Falco/Slippy: Patch to remove redundant graphics initializations

gma_fui_init repeats the initializations already performed in gma_setup_panel.
These redundant initializations reset any gtt settings done before this call.
Hence, they had to be done again after call to gma_fui_init. However, the call
gma_fui_init is not required at all. Does not affect the behavior of suspend/resume.

Old-Change-Id: Idfb9f9930624694b878ddc0fe8648b3c8dd80e55
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/65997
Reviewed-by: Ronald G. Minnich <rminnich@chromium.org>
Reviewed-by: Stefan Reinauer <reinauer@google.com>
Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit c376aea1b8)

Falco/Slippy: Patch to fix garbage on screen during graphics initialization in normal mode

Depending on the init_fb parameter:
1) For normal mode, first page is filled with zeroes and setgtt is used make all GTT entries point to this
same page
2) For developer/recovery mode, we init the gtt to consecutive pages

Old-Change-Id: I281b0b7efe01f7892e98b19ff9a63c04b087bd2c
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/65633
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 97c99dfe52)

Squashed two graphics related commits for Falco/Slippy.

Change-Id: I7ddb92672c026fe66f9fb0caba9d8fdc3f8a9d0a
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6536
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This commit is contained in:
Furquan Shaikh 2013-08-15 15:23:58 -07:00 committed by Patrick Georgi
commit cb61ea7a13
2 changed files with 29 additions and 90 deletions

View file

@ -30,6 +30,10 @@
#include "chip.h"
#include "haswell.h"
#if CONFIG_CHROMEOS
#include <vendorcode/google/chromeos/chromeos.h>
#endif
struct gt_reg {
u32 reg;
u32 andmask;
@ -403,12 +407,18 @@ static void gma_func0_init(struct device *dev)
#if CONFIG_MAINBOARD_DO_NATIVE_VGA_INIT
printk(BIOS_SPEW, "NATIVE graphics, run native enable\n");
u32 iobase, mmiobase, physbase;
/* Default set to 1 since it might be required for
stuff like seabios */
unsigned int init_fb = 1;
iobase = dev->resource_list[2].base;
mmiobase = dev->resource_list[0].base;
physbase = pci_read_config32(dev, 0x5c) & ~0xf;
int i915lightup(u32 physbase, u32 iobase, u32 mmiobase, u32 gfx);
lightup_ok = i915lightup(physbase, iobase, mmiobase, graphics_base);
#ifdef CONFIG_CHROMEOS
init_fb = developer_mode_enabled() || recovery_mode_enabled();
#endif
int i915lightup(unsigned int physbase, unsigned int iobase, unsigned int mmio,
unsigned int gfx, unsigned int init_fb);
lightup_ok = i915lightup(physbase, iobase, mmiobase, graphics_base, init_fb);
if (lightup_ok)
gfx_set_init_done(1);
#endif