Use the proper dxio_link_hotplug_type enum values for the link_hotplug
field in the DXIO descriptors to replace the magic values in the code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ieb1513737e6022a668287dc80a39d96cda2b18d5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76439
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Change `CBFS_SIZE` to match the actual BIOS region size, as specified in
the FIT XML config.
Fixes building with `VALIDATE_INTEL_DESCRIPTOR` selected.
Change-Id: I91a46b3ed6cc3161df27eed19d8cdf2820e90d7e
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76326
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
It moves cr50_plat_irq_status() to common code and adds Kconfig
option to specify GPIO used for interrupt.
BUG=b:277787305
TEST=Build all affected platform and confirm using right GPIO
number. Tested on Skyrim.
Change-Id: I775c4e24cffee99b6ac3e05b58a75425029a86c8
Signed-off-by: Grzegorz Bernacki <bernacki@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75621
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
This configures GPIO IO Standby State of GPP_F00 - GPP_F05 as masked
for CNVi.
Meteor Lake rex platform does not wake up from low power state by
bluetooth keyboard and mouse properly. It is identified that IO Standby
State needs to be configured as masked to function properly for CNVi.
BUG=b:286803481
TEST=Make screebo suspend to s0ix state and press a key from
bluetooth keyboard. Check the platform wakes up properly from s0ix.
Change-Id: I7fd342e52fa0f9126eab4c857a5adc04c26e49c6
Signed-off-by: Wentao Qin <qinwentao@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76406
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Pujjo support WWAN EM060 device, use FW_CONFIG to handle the
power on sequence.
BUG=b:290709711
TEST=Build and check WWAN EM060 power on sequence.
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Change-Id: I66800c75274e8e1e55d4314c82b7fcdf2a4477bd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76403
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
With the latest hardware revision, the polarity of GPP_B5 has been
changed. For a full-populated DRAM configuration, the input signal is
now connected to 3.3 V and for a half-populated configuration it is
connected to ground.
BUG=none
TEST=Use different populated mainboards and check coreboot log
GPP_B5 = 0:
[INFO ] meminit_channels: DRAM half-populated
[DEBUG] 1 DIMMs found
GPP_B5 = 1:
[DEBUG] 2 DIMMs found
Change-Id: Iaa3a63fa52c802d8f5d8c6cc11dd6edfac117e88
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76434
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Modify reset_delay_ms from 300ms to 6ms for ELAN EKTH7D18.
BUG=b:285999032
BRANCH=firmware-nissa-15217.B
TEST=boot uldren to ChromeOS and touchscreen is workable.
Change-Id: Iffcddbe7735b7a837887dec68e1270c2af5f4556
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76417
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Avoid enabling SIO UART to prevent conflicts with BMC console; utilize VUART0 instead.
TEST=Build for sbp1 & make sure coreboot logs do not spill into BMC
console. Also made sure coreboot logs are accessible via VUART.
Change-Id: I2d4bbd74bb7d37b74378650dd569bca7fa13c29b
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76396
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Set coreboot ready gpio. This gpio is used to indicate to BMC of BIOS
completion.
Change-Id: Iaed8bec12e593cf1687d973765b0117bdc115cb8
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76404
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
CPUID is the same for Alder Lake and Raptor Lake S and HX variants.
To reduce the confusion and concerns how to name the macros, remove
the suffixes from macros and platform reporting strings. Thankfully
the stepping names are unique across mobile (P suffixed) and desktop
(S and HX suffixed) SKUs. Distinguishing the S from HX is possible via
host bridge PCI ID.
Change-Id: Ib08fb0923481541dd6f358cf60da44d90bd75ae2
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76203
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
The CB:76219 removed mtk_i2c_bus_init() from tps65132s_setup(), so
we should initialize I2C bus for TPS65132 in mainboard now.
BUG=None
TEST=./util/abuild/abuild -t google/geralt -a
Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Change-Id: Iacf78221d2416f41467c709402b7e02e03dc5fc7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76358
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
There is no PCH FIVR participant on MTL and we should remove it
in Rex.
TEST=compile ok and make sure there no TPCH device in acpi
BUG=b:290322310
Change-Id: Icf4be86da3f3cb9b1f0a3f2586b029a533c3e6a9
Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76402
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This configures GPIO IO Standby State of GPP_F00 - GPP_F05 as masked
for CNVi to function properly with the connected bluetooth devices and
wake up from low power state.
BUG=None
TEST=None
Change-Id: I977493fd95a99381279f5a3f5e679e4893369b8a
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76362
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
This configures GPIO IO Standby State of GPP_F00 - GPP_F05 as masked
for CNVi.
Meteor Lake rex platform does not wake up from low power state by
bluetooth keyboard and mouse properly. It is identified that IO Standby
State needs to be configured as masked to function properly for CNVi.
BUG=None
TEST=Make rex platform suspend to s0ix state and press a key from
bluetooth keyboard. Check the platform wakes up properly from s0ix.
Change-Id: Ia98abde584699fa01acba47a9df4ef6332ac16fd
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76338
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The actual NVM size of camera module is 64KB; however, only 8KB is in
use to store data. This reduces the size of both NVM0 and NVM1 to 8KB
to minimize the time taken to read NVM and launch Camera preview.
BUG=NONE
TEST=Launch Chrome camera application and check the time taken to
read eeprom from camera service log and show camera preview. It takes
2 to 3 seconds to show camera preview while it takes 4 to 5 seconds
without the changes.
Before the changes:
06:21:04.204944Z OpenDevice(): camera_id = 1
06:21:07.297584Z Read camera eeprom from eeprom
06:21:08.763491Z Read camera eeprom from nvmem
After the changes:
21:37:23.923676Z OpenDevice(): camera_id = 1
21:37:24.386020Z Read camera eeprom from eeprom
21:37:24.574515Z Read camera eeprom from nvmem
Change-Id: I0e2272b3307fea60ea7406fc6899ae2cb0134fa3
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76189
Reviewed-by: Kiran2 Kumar <kiran2.kumar@intel.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Update eMMC DLL tuning values for improved initialization reliability
BUG=b:289763421
TEST=cold reboot stress test over 5000 cycles on Foresee and Kingston
eMMC
Change-Id: I63077b8717feecf3d50507abb188b7fadb5d6c79
Signed-off-by: Simon Yang <simon1.yang@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76221
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch skips reading the MEM_CH_SEL GPIO aka GPP_E13 to determine
the memory channel configuration. The signal behavior is not proper,
hence limiting the DIMM capacity to half (only MC0 is enabled).
This patch always reports the full memory capacity as in dual channel
(both MC0 and MC1 enabled).
This change is necessary to ensure that the system reports the correct
memory capacity, even if the MEM_CH_SEL GPIO is not working properly.
BUG=b:290174538
TEST=Able to detect 32GB memory capacity while booting google/ovis.
Without this patch:
localhost ~ # cat /proc/meminfo
MemTotal: 16183080 kB
With this patch:
localhost ~ # cat /proc/meminfo
MemTotal: 32673664 kB
Change-Id: I6c3fa941abb044b79b13785f7b65d09957f0487d
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76359
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Since multiple GFX entry causes an ACPI error when trying to write _DOD
method multiple times, combine the GFX entry into one so that _DOD
method is written just once.
BUG=b:289854155
TEST=emerge-brya coreboot
Signed-off-by: Won Chung <wonchung@google.com>
Change-Id: I22ad70d50f1aecf8da70e8dd04a36a0a7c1c7609
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76329
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
This CL corrects the trigger for HID over SPI from Level to Edge.
BUG:None
TEST:Tested with I2C and SPI
Change-Id: I78937af22df22d80a702477b6790a7aa40d782a4
Signed-off-by: Eran Mitrani <mitrani@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76116
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
The AW37503 is designed to supply positive/negative supply for driving
the MIPI panel. It doesn't integrate non-volatile memory(EEPROM), so we
need to program the registers at boot. We program the target
positive/negative output voltage via I2C and enable the power rails by
pulling up ENP and ENN pins.
On Starmie, we need +/-6V power supply for the MIPI panel. We program
the AW37503 registers in coreboot so that kernel can control AW37503
via fixed regulators without additional settings(what we did for
TPS65132). Since we distinguish AW37503 and TPS65132 by reading the
vendor ID, we need to initialize I2C bus as early as possible.
Therefore, we move mtk_i2c_bus_init() to mainboard_init().
BUG=b:289482828
TEST=emerge-staryu coreboot chromeos-bootimage
TEST=Test the sequence the voltage
Change-Id: I9ccd4db19c93a032226f006eab0427f78f7b6dc8
Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76219
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: cong yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The BT VGPIOs pad config in variant of gpio.c won't be overwritten on board eventually because no matched gpios existed here.
Put BT VGPIOs in gpio_table, ensure that these were able to be overwritten.
The fix included crota and omnigul BT offload work successfully.
BUG=b:264834572
TEST=test Bluetooth offload playback/capture in SCO profile.
Change-Id: I62cecf26abd0411f7cbb0a56b8b8f0a25d370c69
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76247
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
Add fw_config and configurate AUX pin for MB USB Type-C.
MB USB3 doesn't have re-timer, thus have to configurate the AUX pin.
BUG=b:275335023
TEST=build pass
Change-Id: I1334dcbaec6de1707c6892efbebaf8d460ba8648
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76348
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bob Moragues <moragues@google.com>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Add a new apcb edit tool, apcb_v3a_edit.py, that injects SPDs into
an APCB for phoenix platform.
The tool makes several assumptions:
* Each SPD only uses blocks 0, 1, 3 and 5. All other blocks are zero.
* Each block is 64 bytes.
* Dimm and socket are always 0
* Unused SPD entries are zero'd
BUG=b:281983434
BRANCH=None
TEST=build, flash, boot myst
Change-Id: Ifb50287de77138170714a702ab87d56427aacfef
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76188
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
tis_plat_irq_status() function is used only by Google TPM. It should
be moved to drivers/tpm/cr50.c. The name of the function was changed
to cr50_plat_irq_status().
BUG=b:277787305
TEST=Build all affected platforms
Change-Id: I78dc39f2c7b44232b06947d3dfe6afa52807ced8
Signed-off-by: Grzegorz Bernacki <bernacki@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75917
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Always exit 4-byte addressing mode to prevent errors when the spi flash
is not left in 4-byte addressing mode.
TEST=boot with PSP releases that leave the flash in both 4-byte
and 3-byte mode and verify flash writes
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I9884b85bc3b0a9b654a2cb91fb314b0869abd622
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76094
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
GPIO GPP_B5 is used as input on this mainboard. For a full-populated
DRAM configuration, the input signal is connected to ground and for a
half-populated configuration it is connected to 3.3 V.
BUG=none
TEST=Use different HW configurations and check coreboot log
GPP_B5 = 0:
[DEBUG] 2 DIMMs found
GPP_B5 = 1:
[INFO ] meminit_channels: DRAM half-populated
[DEBUG] 1 DIMMs found
Change-Id: I48b4a3bea7f1ff804b78b7c648a7ea1925627b8a
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76245
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
There can be mainboard variants, which are only equipped with
half-populated DRAM. For this reason, the meminit parameter for
populatation should be adjustable. The default setting remains at
full-populated DRAM. At mainboard variant level a different selection
via individual input paths can be made.
Change-Id: I390bbfa680b5505bb2230fa0740720bd9dd1fafb
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76244
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Align implementation with real hardwares, such that ECAM
(PCI configuration via MMIO) is available for use when
console is initialised.
Change-Id: I288991f31d3f1678132aa4315168c09eabbbe98d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76206
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This devices is always present so hooking up the ops in devicetree makes
more sense.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I369129e365ce8596cad25b97d12168bb08e3ed0e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76241
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
None of these boards have an RTC battery, so this option has no
effect. Remove it.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I9a55227f74c0b9ae9b56bdef4b8f53b2425b331c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75450
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
It is not needed, so remove it.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I606d0a76926e90e4ce321163400aa50ea961c2a0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75342
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Add new memory parts in the mem_parts_used.txt and generate the
SPD ID for the parts. The memory parts being added are:
1. K4U6E3S4AB-MGCL (Samsung)
2. K4UBE3D4AB-MGCL (Samsung)
BUG=b:289873670
BRANCH=brya
TEST=emerge-brya coreboot chromeos-bootimage
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: I7a262ac62c24cfb43c0283c9730c177a242342e6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76240
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
VP2420 (vault_ehl) has only 1 DIMM slot present. Set the DIMM_MAX to 1
to optimize the common libraries to not attempt to read and parse more
SPD than needed.
TEST=Boot Protectli VP2420 (vault_ehl) with different DIMMs and see
FSP is retraining the memory properly and fastboot is working.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I29a99f387ffe2df1060547e0818c5c5b66a27061
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73819
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Michał Kopeć <michal.kopec@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Set tcc_offset value to 20 in chipset for Thermal Control
Circuit (TCC) activation feature for meteorlake silicon.
Also, remove tcc_offset default value from rex baseboard
and variants.
BUG=b:270664854
BRANCH=None
TEST=Build FW and test on rex board
Change-Id: Ieec1b7e0873eef46a56e612ed1d9445019b1f4a9
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76232
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Set tcc_offset value to 10 in devicetree for Thermal Control
Circuit (TCC) activation feature for ovis.
BUG=b:270664854
TEST=Build and boot google/ovis.
Change-Id: I0ef626f6cc460f1b460297804b97038705efaf4c
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76230
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
This patch adds a power limit for Ovis with 28W Intel Meteor Lake
silicon.
Reference: Intel MTL-UH_Power_Map_Rev1p2, doc: 640982
BUG=b:289854108
TEST=Able to boot google/ovis with power limit being overridden as
appropriate to 28W.
Change-Id: I312c70720fd89261c53d5bd4f45236e829d6c790
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76229
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Currently, boards with ES2 silicon are unable to boot with crashlog
enabled because crashlog driver is unable to handle invalid data.
Temporarily disable the crashlog to unblock development until the issue
is fixed.
BUG=b:289749310
TEST=Able to boot to the OS on Screebo
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: Ic63cf9cf5bfa2c92d8f2c5b13df2f23dc118b389
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76231
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
This patch enables BT offload feature for soundwire audio over SSP1.
BT mode is selected via FW_CONFIG and corresponding VGPIOs are
programmed.
BUG=b:275538390
TEST=build and verify BT offload on rex soundwire audio
Change-Id: I99df78787d9f54c91bcedf6f70352890a715cdb3
Signed-off-by: Uday M Bhat <uday.m.bhat@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75924
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Follow the Project_Uldren_Thermal_paramters_list_2023_0626.xlsx to
modify DPTF parameters and tcc_offset.
- Set tcc_offset to 3.
- Update Critical Policy trip point.
- Update Power Limits PL1 minimum step size to control limits (in mW).
BUG=b:282598257
BRANCH=firmware-nissa-15217.B
TEST=boot uldren to ChromeOS and pass thermal test.
Change-Id: Ic5bbb3aa3b036a1eae8a95f63b570db2dc6da978
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76105
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Yang <paul.f.yang@intel.corp-partner.google.com>
Reviewed-by: Ivan Chen <yulunchen@google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
