The lpss_i2c driver is enabled in romstage, so the SOC needs to
export the pre-ram compatible I2C controller info, which for
skylake is in the bootblock/i2c.c file.
This was not causing a compiler error in normal use, but when
adding I2C debug code in romstage it failed to compile.
With this added, I can now do I2C transactions in romstage.
BUG=none
BRANCH=none
TEST=none
Change-Id: Ieb17a32000c65a5f1577d3897ddaa869ef63ee32
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Commit-Id: 4234ca2764
Original-Change-Id: I0778b0497d0b6936df47c29b2ce942c8d90cf39b
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://review.coreboot.org/18198
Original-Tested-by: build bot (Jenkins)
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/431208
Commit-Ready: Duncan Laurie <dlaurie@google.com>
Tested-by: Duncan Laurie <dlaurie@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
As per Audio PCH team recommendation the iDisplay Audio/SDIN2
should be disabled to bypass InitializeDisplayAudio() function
call. Display Audio Codec is HDA-Link Codec, which is not
supported in I2S mode
BUG=chrome-os-partner:61548
BRANCH=none
TEST=Tested to verify that InitializeDisplayAudio() does not
get called.
Change-Id: I5900291ca4b2929db3e09277ffc3dce24d8de6fb
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 32997fb0bc
Original-Change-Id: Ie0771a8653821e737d10e876313917b4b7c64499
Original-Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Original-Reviewed-on: https://review.coreboot.org/18091
Original-Tested-by: build bot (Jenkins)
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/430611
Commit-Ready: Aaron Durbin <adurbin@chromium.org>
Tested-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
arm-trusted-firmware comes with another firmware for a coprocessor that
isn't AArch64. When building ATF, make sure to pass our arm(32) compiler
for that purpose.
BUG=none
BRANCH=none
TEST=none
Change-Id: I0fb841a8d434389bc665fd6c133465dfcbba1fde
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f34ca46fa6
Original-Change-Id: I49695f3287a742cd1fb603b890d124f60788f88f
Original-Signed-off-by: Martin Roth <martinroth@google.com>
Original-Reviewed-on: https://review.coreboot.org/18024
Original-Tested-by: build bot (Jenkins)
Original-Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://chromium-review.googlesource.com/430717
Commit-Ready: Aaron Durbin <adurbin@chromium.org>
Tested-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Currently car_stage_entry is defined only in romstage_after_verstage and
as a result when SEPARATE_VERSTAGE is not selected, there is no
entry point into romstage and romstage will not be started at all.
The solution is move out romstage_after_verstage.S from fsp1.1 driver
to skylake/romstage. And add CONFIG_PLATFORM_USES_FSP1_1 to fix the
build and boot issue with this change.
Besides that, rename the romstage_after_verstage to romstage_c_entry
in more appropriate naming convention after this fix.
Tested on SkyLake Saddle Brook (FSP 1.1) and KabyLake Rvp11 (FSP 2.0),
romstage can be started successfully.
BUG=none
BRANCH=none
TEST=none
Change-Id: I95a45a090b4a335fa8655c89fbede13d011bb321
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d8e34b2c44
Original-Change-Id: I1cd2cf5655fdff6e23b7b76c3974e7dfd3835efd
Original-Signed-off-by: Teo Boon Tiong <boon.tiong.teo@intel.com>
Original-Reviewed-on: https://review.coreboot.org/17976
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: build bot (Jenkins)
Reviewed-on: https://chromium-review.googlesource.com/430735
it may cause edp aux transfer error if set the edp pclk clock too high,
so reduce it to 25MHz.
BUG=chrome-os-partner:60130
BRANCH=None
TEST=Build and Boot
Change-Id: Ibb86c12c1d7c00dc3b4cc7a6bdf3bd6e895cd9f3
Signed-off-by: Lin Huang <hl@rock-chips.com>
Reviewed-on: https://chromium-review.googlesource.com/429410
Commit-Ready: Julius Werner <jwerner@chromium.org>
Tested-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
This code allows people to override the usb2 eye pattern
UPD settings for boards.
BUG=chrome-os-partner:61031
BRANCH=None
TEST=Usb2 function ok and make sure fsp upd is overridden
Change-Id: I9e4cc098e5e51f178ab00f7b4d56c4ba099a279c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9d490daf8d
Original-Change-Id: I5fab620a29aba196edf1f24ffe6a1695de1e523e
Original-Signed-off-by: Kane Chen <kane.chen@intel.com>
Original-Reviewed-on: https://review.coreboot.org/18060
Original-Tested-by: build bot (Jenkins)
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/427765
Baytrail SoC has a bug where in some cases the DisplayPort can hang
leading to a non-working display (it just stays black). To avoid this
hang, a patch was introduced in 02/2016
(1c3b1112fa - fsp_baytrail: Fix a possible hanging DisplayPort)
but per default not switched on so that each
mainboard can decide if it wants to use this patch or not.
Recently a new case of this bug was reported by Benoit Sansoni
(benoit.sansoni@kontron.com) and he requested to enable this fix per
default as it costs him a lot of time to find the cause and even the
already available fix in coreboot. To avoid this effort for someone
else in the future we can enable this fix per default as no negative
side effects are known and it is now tested at Siemens and at
Kontron on different mainboards with success.
As the goal is to enable this code permanently the config switch is not
longer needed and is removed.
BUG=none
BRANCH=none
TEST=none
Change-Id: I8865b57dafe5df73e82255367562698b1a0a56b4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: deed5fbebd
Original-Change-Id: I15bd682218d0dc887945cc91ee3e5488945a6355
Original-Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Original-Reviewed-on: https://review.coreboot.org/18109
Original-Tested-by: build bot (Jenkins)
Original-Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://chromium-review.googlesource.com/428264
Commit-Ready: Aaron Durbin <adurbin@chromium.org>
Cosmetic changes to rename car_stage.S to car_stage_fsp20.S,
so that it is associated with FSP driver version that is being used.
Tested on Kabylake Rvp11.
BUG=none
BRANCH=none
TEST=none
Change-Id: I32a6ede3d310f9a48fce42f47d4eeb729abb53da
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 15b7163821
Original-Change-Id: I869df6eb746e3982e5912c272255eab6cb008838
Original-Signed-off-by: Teo Boon Tiong <boon.tiong.teo@intel.com>
Original-Reviewed-on: https://review.coreboot.org/18083
Original-Tested-by: build bot (Jenkins)
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/428261
Commit-Ready: Aaron Durbin <adurbin@chromium.org>
mvmap2315_reset() is called from locations where we're checking for NULL
pointers. Because coverity can't tell from the code that the functions
are not returning, it's showing errors of accessing pointers after
we've determined that they're invalid.
Mark it as noreturn, and add a loop in case the reset isn't on the
next instruction. This probably isn't needed, but shouldn't hurt.
BUG=none
BRANCH=none
TEST=none
Change-Id: Icabde50124ed8206a0a114cd10002ef81a770f57
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3051cd9265
Original-Found-by: Coverity Scan #1362809
Original-Change-Id: If93084629d5c2c8dc232558f2559b78b1ca5de7c
Original-Signed-off-by: Martin Roth <martinroth@google.com>
Original-Reviewed-on: https://review.coreboot.org/18103
Original-Tested-by: build bot (Jenkins)
Original-Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Original-Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://chromium-review.googlesource.com/428257
Commit-Ready: Aaron Durbin <adurbin@chromium.org>
Die if cbmem_add can't allocate memory for the hob pointer. This
shouldn't ever happen, but it's a reasonable check.
- fsp_broadwell_de already had a check, but it returned to someplace
inside the FSP. Just die instead.
BUG=none
BRANCH=none
TEST=none
Change-Id: Ic4a743faf8fdcc7b26c9fe2ed43ce10a539f79e1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4fb64d0b88
Original-Change-Id: Ieef8d6ab81aab0ec3d52b729e34566bb34ee0623
Original-Found-by: Coverity Scan #1291162
Original-Signed-off-by: Martin Roth <martinroth@google.com>
Original-Reviewed-on: https://review.coreboot.org/18092
Original-Tested-by: build bot (Jenkins)
Original-Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://chromium-review.googlesource.com/428252
Commit-Ready: Aaron Durbin <adurbin@chromium.org>
The FSP 2.0 change broke the logic for determining whether or not
to execute the GOP binary. Modify the FSP 2.0 code to do the right
thing and check for display_init_required() before passing VBT into
FSP and the GOP binary.
BUG=chrome-os-partner:61726
TEST=disable developer mode and ensure FSP does not run GOP
Change-Id: I9c607739eb791bbb4351059d2528c194328f6b95
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7d48410631
Original-Change-Id: I7fc8055b6664e0cf231a8de34367406eb049dfe1
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://review.coreboot.org/18084
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: build bot (Jenkins)
Reviewed-on: https://chromium-review.googlesource.com/428248
Commit-Ready: Aaron Durbin <adurbin@chromium.org>
After we set the GET_TIME bit, the rtc time can't be read immediately. We
should wait up to 31.25 us, about one cycle of 32khz. Otherwise reading
RTC time will return a old time.
BUG=chrome-os-partner:61078
BRANCH=veyron
TEST=Build and Boot
Original-Change-Id: I6ec07fc6c4d6d8b27b12031423b86b8ab15da6f6
Original-Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/423272
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Change-Id: I8c168c14437bb932a59ac0e91a01062df0cf11dc
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Reviewed-on: https://chromium-review.googlesource.com/427522
Reviewed-by: Julius Werner <jwerner@chromium.org>
Nothing from that header is used or even declared since
CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT is not selected on Intel
hardware.
Change-Id: I9101eb6ffa6664a2ab45bc0b247279c916266537
Original-Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Original-Reviewed-on: https://review.coreboot.org/18044
Original-Tested-by: build bot (Jenkins)
Original-Reviewed-by: Kysti Mlkki <kyosti.malkki@gmail.com>
Original-Reviewed-by: Idwer Vollering <vidwer@gmail.com>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/425982
Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Add the Kconfig value HAVE_MONOTONIC_TIMER and the routine to read the
TSC for the monotonic timer. Simplify the routine to get the TSC
frequency.
TEST=Build and run on Galileo Gen2
BUG=None
BRANCH=None
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18002
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Change-Id: I806fb864b01e39277bf2d6276254b0543930c2f6
Reviewed-on: https://chromium-review.googlesource.com/425289
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Add Kconfig values and early debugging code to better segment and debug
the early code in bootblock by using the SD LED as an indicator. Update
the help text for the debug Kconfig values to point to the various
failure locations.
TEST=Build and run on Galileo Gen2
BUG=None
BRANCH=None
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/17985
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Change-Id: I1cd62eba3e9547cb1dd7f547aaec5d4827e14633
Reviewed-on: https://chromium-review.googlesource.com/425282
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Fix serial port configuration broken by how PCI configuration space was
referenced introduced by change 3d15e10a (MMCONF_SUPPORT: Flip default
to enabled).
TEST=Build and run on Galileo Gen2
BUG=None
BRANCH=None
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/17984
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Change-Id: I2ab52cf598795e94f1f16977f8d12b7fdd95e146
Reviewed-on: https://chromium-review.googlesource.com/425281
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Migrate duplicated enable_vmx() method from multiple CPUs to common
folder. Add common virtualization option for CPUs which support it.
Note that this changes the default to enable virtualization on CPUs
that support it.
BUG=None
BRANCH=None
TEST=None
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/17874
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins)
Change-Id: Ib110bed6c9f5508e3f867dcdc6f341fc50e501d1
Reviewed-on: https://chromium-review.googlesource.com/425255
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
TCC activation functionality has package scope. It was set
for all CPU in the system which is unnecessary.
In this patch TCC activation is being set by the BSP only.
BUG=chrome-os-partner:59397
BRANCH=None.
TEST=Built for skylake platform and verified the TCC activation
value before and after S3.
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/17889
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: Iacf64cbc40871bbec3bede65f196bf292e0149a6
Reviewed-on: https://chromium-review.googlesource.com/425252
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
SPI_ATOMIC_SEQUENCING was added to accomodate spi flash controllers with
the ability to perform tx and rx of flash command and response at the
same time. Instead of introducing this notion at SPI flash driver layer,
clean up the interface to SPI used by flash.
Flash uses a command-response kind of communication. Thus, even though
SPI is duplex, flash command needs to be sent out on SPI bus and then
flash response should be received on the bus. Some specialized x86
flash controllers are capable of handling command and response in a
single transaction.
In order to support all the varied cases:
1. Add spi_xfer_vector that takes as input a vector of SPI operations
and calls back into SPI controller driver to process these operations.
2. In order to accomodate flash command-response model, use two vectors
while calling into spi_xfer_vector -- one with dout set to
non-NULL(command) and other with din set to non-NULL(response).
3. For specialized SPI flash controllers combine two successive vectors
if the transactions look like a command-response pair.
4. Provide helper functions for common cases like supporting only 2
vectors at a time, supporting n vectors at a time, default vector
operation to cycle through all SPI op vectors one by one.
BUG=chrome-os-partner:59832
BRANCH=None
TEST=Compiles successfully
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17681
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I4c9e78c585ad95c40c0d5af078ff8251da286236
Reviewed-on: https://chromium-review.googlesource.com/424871
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
1. Define controller for fast SPI.
2. Separate out functions that are specific to SPI and flash
controller in different files.
BUG=chrome-os-partner:59832
BRANCH=None
BRANCh=None
TEST=Compiles successfully for chell and eve.
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17933
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I2fe0ef937297297339d4ea19dc37d3061caaa80c
Reviewed-on: https://chromium-review.googlesource.com/424870
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
FSP v2.0 Driver supports TempRamInit & TempRamExit APIs to initialize
& tear down Cache-As-Ram. Add TempRamInit & TempRamExit usage to
ApolloLake SoC when CONFIG_FSP_CAR is enabled.
Verified on Intel Leaf Hill CRB and confirmed that Cache-As-Ram
is correctly set up and torn down using the FSP v2.0 APIs
without coreboot implementation of CAR init/teardown.
BUG=None
BRANCH=None
TEST=None
Signed-off-by: Brenton Dong <brenton.m.dong@intel.com>
Reviewed-on: https://review.coreboot.org/17063
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: Ifd6fe8398ea147a5fb8c60076b93205bb94b1f25
Reviewed-on: https://chromium-review.googlesource.com/422956
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
There was an assumption that all SPI controllers could
consume a full page of data to write. However, that
assumption doesn't hold when spi_crop_chunk() indicates
sizes smaller than page size. If the requested offset isn't
page aligned from the start then writes will fail corrupting
data since a page boundary isn't honored.
The spansion driver needed quite a bit more work to honor
the spi_crop_chunk() result. It now mimics the other
driver's code. Also, needed to add spi_crop_chunk() to
marvell/bg4cd SoC to make google/cosmos build. SPI obviously
doesn't work on that platform, but it fixes the build error.
BUG=None
BRANCH=None
TEST=None
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17910
Tested-by: build bot (Jenkins)
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Kysti Mlkki <kyosti.malkki@gmail.com>
Change-Id: I93e24a5a717adcee45a017c164bd960f4592ad50
Reviewed-on: https://chromium-review.googlesource.com/422949
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
I've recently added an assertion to ensure that the effective I2C
frequency on Rockchip SoCs is not too far off the 400KHz target due to
divisor rounding errors. A 10KHz margin worked fine for RK3399, but it
turns out that RK3288 actually only ever hit 387KHz since its I2C clocks
are based off the already pretty low 75MHz PCLKs. While we could
probably change the PCLKs to make this closer, that seems like a too
intrusive change for something that has already worked just fine for
years, so just loosen the restriction a little more instead.
BRANCH=None
BUG=chromium:675043
TEST=None
Change-Id: I7e96a1a75b38f8ad3971dd33046699cceb17b80d
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/421095
Reviewed-by: Randall Spangler <rspangler@chromium.org>
It was unsigned, not a good place to be for testing < 0.
Change-Id: I126fe86422900bbae2c3ca16052be27985cfed53
Original-Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Found-by: Coverity Scan #1241911
Original-Reviewed-on: https://review.coreboot.org/17888
Original-Reviewed-by: Nico Huber <nico.h@gmx.de>
Original-Tested-by: build bot (Jenkins)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/421220
Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Allow a board/platform to invalidate the normal MRC cache when
hardware retraining is requested in recovery mode. A small 4 byte
payload is used to update the latest data written. It will of course
fail on MRC cache retreival on next usage.
BUG=chrome-os-partner:60592
BRANCH=reef
TEST=None
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17870
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: Ic88cd66802664813562d003f50d54e4a4ea375ef
Reviewed-on: https://chromium-review.googlesource.com/421029
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Update the mrc cache implementation to use region_file. Instead
of relying on memory-mapped access and pointer arithmetic
use the region_devices and region_file to obtain the latest
data associated with the region. This removes the need for the
nvm wrapper as the region_devices can be used directly. Thus,
the library is more generic and can be extended to work on
different boot mediums.
BUG=chrome-os-partner:56151
BRANCH=None
TEST=None
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17717
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: Ic14e2d2f7339e50256b4a3a297fc33991861ca44
Reviewed-on: https://chromium-review.googlesource.com/420843
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
BRANCH=oak
BUG=None
TEST=Boot Elm, confirm firmware USB still works and we don't get a
timeout warning here.
Change-Id: Ic1d1b85a1d7e85b555a93b3a0b55fe310b26e34a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1353362
Reviewed-on: https://chromium-review.googlesource.com/419795
Commit-Ready: Julius Werner <jwerner@chromium.org>
Tested-by: Julius Werner <jwerner@chromium.org>
The value for _size was not evaluated correctly if ramstage
is relocated, make the calculation runtime.
While touching it, move symbol declarations to header file.
BUG=None
BRANCH=None
TEST=None
Signed-off-by: Kysti Mlkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17784
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I4402315945771acf1c86a81cac6d43f1fe99a2a2
Reviewed-on: https://chromium-review.googlesource.com/418872
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Set aclk_emmc and clk_emmc to 148.5MHz under hs400es mode, which could
improve stability like kernel.
CQ-DEPEND=CL:386527
BUG=chrome-os-partner:54377
BRANCH=none
TEST=build and boot on kevin
Change-Id: If4754d22e83a0f9a029fedca12f26ff5ae8d44e1
Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com>
Reviewed-on: https://chromium-review.googlesource.com/386865
Commit-Ready: Julius Werner <jwerner@chromium.org>
Tested-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Previously privilege drop was happening "too early" and that caused some
PMC IPC programming (performed in FSP) to fail because sideband was
already locked out. This change set moves privilege drop to later stage,
after last FSP notify call.
BRANCH=reef
BUG=chrome-os-partner:60657
TEST=iotools rdmsr X 0x121, make sure they can't be read.
Also dmesg|grep -i IPC to make sure there are no errors related
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/17769
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: Ia3a774aee5fbf92805a5c69093bfbd3d7682c3a7
Reviewed-on: https://chromium-review.googlesource.com/418440
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The EM4/EM5 registers in the mini-HD audio device must be set based
on the GPU cdclk value in order for HDMI audio to function properly.
Add variables to save the correct values when initializing the GPU,
and accessor functions to retrieve them in order to set the registers
when initializing the mini-HD audio device.
BUG=None
BRANCH=None
TEST=None
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/17718
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Change-Id: Icce7d5981f0b2ccb09d3861b28b843a260c8aeba
Reviewed-on: https://chromium-review.googlesource.com/418368
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
1. Define controller for fast SPI.
2. Separate out functions that are specific to SPI and flash controller
in different files.
BUG=chrome-os-partner:59832
BRANCH=None
TEST=Compiles successfully for reef.
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17562
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Change-Id: If07db9d27bbf4f4eb6024175cb7753c6cf4fb793
Reviewed-on: https://chromium-review.googlesource.com/418364
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Skylake uses a special SPI Flash controller and does not require
spi_claim_bus and spi_release_bus functionality. This was a leftover
call from earlier cleanup, so remove it.
BUG=None
BRANCH=None
TEST=None
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17729
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: Iea260813cf72b94b7e7c661dbe494a74351dc357
Reviewed-on: https://chromium-review.googlesource.com/418362
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Resource is actually stored even before read_resources, but
that's where we currently log this resource.
For Intel, use PCI config register offset as the resource
index, while AMD side uses MSR address.
BUG=None
BRANCH=None
TEST=None
Signed-off-by: Kysti Mlkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17696
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I6eeef1883c5d1ee5bbcebd1731c0e356af3fd781
Reviewed-on: https://chromium-review.googlesource.com/417956
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Doing PCI config operations via MMIO window by default is a
requirement, if supported by the platform. This means chipset
or CPU code must enable MMCONF operations early in bootblock
already, or before platform-specific romstage entry.
Platforms are allowed to have NO_MMCONF_SUPPORT only in the
case it is actually not implemented in the silicon.
BUG=None
BRANCH=None
TEST=None
Signed-off-by: Kysti Mlkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17693
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: Id4d9029dec2fe195f09373320de800fcdf88c15d
Reviewed-on: https://chromium-review.googlesource.com/417953
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
MMCONF was explicitly used here to avoid races of 0xcf8/0xcfc access
being non-atomic and/or need to access 4kiB of PCI config space.
All these platforms now have MMCONF_SUPPORT_DEFAULT.
BUG=None
BRANCH=None
TEST=None
Signed-off-by: Kysti Mlkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17545
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: If62537475eb67b7ecf85f2292a2a954a41bc18d1
Reviewed-on: https://chromium-review.googlesource.com/417078
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
MMCONF was explicitly used here to avoid races of 0xcf8/0xcfc access
being non-atomic and/or need to access 4kiB of PCI config space.
All these platforms now have MMCONF_SUPPORT_DEFAULT.
BUG=None
BRANCH=None
TEST=None
Signed-off-by: Kysti Mlkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17529
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I943e354af0403e61263f1c780f02c7b463b3fe11
Reviewed-on: https://chromium-review.googlesource.com/417077
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
