sargo-temp

Temporary fixes that make Mobian work on sargo.

Please note that the MIT license does not apply to qcom-firmware.

What to do

Build Image

Instructions can be found in IMAGE.md in this repo.

Flash image

First flash the image. Boot the phone.

Connect via SSH: ssh mobian@10.66.0.1

Accept the host key.

Note: If you built the image with a different username, you will have to set that in ansible/ansible.cfg.

Roll out workarounds using Ansible

You have to have ansible-playbook installed.

Go to the Ansible folder: cd ansible

Roll out workarounds: ./workarounds.sh

Reboot phone via SSH.

Connect to wifi.

Rolling out the workarounds for audio requires installing packages from the repo, so we need an internet connection.

Roll out audio workarounds: ./audio.sh

Note:

• You might have to switch SIM slots if your SIM card is not recognised.
  • Command: mmcli -m 0 --set-primary-sim-slot=1, options are 1 or 2
  • Note that this reboots the modem, therefore it will be -m 1 and then the next time -m 2 until you reboot and this makes it go back to -m 0.
• The kernel does get updates from the repos yet, so watch the git repo to find out when there are new releases so you can compile it again and install the .deb file.
  • Feed: https://salsa.debian.org/erebion/sdm-670-linux/-/tags?format=atom
• Watch the RSS feed for this repo to learn when there is something new:
  • Feed: https://git.erebion.eu/forgejo/erebion/sargo-temp.rss

Project Status

To Do List

• Make installer images work on this device
• Have droid-juicer run on installer images
• Make sure my q6voiced package no longer includes a hard-coded config for this device
• Create an ITP for tinyalsa and q6voiced and get both into the repos (use the workarounds from this repo to get working call audio for now)
• Combine SDM670 kernel patches with those in the Mobian qcom kernel
  • Patches are already being upstreamed by the sdm670-linux project, maybe that's already done before I start working on it xD

Issues To Solve To Get Official Mobian Images

• Remove hard-coded value in the droid-juicer systemd unit (done, but not yet in repos)
  • https://gitlab.com/mobian1/droid-juicer/-/issues/4
• Combining SDM670 kernel patches with the Mobian qcom kernel (To Do List entry above, help wanted)

Done:

• New release of qcom-phone-utils required so that my patches are available from the repo
  • 4f77281197 (firmware folders)
  • 9aa29a1d0b (fixes bootimg generation with LUKS)
  • 3ddb192b5c (fixes on-screen keyboard for LUKS passphrase)

For those I will remove the workarounds once the changes are in the Mobian repo

Misc Issues

• ALSA config for the device has not been upstreamed yet (can be added using the Playbook in this repo)
• Bug in Pipewire that causes issues with the camera: https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/4227

(This is a non-exhaustive list)

Low Priority

• add udev rule for the vibration motor to the right package
• fix udev rule for the Bluetooth workaround in this repo
• create/find script/tool that brings up Bluetooth & then package it
  • for now this repo contains a simple script specific to this device and a udev rule, but something is wrong with the udev rule. Run /opt/bluetooth-mac.bash to get Bluetooth working, repeat after reboots

This Works

• booting
• display
• touch
• modem <- You might have to switch to the other slot if it does not work: mmcli -m 0 --set-primary-sim-slot=1, options are 1 or 2. Note that the modem could also be a different number, maybe try -m 1 if it is not found as the command will reboot the modem and then it changes.
• plymouth
• battery/charging
• mobile data
• wifi
• torch
• suspend
• call audio
• vibration
• Bluetooth™
• full disk encryption
• eSIM (provisioning tool not yet packaged and has to be compiled and installed manually)
• SMS (only receiving has been tested, but I don’t have reason to believe sending wouldn’t work)
• audio (ALSA config not packaged, but can be manually added using the playbook in this repo)
• camera (some sort of bug and it does not work currently, but the support is there, udev rule requird)

This Has An Unknown Status

• Fingerprint Sensor
• NFC (should work, does so on pmOS)

This Does Not Work Yet (Soon™)

• GPS
• USB host mode (no Kernel support yet, but apparently this is being worked on)
• Verified Boot (first need to do research)

This Is Missing And Will Come Later

• accelerometer
• magnetometer
• ambient light sensor
• barometer

The Sources (Use The Source, Luke)

• My efforts of packaging a device-specific kernel: https://salsa.debian.org/erebion/sdm-670-linux (which can be used for now as patches are not yet in upstream Linux)
• mobian-recipes, which is used to build images: https://salsa.debian.org/Mobian-team/mobian-recipes
• droid-juicer, which retrieves some important files, such as firmware, from some partitions: https://gitlab.com/mobian1/droid-juicer
• postmarketOS wiki: https://wiki.postmarketos.org (lovely folks, thanks for sharing everything you found out the hard way :D)

Thanks For All The Fish

Huge thanks to be sdm670-linux project and flamingradian who did and still does an awful lot of work to make sure the Kernel works on those devices! :)

I don’t know how Kernel development works, so I would have never started porting without this project.

Find that here: https://gitlab.com/sdm670-mainline/linux