# Thermal Zones and ADC stuff

Thermal zones marked as not working should work with this patch applied: https://lore.kernel.org/all/20260724-adc-tm5-drop-iio-val-int-check-v1-1-0b85a0895dd7@oss.qualcomm.com/#t

## ADC stuff

Relevant docs:

- include/dt-bindings/iio/qcom,spmi-vadc.h

### pm6150l

#### pm6150l@4

##### pm6150l_adc (adc@3100)

| downstram name       | reg  | upstream name        | need to add | added? | corresponding thermal zone | can get value from corresponding thermal zone |
| -------------------- | ---- | -------------------- | ----------- | ------ | -------------------------- | --------------------------------------------- |
| ref_gnd              | 0x00 |                      |             |        |                            |                                               |
| vref_1p25            | 0x01 |                      |             |        |                            |                                               |
| die_temp             | 0x06 |                      |             |        |                            |                                               |
| vph_pwr              | 0x83 |                      |             |        |                            |                                               |
| pa_therm2            | 0x4d | pa-therm1            | yes         | yes    | pa1-thermal                | yes                                           |
| msm_therm            | 0x4e |                      | yes         | yes    | sdm-skin-thermal           |                                               |
| pa_therm1            | 0x4f | pa-therm0            | yes         | yes    | pa0-thermal                | yes                                           |
| get_stageid_adc      | 0x52 |                      |             |        |                            |                                               |
| rfc_cam_therm        | 0x53 | rear-cam-sensor      | yes         | yes    | rear-cam-thermal           | yes                                           |
| rear_cam_flash_therm | 0x54 | rear-cam-flash-therm | yes         | yes    | rfc-flash-thermal          | yes                                           |
| quiet_therm          | 0x55 | quiet-therm          | yes         | yes    | quiet-thermal              | yes                                           |

Table complete from downstram DT: yes

##### pm6150l_adc_tm (adc-tm@3500)

compatible string: `qcom,adc-tm5`

| downstram name       | reg  | gpio  | upstream name |
| -------------------- | ---- | ----- |-------------- |
| pa-therm1            | 0x4d | n/a   |               |
| pa-therm0            | 0x4f | n/a   |               |
| rear-cam-flash-therm | 0x54 | gpio7 |     |
| quiet-therm          | 0x55 | gpio4 (should it be gpio10? is that just what downstream calls it?) |     |

Table complete from downstram DT: yes

There's no gpio10 in `include/dt-bindings/iio/qcom,spmi-vadc.h` and I'm not sure how to define it...

##### ? (adc-tm@3400)

this one is not defined in pm6150l.dtsi!

compatible string: `qcom,adc-tm5-iio`

| downstram name | reg | gpio | upstream name |
| -------------- | --- | ---- | ------------- |
| msm_therm | 0x4e | n/a |                      |
| rfc_cam_therm | 0x53 | gpio6 | rear_cam_therm |

Table complete from downstram DT: yes

#### pm6150l@5

Flash LED (added), Tri-LED (above screen, probably needs to be added), AMOLED regulator (does this need to be added?)

### pm7250b

```
&pm7250b_vbus {
       regulator-min-microamp = <500000>;
       regulator-max-microamp = <1500000>;

       status = "okay";
};
```

#### pm7250b@2

Need to find value in downstream device tree...

##### pm7250b_adc (adc@3100)

- downsteam compatible string: `qcom,spmi-adc5`
- upstream compatible string: ?

| downstram name     | reg | upstream name | need to add | added? | corresponding thermal zone | can get value from thermal zone |
| ------------------ | --- | ------------- |             |        |                            |                                 |
| ref_gnd@0          | 0x00 |              |             |        |                            |                                 |
| vref_1p25@1        | 0x01 |              |             |        |                            |                                 |
| die_temp@2         | 0x06 |              |             |        |                            |                                 |
| usb_in_i_uv@7      | 0x07 |              |             |        |                            |                                 |
| usb_in_v_div_16@8  | 0x08 |              |             |        |                            |                                 |
| chg_tmp@9          | 0x09 |              |             |        |                            |                                 |
| smb1390_therm@e    | 0x0e |              |             |        |                            |                                 |
| mid_chg_div6@1e    | 0x1e |              |             |        |                            |                                 |
| bat_therm_30k@2a   | 0x2a |              |             |        |                            |                                 |
| bat_therm@4a       | 0x4a |              |             |        |                            |                                 |
| bat_id@4b          | 0x4b |              |             |        |                            |                                 |
| charger_skin_therm | 0x4d |              | yes         | yes    | chg-skin-thermal           | yes                             |
| conn_therm         | 0x4f |              | yes         | yes    | conn-thermal               | yes                             |
| bat_therm_400k@6a  | 0x6a |              |             |        |                            |                                 |
| vph_pwr@83         | 0x83 |              |             |        |                            |                                 |
| vbat_sns@84        | 0x84 |              |             |        |                            |                                 |
| chg_sbux@99        | 0x99 |              |             |        |                            |                                 |
| v_i_int_ext@b0     | 0xb0 |              |             |        |                            |                                 |
| v_i_parallel@b0    | 0xb4 |              |             |        |                            |                                 |

Table complete from downstram DT: yes

##### pm7250b_adc_tm (adc-tm@3500)

| downstram name     | reg  | upstream name |
| ------------------ | ---- | ------------- |
| charger_skin_therm | 0x4d |               |
| conn_therm         | 0x4f |               |

Table complete from downstram DT: yes

### pm7250b@3

Downstream:

```
                        qcom,pm7250b@3 {
                                compatible = "qcom,spmi-pmic";
                                reg = <0x03 0x00>;
                                #address-cells = <0x02>;
                                #size-cells = <0x00>;

                                qcom,vibrator@5300 {
                                        compatible = "qcom,qpnp-vibrator-ldo";
                                        reg = <0x5300 0x100>;
                                        qcom,vib-ldo-volt-uv = <0x2dc6c0>;
                                        qcom,disable-overdrive;
                                        phandle = <0x307>;
                                };
                        };
```

so... this is where the vibrator is

### pm8008

#### pm8008@9

Contains regulators, downstream calls them `qcom,pm8008-regulator`

- Downstram compatible string: `qcom,pm8008-regulator`
- Upstream compatible string: ?

Regulators are: 

| downstream name | upstream name |
| --------------- | ------------ |
| pm8008_en-supply | |
| vdd_l1_l2-supply | |
| vdd_l3_l4-supply | |
| vdd_l5-supply	| |
| vdd_l6-supply	| |
| vdd_l7-supply	| |

Table complete from downstream DT: yes

### pmk8350

Also: RTC

#### pmk8350@6

##### pmk8350_adc (adc@3100)

| downstram name     | reg   | upstream name | need to add | added? | corresponding thermal zone | can get value from thermal zone |
| ------------------ | ----- | ------------- | ----------- | ------ | -------------------------- | ------------------------------- |
| ref_gnd            | 0x600 |               |             |        |                            |                                 |
| vref_1p25          | 0x601 |               |             |        |                            |                                 |
| die_temp           | 0x603 |               |             |        |                            |                                 |
| xo_therm           | 0x644 |               | yes         | yes    | xo-thermal                 | yes                             |

Table complete from downstram DT: yes

##### pmk8350_adc_tm (adc_tm@3400)

| downstram name     | reg   | gpio | upstream name | need to add | added? | corresponding thermal zone | can get value from thermal zone |
| ------------------ | ----- | ---- | ------------- | ----------- | ------ | -------------------------- | ------------------------------- |
| xo-therm           | 0x644 | n/a  |               | yes         | yes    | xo-thermal                 | yes                             |

Table complete from downstram DT: yes