This refactoring ensures bmp_load_logo() takes logo_size as an
argument, returning a valid logo_ptr only if logo_size is non-zero.
This prevents potential errors from mismatched size assumption.
BUG=b:242829490
TEST=google/rex0 builds successfully.
Change-Id: I14bc54670a67980ec93bc366b274832d1f959e50
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81618
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
unlock_pam_regions() is needed for SKX and CPX. Put the codes into
chip_gen1.c so that it could be shared among SoC generations.
After shared, unlock_pam_regions() is still called from SKX and
CPX SoC specific codes. SPR will also use chip_gen1.c, but it will
not call unlock_pam_regions().
TEST=Build and boot on intel/archercity CRB
Change-Id: Idbc7dc6dd22a1747a65543666fc714a0872e6b37
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81619
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Fast SPI code assumes only one SPI flash is present. The SPI flash
driver for older southbridges is able to detect multichip. See the
spi_is_multichip() in src/southbridge/intel/common/spi.c.
Some boards (e.g. Lenovo ThinkCentre M920 Tiny) still come with two
chips populated instead of one. With this change, both chips are probed,
and the correct total size is calculated. Otherwise, only the first one
was probed, which resulted in an error such as:
SF size 0x1000000 does not correspond to CONFIG_ROM_SIZE 0x1800000!!
Change-Id: I8d7449f9e1470dc234fe5ba5217d3ce4c142b49c
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Signed-off-by: Maciej Pijanowski <maciej.pijanowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80608
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Call into FSP-T using the protected mode wrapper
and enter long mode in FSP-T support assembly code.
TEST: Booted on ibm/sbp1 in long mode.
Change-Id: Id6b9780b06b4bfbb952e32091ffbf3d0014f2090
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81281
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
intel/common/block/acpi provides default soc_get_ioapic_info for
single IOAPIC model. Use the default soc_get_ioapic_info when
XEON_SP_HAVE_IIO_IOAPIC is not set. This model fits for SPR and
later.
TEST=Build and boot on intel/archercity CRB
Change-Id: I1ecfba49cd9b4dfbb3f11d58d04d07ea1752a131
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81628
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Currently the SRAT table only exposes one proximity group as
it uses the LAPIC node_id, which is always initialized to 0.
Use CPUID leaf 0x1f or 0xb to gather the node ID and fill it
to make sure that at least one proximity group for every socket
is advertised.
For now the SNC config isn't taken into account.
Change-Id: Ia3ed1e5923aa18ca7619b32cde491fdb4da0fa0d
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81515
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
unlock_pam_regions routes Programmable Attribute Map (PAM) access
to DRAM. In SPR, PAM routing to DRAM is covered by FSP. Move the
step to SoC specific codes.
TEST=intel/archercity CRB
Change-Id: I3fd1d806807449e6a4d9d4d2c8a47ce61ed53018
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81349
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
IBL (Integrated Boot Logic) provides a subset of server
PCH logics for no-PCH solution. IBL is with limited features
and registers exposed, PCIe root ports/USB/SATA/LAN support are
removed.
Change-Id: I8f3d64a2dd3b79ec5a9e4306f40b012b00387259
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81314
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Granite Rapids (6th Gen Xeon-SP) FSP introduces UDS_STACK_RES/
UDS_SOCKET_RES and retires the usages of STACK_RES/
IIO_RESOURCE_INSTANCE. Make redinitions to make Xeon-SP common
codes to work for both 6th Gen before and later.
Change-Id: I28c948525cd6d7ac4b9c3fa67e3c99ec637ed38f
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81040
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The RPL FSP currently uses HECI commands to retrieve the chipset
initialization version because the MBP HOB creation is disabled
(SkipMbpHob=1). This has resulted in an approximate 150ms increase in
boot time. Investigations are ongoing to determine the cause of the
delay when using HECI commands. As an interim solution, this patch sets
SkipMbpHob=0, enabling the use of MBP HOB or acquiring the chipset
initialization version, which is expected to reduce the boot time.
BUG=b:328430167
TEST= Able to build,boot and collect boot time data of brya.
With this patch:
963:returning from FspMultiPhaseSiInit 1,337,481 (249,046)
Without this patch:
963:returning from FspMultiPhaseSiInit 1,496,268 (408,194)
Signed-off-by: Kilari Raasi <kilari.raasi@intel.com>
Change-Id: I8a99a57b644732074e41051d99e63576f1edd229
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81446
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
GraniteRapids (6th Gen Xeon-SP) FSP contains changes in IIO stack
descriptors impacting the way of coreboot's creation of domains.
Separates the codes as preparation for 6th Gen and later platforms.
Change-Id: Iab6acaa5e5c090c8d821bd7c2d3e0e0ad7486bdc
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81312
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
With SMM holding page tables itself, we can consider SMM support stable
and safe enough for general use.
Also update the respective documentation.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Ifcf0a1a5097a2d7c064bb709ec0b09ebee13a47d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80338
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
When switching back and forth between 32 to 64 bit mode, for example to
call a 32-bits FSP or to call the payload, new page tables in the
respective stage will be linked.
The advantages of this approach are:
- No need to determine a good place for page tables in CBFS that does
not overlap.
- Works with non memory mapped flash (however all coreboot targets
currently do support this)
- If later stages can use their own page tables which fits better with
the vboot RO/RW flow
A disadvantage is that it increases the stage size. This could be
improved upon by using 1G pages and generating the pages at runtime.
Note: qemu cannot have the page tables in the RO boot medium and needs
to relocate them at runtime. This is why keeping the existing code with
page tables in CBFS is done for now.
TEST: Booted to payload on google/vilbox and qemu/q35
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Ied54b66b930187cba5fbc578a81ed5859a616562
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80337
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When linking in page tables more place is needed. Size the bootblock is
top aligned, this has no impact the final size for existing setups.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I23f176d63d3c303b13331a77ad5ac6c7a19073d3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80348
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
This does the following:
- Top align the bootblock so that the only the memory needed gets used.
This might slightly reduce the time the PSP needs to decompress the
bootblock in memory
- Use a memory directive to assert that the 16bit code is inside the top
64K segment
- Use the program counter less. While the BDF linker is happy about
running the program counter backwards, LLD is not. There is no
downside to this.
- Use a symbol rather that the program counter for sections. LLD gets
confused when (.) is used along with '<': it places the section at the
start of the memory region, rather than at the program counter. Using
a variable name works around this.
- Use a 'last_byte' section to make sure the first instruction is at
0xfff0. Both the BDF and the LLD linkers seems to work well with this
code
TEST: Both BFD and LLD are able to link the bootblock
Change-Id: I18bdf262f9c358aa01795b11efcb863686edc79c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81433
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
No functional changes. Refactor code such that there won't be any
compiler or linker errors if TSS 1.2 and TSS 2.0 were both compiled
in.
One might want to support both TPM families for example if TPM is
pluggable, while currently one has to reflash firmware along with
switching TPM device.
Change-Id: Ia0ea5a917c46ada9fc3274f17240e12bca98db6a
Ticket: https://ticket.coreboot.org/issues/433
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69160
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
This patch adds timestamp start/end entries around the eSOL
implementation to track the panel initialization time while rendering
the eSOL screen.
TEST=Able to build and boot google/omnigul.
555: started early sign-off life (eSOL) notification 643,694 (40)
556: finished early sign-off life (eSOL) notification 1,072,143 (428,449)
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I51c04fc4bd2540b3f42e2f896178521d297ef246
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81387
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
The memmap_early_dram struct is now only used inside the non-CAR
memmap.c, so move the struct definition there.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id2bb3d3a9e01e9bae9463c582cb105b95c673a38
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81432
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Only the VGA MMIO range used the VGA_MMIO_* defines, but instead of
using constants for the end of the region before that and the beginning
of the region after that, the VGA_MMIO_* defines can be used.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I45c3888efb942cdd15416b730e36a9fb1ddd9697
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81391
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Since the code for reporting the memory map below cbmem_top is basically
identical for all non-CAR AMD SoCs, factor this out into a common
read_lower_soc_memmap_resources implementation.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id64462b97d144ccdf78ebb051d82a4aa37f8ee98
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81389
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Move the XHCI code into soc/intel/xeon_sp/ebg where it belongs.
TEST=intel/archercity CRB
Change-Id: I2206ec5426a0f922cfce0e2d968e6806d349a6b2
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81370
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Since there's no code using those defines drop them.
TEST=intel/archercity CRB
Change-Id: I507b08a62ebeae14a1e63f4340b0592605a32477
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81369
Reviewed-by: Jincheng Li <jincheng.li@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
To bring genoa_poc more in line with the other AMD SoCs, move the
reporting of the memory map up to cbmem_top from the openSIL-specific
add_opensil_memmap function to read_soc_memmap_resources. This is a
preparation for making this code common for all newer AMD SoCs.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic06282baa3bb9a65d297b5717697a12d08605d2f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81388
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Other files in the commits that added these files were licensed under
GPL-2.0-only, and the project as a whole is GPL-2.0-only, so use that
as the license.
Change-Id: I6c1a7ba582f61f98069ebf3857a8b5bdc8588c3e
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81421
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Older parts do not have the menvcfg csr.
Provide a Kconfig variable, default y, to enable it.
Check the variable in the payload code, when coreboot SBI
is used, and print out if it is enabled.
The SiFive FU540 and FU740 do not support this register;
set the variable to n for those parts.
Add constants for this new CSR.
Change-Id: I6ea302a5acd98f6941bf314da89dd003ab20b596
Signed-off-by: Ronald G Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81425
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Move the gpp_bridge_* device functions that are bridges to the external
PCIe ports below the corresponding mpio chip. This avoids the need for
dummy devices and does things in a slightly more coreboot-native way.
TEST=PCIe lane config reported by openSIL is identical
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: Varshit Pandya <pandyavarshit@gmail.com>
Change-Id: I7e39bf68d30d7d00b16f943953e8207d6fe9ef41
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81340
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Different SoC generations might have different FSP header files. It is
recommended to put these uncommon header files in soc_util.h so that
Xeon-SP codes refer to soc_util.h to include them in a clean way.
TEST=intel/archercity CRB
Change-Id: Icfc20921efe00bc69b0c16c665f65f5baae4c309
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81229
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Adds config-based guards for Usb4CmMode and CnviWifiCore UPDs, specific
to Twin Lake SoCs (SOC_INTEL_TWINLAKE).
Prevents compilation errors due to missing UPD definitions.
BUG=b:330654700
TEST=Able to build google/tivviks.
Change-Id: I6e0a9a7536df6295e23bf06003539e56bb98a311
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81376
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
With the last FSP submodule update for Elkhart Lake commit f8df905e7b
("3rdparty/fsp: Update submodule to upstream master"), the binary name
was changed to FSP.fd.
Change-Id: Ibc87ea2744e971d58e9a402f7cf04ef3f316f3b8
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81344
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Drop RMRR entry for XHCI controller since it's not under BIOS control.
There's no USB-PS/2 emulation done in SMM, hence it's not needed.
TEST=intel/archercity CRB
Change-Id: I5afd68371d71a00988fe0f8a6045ec5ce2adc6a1
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81297
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Let ACPI DSDT figure out by itself if a stack is enabled.
Allows to drop uncore_fill_ssdt() on all platforms.
TEST=intel/archercity CRB
Change-Id: Ib9051d608147f2de228509ff6b13871ca3183979
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81273
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
As of now coreboot only supported one PCI segment group and thus the
MMCONF size had to be limited to 256 buses on ibm/sbp1. Since the
default FSP doesn't allow to disable unused IIO stacks a patched
version had to be used. Those unused IIO stacks consume lots of PCI
bus ranges, leaving no free buses for the secondary side behind PCI
bridges. The IIO disable mechanism doesn't work after ACPI G3 exit
and thus requires multiple reboots when the previous state was G3.
Since coreboot now supports multi PCI segment groups enable 512
MMCONF buses on 4S platforms by default and drop the IIO stack
disable UPDs on ibm/sbp1. This allows to boot faster without the
need for a patched FSP.
The use of multiple PCI segment groups might prevent legacy software
from working properly, however the only board where multiple PCI
segment groups are used uses u-root as default payload.
TEST=Booted on ibm/sbp1 to ubuntu22.04 using two PCI segment groups.
TEST=intel/archercity CRB
Change-Id: I4e6e5eca1196d4ab50e43b4b58d24eca444ab519
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81187
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Add PCI enumeration support by reading the PCIeSegment reported in the
FSP HOB and add it when creating the PCI domain for each stack.
The PCI enumeration will be able to scan the additional PCI segment
groups and properly handle those devices.
TEST=Booted on ibm/sbp1 with multiple PCI segment groups enabled
to ubuntu 22.04.
TEST=intel/archercity CRB
Change-Id: I0ba5e426123234979d746d3bdfc1ddfbd71c3447
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79878
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
For every PCI segment group generate a new SATC header.
Allows to generate proper ACPI code when multiple PCI segment
groups are enabled.
TEST=Booted on ibm/sbp1 with multiple PCI segment groups.
Properly generates multiple SATC headers.
TEST=intel/archercity CRB
Change-Id: I93b8ee05a7e6798e034f7a5da2c6883f0ee7a0e5
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81180
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
The DMAR entries of type "PCI" have no "Enumeration ID" and thus
there's no need to print it. Drop all unused Enumeration IDs to
simplify the code and debug prints.
Document ID: Intel Virtualization Technology for Directed I/O
Architecture Specification, Rev. 4.0, Order Number: D51397-015
TEST=intel/archercity CRB
Change-Id: I009fbfb9f9d62855d351c5db2d3d88722b5dbfa2
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81186
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Convert the 'select SOC_AMD_OPENSIL_STUB' statement to a config option
and give it a prompt. This allows for internal development of openSIL
and corresponding coreboot source, and controllable using a defconfig.
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I2b48e2bbf71cd94ac7ecec13834ba36aa6c241ce
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81188
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
