erebion/coreboot
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

mb/starlabs/starbook/{adl,rpl}: Remove USB OverCurrent Configuration

Browse source 
This isn't supported so remove it.

Change-Id: I8e8a87f1394199d3288ae27601069ad88e2fa74f
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/89512
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
This commit is contained in:
Sean Rhodes 2025-10-02 14:52:34 +01:00
commit f7512c8647
3 changed files with 8 additions and 8 deletions
Download patch file Download diff file Expand all files Collapse all files

4
src/mainboard/starlabs/starbook/variants/adl/devicetree.cb
View file

@ -65,14 +65,14 @@ chip soc/intel/alderlake
register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)"
# Daughterboard USB 3.0 Type-A
register "usb2_ports[6]" = "USB2_PORT_MID(OC0)"
register "usb2_ports[6]" = "USB2_PORT_MID(OC_SKIP)"
register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)"
# Internal Webcam
register "usb2_ports[CONFIG_CCD_PORT]" = "USB2_PORT_MID(OC_SKIP)"
# Fingerprint Reader
register "usb2_ports[5]" = "USB2_PORT_MID(OC0)"
register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)"
# Daughterboard USB 2.0 Type-A + SD Card Reader
register "usb2_ports[3]" = "USB2_PORT_MID(OC_SKIP)"

8
src/mainboard/starlabs/starbook/variants/rpl/devicetree.cb
View file

@ -106,22 +106,22 @@ chip soc/intel/alderlake
device ref gna on end
device ref xhci on
# Motherboard USB TBT Type-C
register "usb2_ports[0]" = "USB2_PORT_MID(OC5)"
register "usb2_ports[0]" = "USB2_PORT_MID(OC_SKIP)"
register "tcss_ports[0]" = "TCSS_PORT_DEFAULT(OC_SKIP)"
# Motherboard USB 3.0 Type-A
register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)"
register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC5)"
register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)"
# Daughterboard USB 3.0 Type-A
register "usb2_ports[6]" = "USB2_PORT_MID(OC0)"
register "usb2_ports[6]" = "USB2_PORT_MID(OC_SKIP)"
register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)"
# Internal Webcam
register "usb2_ports[CONFIG_CCD_PORT]" = "USB2_PORT_MID(OC_SKIP)"
# Fingerprint Reader
register "usb2_ports[5]" = "USB2_PORT_MID(OC0)"
register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)"
# Daughterboard USB 2.0 Type-A + SD Card Reader
register "usb2_ports[3]" = "USB2_PORT_MID(OC_SKIP)"

4
src/mainboard/starlabs/starbook/variants/rpl/gpio.c
View file

@ -112,7 +112,7 @@ const struct pad_config gpio_table[] = {
/* A15: Test Point 52 */
PAD_NC(GPP_A15, NONE),
/* A16: USB OverCurrent 3 */
PAD_CFG_NF(GPP_A16, NONE, DEEP, NF1),
PAD_NC(GPP_A16, NONE),
/* A17: Not Connected */
PAD_NC(GPP_A17, NONE),
/* A19: Not Connected */
@ -272,7 +272,7 @@ const struct pad_config gpio_table[] = {
/* E7: Embedded Controller SMI */
PAD_NC(GPP_E7, NONE),
/* E9: USB OverCurrent 0 */
PAD_CFG_NF(GPP_E9, NONE, DEEP, NF1),
PAD_NC(GPP_E9, NONE),
/* E10: PWD Amplifier Input */
PAD_NC(GPP_E10, NONE),
/* E13: Not connected */