Select SOC_AMD_COMMON_BLOCK_ESPI_EXTENDED_DECODE_RANGES and remove the
TODO from SOC_AMD_COMMON_BLOCK_HAS_ESPI.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I90e3bf3f196e22b428b01ea0437c1224702d2b44
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64055
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Compile-time support of DPTC is controlled by
EC_ENABLE_AMD_DPTC_SUPPORT in each variant's ec.h file. This CL removes
EC_ENABLE_AMD_DPTC_SUPPORT and replaces it with the Kconfig value
SOC_AMD_COMMON_BLOCK_ACPI_DPTC.
Each variant's run-time support of DPTC continues to be controlled by
the variant's overridetree.cb "dptc_enable" value.
BRANCH=none
BUG=b:217911928
TEST=Build zork
TEST=Boot skyrim
Signed-off-by: Tim Van Patten <timvp@google.com>
Change-Id: Ic101e74bab88e20be0cb5aaf66e4349baa1432e3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67180
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Pcie5_1 is added for DID 0xA72Dh and BDF 0/1/1.
References:
RaptorLake External Design Specification Volume 1 (640555)
BUG=b:229134437
BRANCH=firmware-brya-14505.B
TEST=Boot to OS
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: Id7440bf202d5560ff92807877d48b94054cb1de9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67108
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Add support for loading SPM firmware from CBFS to SPM SRAM. SPM needs
its own firmware to enable SPM suspend/resume function which turns off
several resources such as DRAM/mainpll/26M clk when linux system
suspend.
SPM is an essential component on MediaTek SoC, so we initialize PPM
in soc_init(). For MT8188, SPM will handshake with DPM to do
initialization, so we need to call spm_init() after dpm_init().
This SPM flow adds 33ms to the boot time.
firmware log:
mtk_init_mcu: Loaded (and reset) spm_firmware.bin in 25 msecs
SPM: spm_init done in 33 msecs, spm pc = 0x400
TEST=spm pc is 0x400 which is in idle state.
BUG=b:236331724
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I1a1f49383e0ceadc259a18272fc1c277b65406ae
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66973
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Some functions are the same in spm.c for MT8192, MT8195, MT8186 and
MT8188, so we move them to common/spm.c.
TEST=build pass.
BUG=b:236331724
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I29ddefc47d8bd156fa1ca0cedd4deaed676ae7e4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66972
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
The unit of current_clk in pmif_ulposc_check() should be MHz. We use
pmif_get_ulposc_freq_mhz() to get the default hardware value in MHz.
Without this modification, the judgement in pmif_ulposc_check() is
alway wrong due to the wrong unit.
TEST=build pass.
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I3bf80a23bb35ff657023eb4b7e009fa233f61244
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66971
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Add basic DEVAPC (device access permission control) driver.
DEVAPC driver is used to set up bus fabric security and data protection
among hardwares. DEVAPC driver groups the master hardwares into
different domains and gives secure and non-secure property. The slave
hardware can configure different access permissions for different
domains via DEVAPC driver.
1. Initialize DEVAPC.
2. Set master domain and secure side band.
3. Set default permission.
TEST=check logs of DEVAPC ok.
BUG=b:236331724
Signed-off-by: Nina Wu <nina-cm.wu@mediatek.com>
Change-Id: Iad3569bc6f8ba032d478934ba839dc4b5387bafc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66970
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Some enums and functions are the same in DEVAPC driver for MT8195,
MT8186, and MT8188, so we move them to common folder.
TEST=build pass.
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: Ia7d2145780780fd54b76952db96424b8ea477594
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67171
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Add initialization of DPM drvier for DRAM low power mode.
DPM is an essential component on MediaTek SoC, so we initialize DPM
in soc_init().
This DPM flow adds 22ms to the boot time.
coreboot logs:
CBFS: Found 'dpm.dm' @0x156c0 size 0xfc in mcache @0xfffdd110
mtk_init_mcu: Loaded (and reset) dpm.dm in 6 msecs (422 bytes)
CBFS: Found 'dpm.pm' @0x15800 size 0x3c59 in mcache @0xfffdd140
mtk_init_mcu: Loaded (and reset) dpm.pm in 16 msecs (18910 bytes)
TEST=build pass
BUG=b:236331724
Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com>
Change-Id: I46baa7b49e90d53dd4d1d95af9c46622faf30419
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66969
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
DPM is a hardware module for DRAM power management, which is used for
DRAM low power mode.
TEST=build pass
BUG=b:236331724
Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com>
Change-Id: I872396fe2c5accd92ba5c14b124125bd58257771
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66967
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
MT8195 and MT8188 share the same dpm_4ch.c, so we move it to common
folder.
TEST=build pass
BUG=b:236331724
Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com>
Change-Id: I13406707d3b331ced57af62f4ba4f365e9ac4f84
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66966
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Ths new Method, GSCI, allows control over whether or not IRQs are routed
as SCI#s for the given GPIO.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ic61caaf77d2c6e295e67a1501544e8b8fc6f3b6a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66813
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
IMHO, using bitfields directly in the Field declaration makes the ASL
code more readable then directly manipulating the entire 32-bit dword.
TEST=ACPI code using several of these Methods still works
(google/agah dGPU ACPI code)
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I9909700022d8b55db3f5208010bdff11ddaf4e7d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66812
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The CPPC table value for UEFI BIOS has been changed. The code has been
merged to AGESA. We can get the value by dumping ACPI table. Then we
align the coreboot code with the new value.
BUG=b:190420984
Change-Id: I091ab3bbc5f94961f8b366a3fa00f50f5c9fa182
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63632
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Rename pcie5 alias as pcie5_0 since raptorlake is adding a new pcie5 RC.
BRANCH=firmware-brya-14505.B
TEST=none
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: Iee669e68e3607b7ffec9f0800e9f0a916defd498
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67107
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The size of the input parameter to RESET_SYSTEM svc call is expected to
be 4 bytes. Fix the reset_system type from enum to uint32_t.
BUG=b:243476183
TEST=Build and boot to OS in Skyrim with PSP verstage. Trigger a system
reset to ensure that the system is reset successfully.
Change-Id: I6319a1dfc89602722c1c2b1c4ee744493ae8b33f
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67117
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The feature "USE_CBMEM_DRAM_INFO" is supported in MT8188. Therefore,
we select this configuration to enable it.
TEST=build pass
BUG=b:233720142
Signed-off-by: Xi Chen <xixi.chen@mediatek.com>
Change-Id: I14f3d971fe861cbd09cc86c8a5a1fb531bfe78d7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66280
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The emi.c is the same for MT8186 and MT8188, so we could move it to
the common folder and reuse it.
TEST=build pass
BUG=b:236331724
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I225f1d07c973129172f01bf7f4d7f5d5abe7c02b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66328
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Define fields of sdram_params and enable MEDIATEK_BLOB_FAST_INIT to
run fast calibration for MT8188 using blob.
DRAM fast calibration logs:
DRAM-K: Fast calibration passed in 19530 msecs
dram size (romstage): 0x200000000
TEST=Fast calibration pass.
BUG=b:233720142
Signed-off-by: Xi Chen <xixi.chen@mediatek.com>
Change-Id: I2468d971fe861cbd09cc86c8a5a1fb531bfe78d7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66279
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
- Use common SoC drivers for DRAM calibration support.
- Remove emi.h because sdram_size() is already declared in
common/include/soc/emi.h.
- Add dramc_param.h and dramc_soc.h to prepare for implementation of
DRAM full calibration.
TEST=build pass
BUG=b:233720142
Signed-off-by: Xi Chen <xixi.chen@mediatek.com>
Change-Id: I2f88d971fe861cbd09cc86c8a5a1fb531bfe78d7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66277
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
This patch runs `set_tme_core_activate()` on all CPUs (BSP+APs) as
per MTL processor EDS.
TEST= Able to build and boot RVP.
Confirmed TME supported mode detected via temporary debug prints and MSR 0x9ff indicates activated.
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Change-Id: Id368925504d81025239e94698d2cb0e2266a5a96
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66949
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change provides access to IOE through P2SB Sideband interface for
Meteor Lake TCSS functions of pad configuration and Thunderbolt
authentication. There is a policy of locking the P2SB access at the end
of platform initialization. The tbt_authentication is read from IOM
register through IOE P2SB at early silicon initialization phase and its
usage is deferred to usb4 driver.
BUG=b:213574324
TEST=Built coreboot and validated booting to OS successfully on MTLRVP
board. No boot hung was observed.
Signed-off-by: John Zhao <john.zhao@intel.com>
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I8dcee90080c6e70dadc011cc1dbef3659fdbc8f7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66951
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch refactors p2sb_execute_sideband_access() to be able to
handle SBI operations in both SMM and non-SMM scenarios.
Prior to FSP-S operation being done, the IOE P2SB device will be
visible on the PCI bus hence, performing the SBI operation using IOE
P2SB doesn't involve unhide/hide operation.
Post FSP-S, the IOE P2SB device is hidden.
Additionally, SBI operations can't be performed as is. The only
possible way to send SBI is inside SMM mode and to do that, coreboot
needs to unhide the P2SB device prior to sending the SBI and hide
it post sending SBI.
As a result, the p2sb_execute_sideband_access() function has been
refactored to manage these cases seamlessly without users of the
p2sb_execute_sideband_access() actually being bothered about the
calling mode.
BUG=b:239806774
TEST=Able to perform p2sb_execute_sideband_access() function call in
both SMM and non-SMM mode without any hang/die.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Iafebd5190deb50fd95382f17bf0248fcbfb23cb8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66950
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Only 16 MByte of the SPI flash can be mapped right below the 4 GB
boundary.
In case of a larger SPI flash size, still only the 16 MByte region
starting at 0xff000000 can be configured as WRPROT and be reserved for
the MMIO mapped SPI flash region. The next 16 MByte MMIO region starting
at address 0xfe000000 contain for example the LAPIC MMIO region, the
ACPIMMIO region and the UART/I2C controller MMIO regions which shouldn't
be configured as WRPROT. Reserving this region for the MMIO mapped SPI
flash would also result in an overlap with the MMIO resources mentioned
above.
In the case of a smaller SPI flash, reserving the full 16 MByte flash
MMIO region makes sure that the resource allocator won't try to put
anything else in the lower parts of the 16 MByte SPI mapping region.
To avoid the issues described above, always reserve/cache the maximum
amount of 16 MBytes of flash that can be mapped below 4 GB.
TEST=On boards with 16 MByte SPI flash chips, the resulting image of a
timeless build doesn't change with this patch. Verified this on Chausie
(Mendocino), Majolica (Cezanne), Cereme (Picasso) and Google/Careena
(Stoneyridge). On Mandolin (Picasso) with an 8 MByte flash, the
resulting image of a timeless build is different, but neither the
coreboot console output nor the Linux dmesg output shows any errors that
might be related to this change.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie12bd48e48e267a84dc494f67e8e0c7a4a01a320
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66700
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Hook up Lp5CccConfig FSP UPD for Intel MeteorLake.
BUG=b:243734885
TEST=Built and booted on Google Rex. Verified the UPD value in MRC log.
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I3d7ff8e08546f06cf7807ee825cfef84c14a6c5d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67052
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Maulik Vaghela <maulikvaghela@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Hook up ECT FSP UPD for Intel MeteorLake.
BUG=b:243734885
TEST=Built and booted on Google Rex. Verified the UPD value in MRC log.
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: Idc23717c3ce52e3635e2da41733058f912545e5f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67051
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maulik Vaghela <maulikvaghela@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
This patch resolves the SoC programming dependency order where enabling
extended bios support requires MCHBASE to be enabled.
BUG=b:243693375
TEST=Able to boot from RW-A slot which is mapped to extended BIOS range.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I8bd9c3d3fb5e82e34f2d6af8548452c744d4b3c5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67046
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Voltage set based on standard configuration for each type.
TEST=build/boot google/skyrim, verify output in cbmem console log,
DMI type 17 table.
Change-Id: I9b1e68a9417e43cbb9c55b4c471664f3f9090342
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66981
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Since the frequency field is deprecated, print the max/configured MT/s
speeds instead.
TEST=build/boot google/skyrim, verify output in cbmem console log
Change-Id: Icee5af762ca37c3b2ec8c9a52a7f32fb848390b0
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66980
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Hook up newly-added method to convert from frequency to MT/s so that
boards which use (LP)DDR5 report their capability properly.
BUG=b:239000826
TEST=build/boot google/skyrim, verify SMBIOS Type 17 table reports
DRAM speeds correctly.
Change-Id: I694b6c227a8d8fb40c897053808bc79df330ed0c
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66954
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
This patch brings INTEL_TME config check prior programming
TME Set Activation Core MSR on all cores.
TEST=Able to boot Google/Taeko to OS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I8af7e305da1050f443929ab33be556e713e53e9a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66976
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
BIOS must send the IP_LOAD HECI command to fetch the firmware for CPU
PCIe Gen5 and upload it via CPU REG BAR prior FSP Silicon Init.
Implementation based on public Slimbootloader's
"Silicon/AlderlakePkg/Library/CpuPcieHsPhyInitLib".
TEST=Boot MSI PRO Z690-A and see the HSPHY FW is loaded.
PCIe x16 Gen3 GPU card started working in the PCIE 5.0 slot.
[DEBUG] HECI: Sending Get IP firmware command
[DEBUG] HECI: Get IP firmware success. Response:
[DEBUG] Payload size = 0x6944
[DEBUG] Hash type used for signing payload = 0x3
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I6c6c11581e3d3d9bab0131fae6ef487cafe98080
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64074
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This enables SOC_INTEL_COMMON_BLOCK_GPIO_PMODE_4BITS to support 4 bits
GPIO pad mode to configure native function 8 to 15.
BUG=b:239690757
TEST=build and verify pad mode configuration with Meteor Lake mtlrvp
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Change-Id: Ibf4b13a3d19095d15bf857c7fe4ec0affb54a4e8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66391
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Intel GPIO pad supports 4 bits pad mode, PAD_CFG_DW0[13:10] for pins
that native function 8 to 15 is assigned. This adds native function
definitions from NF8 to NF15 and updates PAD_CFG0_MODE_MASK to support
4 bits pad mode configuration.
Since PAD_CFG_DW0[16:13] is reserved for pins that NF8 or higher is not
assigned, this change would not cause an issue but Kconfig option is
added to minimize an impact and support 4 bits pad mode configuration.
BUG=b:239690757
TEST=build and verify pad mode configuration with Meteor Lake mtlrvp
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Change-Id: Iefd2daa92a86402f2154de2a013ea30f95d98108
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66375
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
This patch runs `set_tme_core_activate()` on all CPUs (BSP+APs) as
per Alder Lake Processor EDS.
TEST= Able to build and boot Google/Redrix.
Dumping MSR 0x9FF on all logical processors shows zero value being
set.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I130480d4fba413d47d0d0137932ec1fb041a88d8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66753
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch implements API to program TME core activation MSR 0x9FF.
Write zero to TME core activate MSR will translate the
TME_ACTIVATE[MK_TME_KEYID_BITS] value into PMH mask register.
Note: TME_ACTIVATE[MK_TME_KEYID_BITS] = MSR 0x982 Bits[32-35]
TEST=Able to build and boot Google/Redrix.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I48cf8e255b294828ac683ab96eb61ad86578e852
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66752
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
This patch removes the static kconfig being used to fill in TME enable
FSP UPD. Instead use`is_tme_supported()` and `CONFIG(INTEL_TME)` to check
if the CPU has required TME support rather than hardcoding.
TEST=FSP debug log shows `TmeEnable` UPD is set appropriately for the
TME-supported CPU SKUs.
As per FSP-M debug log:
Without this CL, Alder Lake-P CPU SKU without TME support:
[SPEW ] TmeEnable = 0x1
With this CL, Alder Lake-P CPU SKU without TME support:
[SPEW ] TmeEnable = 0x0
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I8aa2922baaf2a49e6e2762d31eaffa7bdcd43b0a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66750
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
As per the Alder Lake FAS coreboot shall detect the existence of TME
feature by running the CPUID instruction:
CPUID leaf 7/sub-leaf 0
Return Value in ECX [bit 13]=1
If TME is supported then only access to TME MSRs are allowed otherwise
accessing those MSRs would result in GP#.
TEST=Able to detect the existence of TME feature across different
Alder Lake and Meteor Lake CPU SKUs.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ibd4fcf15a66d27748ac7fbb52b18d7264b901cd8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66749
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
The `INTEL_TME` Kconfig option has a prompt, which means it is meant to
be user-configurable. However, it has been selected from Alder Lake and
Meteor Lake Kconfig, so `INTEL_TME` cannot be disabled on them. Replace
the `select INTEL_TME` statements with default values in order for this
option to be user-configurable on all platforms that support it.
Change-Id: Ib37c108fcc1004840b82be18fd23c340a68ca748
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66756
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
smn_read32 is used in this file, so include the header file with the
function prototype so that the file compiles successfully.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5bef96cd08f22b3475e8b5ba4e984a6e1ab4da36
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66913
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Since the I2C controller is part of the FCH, move the early
initialization from bootblock.c to early_fch.c which also matches what
the newer AMD SoCs do.
TEST=Successfully boots on google/liara and all I2C/cr50/TPM functions
appear to work properly
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I22d3a8888eaa34ea612da719c408c0083769e806
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66866
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The functionality of sb_enable_lpc is implemented in the common LPC
support code as lpc_enable_controller. This gets called by the common
lpc_early_init which also calls lpc_disable_decodes and lpc_set_spibase.
The lpc_set_spibase call was already done in bootblock_fch_early_init,
so the main change in code behavior is that now lpc_disable_decodes gets
called during early FCH initialization. The lpc_enable_port80 and
sb_lpc_decode calls after the lpc_early_init code will reenable some of
the decodes.
TEST=Successfully boots on google/liara, cbmem and dmesg logs look clean
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia58a6f609fa149a6c09ed99f08bdc4f05eb56f96
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66841
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The PCI config space of the SMBus device has a secondary mapping as an
ACPIMMIO bank. Since the PCI device is on bus 0, it's already available
early in boot after the enable_pci_mmconf call, so there's no need to
use the ACPIMMIO mapping instead of the PCI config space mapping.
Verstage on PSP could theoretically access the PCI config space via the
0xcf8/0xcfc register pair, but since verstage on PSP doesn't have the
ACPIMMIO mapping anyway, we won't loose any functionality here.
Change-Id: I5c8ce8de0a6ab0ed41e7e8a5980d0f0510aaa993
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42685
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
