Currently there are 3 GDTs (Global Descriptor Tables) being used on x86:
- preRAM (gdt_init.S)
- SMM (smm_stub.S)
- RAM (c_start.S)
They have different layouts and thus different offsets for the segments
being used in assembly code. Stop using different GDT segments and
ensure that for ROM (preRAM + SMM) and RAM (ramstage) the segments
match. RAM will have additional entries, not found in pre RAM GDT,
but the segments for protected mode and 64-bit mode now match in
all stages.
This allows to use the same defines in all stages. It also drops the
need to know in which stage the code is compiled and it's no longer
necessary to switch the code segment between stages.
While at it fix the comments in the ramstage GDT and drop unused
declarations from header files, always set the accessed bit and drop
GDT_CODE_ACPI_SEG.
Change-Id: I208496e6e4cc82833636f4f42503b44b0d702b9e
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/87255
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Add an exception handler to SMM to debug crashes when a serial
console is enabled and DEBUG_SMI is set. This allows for narrowing
down issues faster than letting the machine triple fault.
Change-Id: I2ccaf8d23d508d773ce56912983884ad6832ede6
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/87208
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
I found duplicated code masking stack pointer.
So, i'd like to remove the duplicate for refactoring :-).
This is my build output of c_start.o, before vs after modifying.
before modifying
...
44: f3 ab rep stos %eax,%es:(%edi)
46: bc 00 00 00 00 mov $0x0,%esp
4b: 83 e4 f0 and $0xfffffff0,%esp
4e: b0 6e mov $0x6e,%al
50: e6 80 out %al,$0x80
52: 83 e4 f0 and $0xfffffff0,%esp // deleted.
55: e8 fc ff ff ff call 56 <_start+0x56>
...
after modifying
...
44: f3 ab rep stos %eax,%es:(%edi)
46: bc 00 00 00 00 mov $0x0,%esp
4b: 83 e4 f0 and $0xfffffff0,%esp
4e: b0 6e mov $0x6e,%al
50: e6 80 out %al,$0x80
52: e8 fc ff ff ff call 53 <_start+0x53>
...
P.S. it is commits which introduced duplication.
32bit : 4d75dbd1c1
64bit : 1c4c7ad1e5
Change-Id: I417ce90279fea4b00432e6a209f77a6dd0c0fee6
Signed-off-by: NyeonWoo Kim <knw0507@naver.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/87181
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Now that we require the FMAP to start at offset 0 in the flash, we can
assume this across the entire codebase and therefore simplify it on
several ends.
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: Ieb1a23f9c0ae8c0e1c91287d7eb6f7f0abbf0c2c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/86771
Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Stop using magic values and use defines for Global Descriptor Table
(GDT) offsets. Use the existing defines from the corresponding headers.
Change-Id: I40c15f6341bdef9cd457619ec81e7ac624ec2d63
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/87254
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
FMAP should not contain information about the memory map.
Done with the following command:
"find -name \*.fmd -exec sed -i 's/\(FLASH\).* \(.*\) /\1 \2 /' {} \;"
for AMD:
All addresses that amdfwtool expects as command line parameter have the
ADDR_REL_BIOS (flash address) address_mode setting. One exception is
the *_FW_A_POSITION and *_FW_B_POSITION addresses. But amdfwtool checks
if memory or flash addresses are passed and converts accordingly. So
changing the address from memory -> flash doesn't matter for the
resulting binary.
Since commit 41a162b7a8 ("soc/amd/phoenix/Makefile.inc: Pass APOB_NV
address as offset") and therefore since phoenix SOC, APOB_NV is passed
as flash offset. But before that the memory ABL always assumed a MMIO
address (no matter the address_mode) so we need to add a little quirk
for that.
tested: boot glinda based mainboard and also check that memory training
is still cached successfully in APOB_NV.
Change-Id: Iac86ef9be6b14817a65bf3a7ccb624d205ca3f99
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63771
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Consider special requirements for computing cache size in certain SoCs,
such as `soc/amd/glinda`.
Use the helper function to implement SoC-specific logic for computing
cache size.
Change-Id: I60707de4c8242a8fbda8cb5b791a1db762d94449
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/85638
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Currently all platforms on RISC-V require a FDT.
The inclusion of the FDT is currently done in the platform Makefiles.
In order to factor out some common code this patch adds the inclusion
in the architecture Makefile. The FDT must be aligned to 8 byte
according to device tree spec. It avoids misaligned access.
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I3b304a89646fe84c98e9f199f315bebb156de16c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83848
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
The upstream arm-trusted-firmware has removed the DISABLE_PEDANTIC
option in Commit 79eb1aff7850 ("Remove DISABLE_PEDANTIC build option").
Therefore, drop the option for BL31.
Change-Id: Iaca07ce190c566fe79814fd8bbd8821d3ea76955
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/86263
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
As suggested by the linter:
Prefer 'unsigned long' over 'unsigned long int' as the int is unnecessary
Link: https://qa.coreboot.org/job/coreboot-untested-files/lastSuccessfulBuild/artifact/lint.txt
Cc: "Jérémy Compostella" <jeremy.compostella@intel.com>
Change-Id: Ida1de23830b0b67ab7fac635b02a4e99c65746f8
Signed-off-by: Ariel Otilibili <otilibil@eurecom.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/85782
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Disable the debug code as there were unexplainable stack corruptions
detected on some platforms.
No problems were observed on:
- QEMU
- Xeon-SP
Change-Id: I1f1b9f01af7fbb0c19becf6ea53d436898584c5e
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/85594
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Match function name "init" with "remove" by renaming all
*_breakpoint_disable() to *_breakpoint_remove().
Change-Id: Id3da25cfa6fc0594887f3112e269e57e8ecb32b3
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/85540
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In order to debug stack smashing add a write breakpoint to the
stack canary (at _stack or _car_stack) and print the IP when the
stack canary is written.
TEST: Wrote to address _stack in ramstage and got the EIP of the
code that smashed the stack canary.
Change-Id: I8adf07a8425856795a4a71da5c41bec2244b02a8
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84833
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
On platforms with multiple IOAPICs the GSI base must not be
linear, which is currently assumed by acpi_create_madt_ioapic_from_hw().
Integrate the existing struct device DEVICE_PATH_IOAPIC type and allow
to assign custom GSI bases for each IOAPIC. Write out the IOAPIC devices
into the MADT table if any.
For now, since no platform adds IOAPIC devices, the existing behaviour
remains the same. Allows to get rid of soc_get_ioapic_info().
Change-Id: Ie13d4f5c4f0704f0935974f90e5b7cf24e94aab3
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/85226
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
These header files do not seem to be used in coreboot. Presumably
they're left over after the code that used them was removed.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ide70239c7c2e93fff548d989735450396308c62b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/85370
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Currently only a fixed number of harts/cores can be detected.
This patch adds a Kconfig option which allows to detect the number of
harts at runtime if a SOC or mainboard has a scheme to do so.
As part of that patch SMP logic has been mostly moved to smp_resume,
since it is easier to debug issues at the time smp_resume is called
than it is at smp_pause, since the serial is usually not present at the
time of the first smp_pause call.
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: Icc53185991fed4dbed032a52e51ff71d085ad587
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81082
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Alicja Michalska <ahplka19@gmail.com>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
The reasoning is that even though vendors currently tend to open source
their OpenSBI implementation, they often do so in their own repository.
So instead of adding all possible source repositories as submodules, we
shall allow specifying a path to an already compiled OpenSBI ELF file.
This is similar of what we currently do on ARM64 with the BL31 binary.
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I6592ad90a254ca4ac9a6cee89404ad49274f0dea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83284
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Alicja Michalska <ahplka19@gmail.com>
Reviewed-by: ron minnich <rminnich@gmail.com>
HPET General Capabilities and ID Register at offset 0x0 and Timer 0
Configuration and Capability Register at offset 0x100 are used to
determine the generation of HPET ACPI tables. This patch adds
macro definitions for these registers and fields. Definitions are
from IA-PC HPET (High Precision Event Timers) Specification Revision
1.0a.
Change-Id: I31413afcbfc42307e3ad3f99d75f33f87092d7aa
Signed-off-by: Yuchi Chen <yuchi.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84252
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
For more than 2 years the option has been unconfigurable.
Since no one seems to have fixed that, the options seems to be
not needed by anyone. So instead of making it configurable now,
we can just as well remove it.
Change-Id: I4055d497c7c23e148d2a09f216c7b910a9b3ea9b
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83934
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
For platforms without writable PAM-F segment support (e.g. some
simics virtual platforms), put ROM table pointers (e.g. ACPI/SMBIOS
low pointers) into EBDA.
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Signed-off-by: Gang Chen <gang.c.chen@intel.com>
Signed-off-by: Jincheng Li <jincheng.li@intel.com>
Change-Id: I2aac74708279813f9a848044d470fdc980ea4305
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84322
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
QEMU aarch64 boots to payload when compiled with clang.
Change-Id: I940a1ccf5cc4ec7bed5b6c8be92fc47922e1e747
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74501
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
EBDA (Extended BIOS Data Area) is a memory area below 0xA0000 and
one of the default areas where OS will scan ACPI RSDP pointer from.
coreboot's default EBDA's starting address is 0xF6000, which is in
PAM (Programmable Attribute Map) F-segment's scope. For some platforms
without writeable PAM-F segment (e.g. some simics virtual platforms),
corboot's default EBDA is not writable.
Make DEFAULT_EBDA_LOWMEM, DEFAULT_EBDA_SEGMENT, DEFAULT_EBDA_SIZE
as Kconfig items so that coreboot's EBDA could be relocated to a
writable low memory place.
Change-Id: Icd7ba0c902560f7d498934392685dc2af9c5ce09
Signed-off-by: Gang Chen <gang.c.chen@intel.com>
Co-authored-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84321
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
The fspm_rc_heap is already accounted for inside .car.data. Some linkers
like LLD do not like overlapping regions so remove this.
Change-Id: I058bd6790afc313e06f1888e5b783d97b7e93b1e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84048
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
The underlying IMD function already returns an integer which indicates
success or failure.
This removes the need to have initialized variables that need to be
checked for NULL later. In some cases this actually adds the appropriate
check for returned values.
Dying is appropriate if cbmem is not found as it is essential to the
bootflow.
Change-Id: Ib3e09a75380faf9f533601368993261f042422ef
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84039
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Some targets cannot be supported by clang as clang generates slightly
larger binaries which the hardware won't accept. This is usually the
case with CONFIG_CHROMEOS.
Change-Id: I88cf8ce16fb6c61c19d615e396f5871179b06fc8
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69747
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
A few differences with the original link targets:
- 'libs' is now supported on all arch even though only x86 uses it
- compiler_rt is included on arch that previously did not (arm). This
however has no impact as there compiler_rt is not defined for those
arch in xcompile
- LIBGCC_FILE_NAME_bootblock is not included, but this was not defined
anywhere so this is a noop
Change-Id: I64f7686894c99732d06972e7ba327061db6d7c44
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83574
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This removes the boilerplate --oformat out of the makefile.mk
Change-Id: Ib78934fff4a31c4375da2038efca5027b813b07b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83999
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Previously RAM probing was necessary for our QEMU-RISCV target in order
to find the available amount of memory.
Now we get the memory from the devicetree propagated by QEMU, so there
is no reason to keep it anymore.
Tested:
Start QEMU-RISCV and cause an exception to make sure the trap handler
still works.
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I9b1e0dc78fc2a66d6085fe99a71245ff46f8e63c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83873
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
For easier debugging it is useful to have a function that prints the PMP
regions.
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I6ab1531c65b14690e37aecf57ff441bf22db1ce5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83283
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: ron minnich <rminnich@gmail.com>
Since most targets support clang it's easier to reverse the semantics of
the Kconfig options.
Change-Id: Ib28e7a4cb286b9f8b05be94dae3947179f43c746
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81659
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Currently we use "%p" to print the address, which results in different
string lengths, depending on the value of the address. To improve
readability of the printed addresses in the log, change the format to
"0x%013lx", so that the length of the printed addresses will be
consistent.
In addition, print the level of the translation table when setting up a
new table.
Example log:
Backing address range [0x0000000000000:0x1000000000000) with new L0 ...
Mapping address range [0x0000000000000:0x0000200000000) as ...
Backing address range [0x0000000000000:0x0008000000000) with new L1 ...
Mapping address range [0x0000000100000:0x0000000130000) as ...
Backing address range [0x0000000000000:0x0000040000000) with new L2
Backing address range [0x0000000000000:0x0000000200000) with new L3
Mapping address range [0x0000000107000:0x0000000108000) as ...
Mapping address range [0x0000000200000:0x0000000300000) as ...
Backing address range [0x0000000000000:0x0000000200000) with new L3 ...
BUG=none
TEST=emerge-geralt coreboot
BRANCH=none
Change-Id: Ib29c201e1b096b9c7cd750d2541923616bc858ac
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83652
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Also take the chance to sort the headers.
BUG=none
TEST=none
BRANCH=none
Change-Id: I9d487a40d0c58c6458b8b7d32b6401093fa417e7
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83651
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Currently we include a header file from the opensbi submodule.
That causes some issues, since we merge outside code with our own.
Most recently there have been made attempts to make the coreboot
codebase C23 ready. The code that we include from opensbi however causes
the build to fail, since it is not C23 ready.
This patch effectivily detaches the coreboot codebase from the opensbi
codebase and just copies the structure and definitions that we need from
opensbi into coreboot.
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I9d8f85ee805bbbf2627ef419685440b37c15f906
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83641
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
No assembly.inc file is being generated by romcc anymore.
The -I. was only used in a single place that can use the common -Isrc
instead.
Change-Id: I57a3a6e1c2cf7cf30fb0cd94cc8455f715050490
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83563
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
There is no difference in how early and later stages are linked so
rename the same function.
Change-Id: I458c7c6822b310847e7ab32519fd8d66a90f88f7
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83562
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
We only use the bfd linker currently but partial linking is not
supported by other linkers and is also a problem for LTO.
Change-Id: I3b23d86e604229262d7c762e23bb963a0e944b5d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71910
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add a new Kconfig option ARM64_BL31_OPTEE_WITH_SMC to control whether to
build the OP-TEE dispatcher for BL31. This config also enables the BL31
build option OPTEE_ALLOW_SMC_LOAD, which allows loading the OP-TEE image
after boot via a Secure Monitor Call (SMC). For ChromeOS devices,
CROS_WIDEVINE_SMC is also enabled to allow passing secrets from firmware
to OP-TEE.
BUG=b:347851571
TEST=emerge-geralt coreboot
BRANCH=geralt
Change-Id: I4dcf82d47b537146d71ce3cd2050ec597ed0734f
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83111
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
The word "experimental" has been removed from the help text for
HAVE_X86_64_SUPPORT Kconfig. This is because the x86_64 architecture
has now been officially tested and enabled for several x86 SoC
platforms.
This work will provide us with the foundation we need to begin working
with Intel's next-generation SoC platform (which requires to support
64-bit mode of booting by default).
Therefore, we can now remove the word "experimental" from the
"HAVE_X86_64_SUPPORT" Kconfig help text.
TEST=Able to build and boot google/rex64 in 64-bit mode to ChromeOS.
Change-Id: Ibd629f4e2722f3cbabbe297d4481790c9fa9226a
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83009
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The QEMU Bochs display driver and the QEMU Firmware Configuration
interface code (in the qemu-i440fx mainboard dir) were written for x86.
These devices are available in QEMU VMs of other architectures as well,
so we want to port them to be independent from x86.
The main problem is that the drivers use x86 port I/O functions to
communicate with devices over PCI I/O space. These are currently not
available for ARM* and RISC-V, although it is often still possible to
access PCI I/O ports over MMIO through a translator.
Add implementations of port I/O functions that work with PCI I/O space
on these architectures as well, assuming there is such a translator at a
known address configured at build-time.
Change-Id: If7d9177283e8c692088ba8e30d6dfe52623c8cb9
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80372
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
ARM SoC supports FEAT_CCIDX after ARMv8.3. The register field
description of CCSIDR_EL1 is different when FEAT_CCIDX is implemented.
If numsets and associativity from CCSIDR_EL1 are not correct, the system
would hang during mmu_disable().
Rather than assuming that FEAT_CCIDX is not implemented, this patch
adds a check to dcache_apply_all to use the right register format.
Reference:
- https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/12770
BUG=b:317015456
TEST=mmu_disable works on the FEAT_CCIDX supported SoC.
TEST=manually add mmu_disable to emulation/qemu-aarch64/bootblock.c and
verify with the command
qemu-system-aarch64 -bios \
./coreboot-builds/EMULATION_QEMU_AARCH64/coreboot.rom -M \
virt,secure=on,virtualization=on -cpu max -cpu cortex-a710 \
-nographic -m 8192M
Change-Id: Ieadd0d9dfb8911039b3d36c9419af4ae04ed814c
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82635
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
<stdio.h> header is used for input/output operations (such as printf,
scanf, fopen, etc.). Although some input/output functions can manipulate
strings, they do not need to directly include <string.h> because they
are declared independently.
Change-Id: Ibe2a4ff6f68843a6d99cfdfe182cf2dd922802aa
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82665
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
