Reviewed-by: Martin Roth <martinroth@chromium.org>
This changes the src arg for copy_to_reg to a const u32 * instead of a
u32 * in sdram.c.
BRANCH=none
BUG=none
TEST=emerge-gru coreboot
Change-Id: I362727f1dbe6726bf3240f9219c394786162a1a0
Signed-off-by: Derek Basehore <dbasehore@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/354163
Reviewed-by: Martin Roth <martinroth@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
This simplifies some of the code with better variable declaractions
which removes a lot of line continuations. Instead of declaring a
pointer to the container of the needed struct or array, this retrieves
a pointer to the struct or array instead.
BRANCH=none
BUG=none
TEST=check that gru and kevin still build and boot properly followed
by running "stressapptest -M 1024 -s 1000" and making sure it passes
Change-Id: If4e386d4029f17d811fa3ce83e5be89e661a7b11
Signed-off-by: Derek Basehore <dbasehore@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/354162
Reviewed-by: Martin Roth <martinroth@chromium.org>
Reviewed-by: Stefan Reinauer <reinauer@google.com>
This removes a variable that was only used once and makes variable
declarations consistent by moving those only used in one block of code
into that block.
BRANCH=none
BUG=none
TEST=on kevin/gru, run "stressapptest -M 1024 -s 3600"
Change-Id: Id0ff0c45189c292ab40e1c4aa27929fb7780e864
Signed-off-by: Derek Basehore <dbasehore@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/355667
Reviewed-by: Martin Roth <martinroth@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
This adds two local variables for dramtype and ddr_freq to sdram_init
since those two values are commonly used in the function. It also
removes a variable that is just used once and directly uses the value
for a function call instead.
BRANCH=none
BUG=none
TEST=on kevin/gru, run "stressapptest -M 1024 -s 3600" and check that
it passes
Change-Id: I4e1a1a4a8848d0eab07475a336c24bda90b2c9f8
Signed-off-by: Derek Basehore <dbasehore@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/355666
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Specify the memory initialization parameters in
mainboard/intel/galileo/devicetree.cb. Pass these values into FSP to
initialize memory.
TEST=Build and run on Galileo Gen2
BUG=None
BRANCH=None
TEST=None
Change-Id: I83ee196f5fb825118a3a74b61f73f3728a1a1dc6
Original-Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Original-Reviewed-on: https://review.coreboot.org/15260
Original-Tested-by: build bot (Jenkins)
Original-Reviewed-by: Martin Roth <martinroth@google.com>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/359317
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Switch the I2C scripts to properly match the I2C address selection for
the Galileo Gen1 board.
TEST=Build an run on Galileo Gen1
BUG=None
BRANCH=None
TEST=None
Change-Id: I9fc8b59a3a719abb474c99a83e0d538794626da9
Original-Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Original-Reviewed-on: https://review.coreboot.org/15258
Original-Tested-by: build bot (Jenkins)
Original-Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Original-Reviewed-by: Martin Roth <martinroth@google.com>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/359316
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Add table containing feature documentation:
* Feature name with link to specification or documentation
* Linux utility name with link to utility documentation
* EDK-II utility name with link to utility documentation
BUG=None
BRANCH=None
TEST=None
Change-Id: Ie33d8563320697c12b34974286bffcadf92c016e
Original-Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Original-Reviewed-on: https://review.coreboot.org/15256
Original-Tested-by: build bot (Jenkins)
Original-Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Original-Reviewed-by: Martin Roth <martinroth@google.com>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/359315
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Add the initial index.html file. The web server is currently not
converting .md files into html. Instead they are being downloaded in
their raw .md file format. Use the index.html file to enable the
web server to find and process the file.
TEST=None
BUG=None
BRANCH=None
TEST=None
Change-Id: I27334ccacdb34b56946a9061132acf2808d32175
Original-Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Original-Reviewed-on: https://review.coreboot.org/15218
Original-Tested-by: build bot (Jenkins)
Original-Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Original-Reviewed-by: Martin Roth <martinroth@google.com>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/359314
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Remove the unused Kconfig values which specify the PDAT file, its
location and inclusion into the coreboot file system. Remove the code
in romstage which locates the pdat.bin file.
TEST=Build and run on Galileo Gen2
BUG=None
BRANCH=None
TEST=None
Change-Id: I397aa22ada6c073c60485a735d6e2cb42bfd40ab
Original-Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Original-Reviewed-on: https://review.coreboot.org/15205
Original-Tested-by: build bot (Jenkins)
Original-Reviewed-by: Martin Roth <martinroth@google.com>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/359313
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Use the device driver for DA7219 device configuration in the SSDT and
remove the static copy in the DSDT.
Tested on reef to ensure that the generated SSDT contents are
equivalent to the current DSDT contents.
BUG=None
BRANCH=None
TEST=None
Change-Id: I288eb05d0cb3f5310c4dca4aa1eab5a029f216af
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://review.coreboot.org/15539
Original-Tested-by: build bot (Jenkins)
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/359311
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Add a device driver to generate the device and required properties
into the SSDT.
This driver uses the ACPI Device Property interface to generate the
required parameters into the _DSD table format expected by the kernel.
This was tested on the reef mainboard to ensure that the SSDT contained
the equivalent parameters that are provided by the current DSDT object.
BUG=None
BRANCH=None
TEST=None
Change-Id: Ia809e953932a7e127352a7ef193974d95e511565
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://review.coreboot.org/15538
Original-Tested-by: build bot (Jenkins)
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/359310
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
