According to https://uefi.org/specs/ACPI/6.4/04_ACPI_Hardware_Specification/ACPI_Hardware_Specification.html#pm1-event-grouping
> For ACPI/legacy systems, when transitioning from the legacy to the G0
> working state this register is cleared by platform firmware prior to
> setting the SCI_EN bit (and thus passing control to OSPM). For ACPI
> only platforms (where SCI_EN is always set), when transitioning from
> either the mechanical off (G3) or soft-off state to the G0 working
> state this register is cleared prior to entering the G0 working state.
This means we don't want to clear the PM1 register on resume. By
clearing it the linux kernel can't correctly increment the wake count
when the power button is pressed. The AMD platforms implement the _SWS
ACPI methods, but the linux kernel doesn't actually use these methods.
BUG=b:172021431
TEST=suspend zork and push power button and verify power button
wake_count increments. Verified other wake sources still work.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Iaa886540d90f4751d14837c1485ef50ceca48561
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59929
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Stoneyridge selects ARCH_X86 unconditionally and all coreboot code will
run on the x86 cores. On Picasso and later, the Chromebooks run verstage
on the PSP which is an ARM V7 core which needs some special handling
cases in the code, but this doesn't apply to Stoneyridge.
TEST=Timeless build results in an identical image for Google/Careena.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I013efd13b56c0191af034a8c4b58e9b26a31c6e9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59960
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
According to https://uefi.org/specs/ACPI/6.4/16_Waking_and_Sleeping/sleeping-states.html?highlight=power%20states#
> For ACPI/legacy systems, when transitioning from the legacy to the G0
> working state this register is cleared by platform firmware prior to
> setting the SCI_EN bit.
This change makes sure we clear the PM/GPE blocks are cleared before
enabling the SCI_EN bit.
BUG=b:172021431
TEST=Boot guybrush and morphius to OS and verify suspend resume still
works.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Icc6f542185dc520f8d181423961b74481c0b5506
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59928
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
In ec/google/chromeec: Add PLD to EC conn in ACPI table(667471b8d807da5a5a9277db47e069ad3b1351c7), PLD is added to ACPI table. It causes the DUT to not boot into the OS. So fix the USB3/USB2 Type-C Port C2 PLD group order from 3 to 2 to solve this issue.
BUG=b:209568644
BRANCH=none
TEST=build coreboot and system boot into OS.
Signed-off-by: Scott Chao <scott_chao@wistron.corp-partner.google.com>
Change-Id: If5ce6ca061d9d56ba0bbb1f157b2ba278d3fa9c3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59953
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use a read modify write sequence when setting the SPI_USE_SPI100 bit in
the SPI100_ENABLE register. This avoids clearing other bits in the
register which might cause instabilities. Haven't checked the reference
code, but the register descriptions suggested that the register in
Mullins behaves similar to the one in Stoneyridge. Right now this code
is unused, but it's probably still a good idea to fix it.
TEST=Booting Debian 11 with kernel 5.10 on apu2 still works when adding
a call to hudson_set_spi100 with this patch applied.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ifbd960a9509542b28f03326a3066995540260bef
Tested-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59934
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Use a read modify write sequence when setting the SPI_USE_SPI100 bit in
the SPI100_ENABLE register. This avoids clearing other bits in the
register which might cause instabilities of the SPI interface. The
reference code for Stoneyrige also only sets the SPI_USE_SPI100 bit and
doesn't zero out the other bits.
TEST=None
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4d32fc2084bb34ea57924bae68511c6836587790
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59933
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Use a read modify write sequence when setting the SPI_USE_SPI100 bit in
the SPI100_ENABLE register. This avoids clearing other bits in the
register which might cause instabilities of the SPI interface. The
reference code for both Picasso and Cezanne also only sets the
SPI_USE_SPI100 bit and doesn't zero out the other bits.
TEST=Verified that Mandolin still boots. It didn't show any signs of
possibly related instabilities before though, so this test doesn't say
much.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I71c2ec1729d5cb4cdff6444b637af29caaa6f1c0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59932
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
commit 90ac882a32 (soc/amd/common/block/
spi: introduce SOC_AMD_COMMON_BLOCK_SPI_4DW_BURST) introduced a Kconfig
option to enable/disable the 4DW burst support in the SPI flash data
prefetcher, but missed to update the documentation above the
fch_spi_early_init prototype, so update the outdated documentation now.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I07c4b0b02251da63d34a172e2636894e99845d6b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59931
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Disable SMM_ASEG and select NO_SMM since the platforms do not use SMM.
TEST=Boot Debian 11 on PC Engines apu3
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Change-Id: I47237421c3dd5bd043447831263d72c9956cdaf4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59810
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Current log2_ceil(x) is defined as log2(x * 2 - 1). When x is larger
than (1 << 31), (x * 2 - 1) won't fit in u32, leading to incorrect
result. Therefore, correct it as (log2(x - 1) + 1). Also add unit tests
for inline functions in lib.h.
BUG=none
TEST=make tests/lib/lib-test
BRANCH=none
Change-Id: If868f793b909a6ad7fc48a7affac15e2c714fa2e
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59834
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
These functions can't be weak, because they actually need to configure
the GPIOs for eSPI and the TPM. With this change zork boots again.
I also noticed that zork doesn't use the early table in bootblock. This
means that zork will only boot if psp_verstage is enabled.
BUG=b:209465425
TEST=boot zork to ramstage
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I384fd578efe7da0a3d74829cccf38c3ed524f130
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59922
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Use KiB and MiB instead of multiplying/dividing with/by the numeric
value when doing region size calculations.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I56c380190b11aa3214cce31b82974327e3d15000
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59936
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Remove global variables `sblink` and `node_nums` and add function
`get_node_nums()` which reads from PCI config once and returns a static
variable.
TEST=Boot Debian 11 on PC Engines apu3
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Change-Id: I20a47f967093ef91355377c164656cabadc30fe6
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59870
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Add a list of gpios to lock for brya. This currently includes
GPIOs connected to the FPMCU.
BUG=b:201430600
TEST='emerge-brya coreboot chromeos-bootimage', flash and verify that
brya0 boots successfully to kernel.
Change-Id: Idea42a58575c280be0770d38f934acdf5508c45d
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58353
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This change supplies a list of ADL gpios that are connected to non-host
(x86) controllers and should be locked after initial configuration.
Set SOC_INTEL_COMMON_BLOCK_SMM_LOCK_GPIO_PADS to enable GPIO locking.
BUG=b:210430600
TEST='emerge-brya coreboot chromeos-bootimage', flash and verify that
brya0 boots successfully to kernel.
Change-Id: I457bab39f945ab31a89542c6498a73af70cbf9ee
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58352
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
For added security, there are some gpios that an SoC will want to lock
once initially configured, such as gpios attached to non-host (x86)
controllers, so that they can't be recofigured at a later point in
time by rogue code.
Likewise, a mainboard may have some gpios connected to secure busses
and/or devices that they want to protect from being changed post
initial configuration.
This change adds a generic gpio locking mechanism that allows the SoC
to export a list of GPIOs to be locked down and allows the mainboard
to export a list of GPIOs that it wants locked down once
initialization is complete.
Use the SOC_INTEL_COMMON_BLOCK_SMM_LOCK_GPIO_PADS Kconfig option to
enable this feature.
BUG=b:201430600
TEST='emerge-brya coreboot chromeos-bootimage', flash and verify
brya0 boots successfully to kernel.
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Change-Id: I42979fb89567d8bcd9392da4fb8c4113ef427b14
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58351
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
We only have ADL-P 6+8+2 (45W) VR configuration now. Based on the
power map, fill in correct ADL-P 6+8+2 (28W) VR configuration.
BUG=b:202486131
TEST=Build and check fsp log to confirm the settings are set properly.
Signed-off-by: Curtis Chen <curtis.chen@intel.com>
Change-Id: Ie8dbd95b2d8e49b5898b2a97aff72e0e64868c8b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59736
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Add Alder Lake-N case for adl_cpu_type and get_supported_lpm_mask.
Signed-off-by: Usha P <usha.p@intel.com>
Change-Id: If2917ac356fd80f84bcaf70ed710d329e77f7a6d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59836
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Disable LEGACY_SMP_INIT to enable PARALLEL_MP.
Also remove a large amount of APIC code that is now unnecessary.
TEST=Boot on PC Engines apu3
Boot time reduced from 1.707 seconds to 1.620 seconds average across
5 coldboots.
Inspired by CB:59693
Change-Id: Ib49e7d3f5956ac7831664d50db5f233b70aa54db
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59808
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
With CPU_INFO_V2 enabled %gs holds the pointer to the cpu_info struct,
so don't clobber it. Backup and restore %gs where possible.
Fixes a crash in MPinit seen after calling FSP-S.
Change-Id: If9fc999b34530de5d8b6ad27b9af25fc552e9420
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59764
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This patch removes all remaining pieces of the old CBFS API, now that
the last straggling use cases of it have been ported to the new one
(meaning cbfs_map()/cbfs_load()/etc... see CB:39304 and CB:38421).
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I1cec0ca2d9d311626a087318d1d78163243bfc3c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59682
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
The patch refectors cpu_set_p_state_to_max_non_turbo_ratio(). The
function is updated to use cpu_get_max_non_turbo_ratio().
TEST=Build the code for Brya
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: If73df17faaf7b870ae311460a868d52352683c0c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59789
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
The patch defines below APIs :
cpu_is_hybrid_supported() : Check whether CPU is hybrid CPU or not.
cpu_get_bus_frequency() : Get CPU's bus frequency in MHz
cpu_get_max_non_turbo_ratio() : Get CPU's max non-turbo ratio
cpu_get_cpu_type() : Get CPU type. The function must be called if
executing CPU is hybrid.
TEST=Verified the APIs on the Brya board
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I680f43952ab4abce6e342206688ad32814970a91
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59124
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This patch adds the setting of PsysPmax to 143 W according to
gimble board design.
BUG=b:206990759
TEST=emerge-brya coreboot chromeos-bootimage & ensure the value is
passed to FSP by enabling FSP log & Boot into the OS
Change-Id: Id6a203f05ecfcc1020a422850d35fa3fa64e01d0
Signed-off-by: Chia-Ling Hou <chia-ling.hou@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59797
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ryan Lin <ryan.lin@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This enum is useful to have around for more than just the one file, so
move it to a common header file, and while we're there, also add an
option for UNKNOWN.
TEST=boot test on brya0
Change-Id: I9ccf0ed9504dbf6c60e521a45ea4b916d3dcbeda
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59852
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Some acpigen code may use mutexes, and it is a common idiom to pass
a value for the Timeout field of 0xffff, which is interpreted by OSPM
to mean "no timeout". Therefore add a macro for this value.
BUG=b:197983574
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I16bc9f3f04dd1e3dc0f3eca3e56377e6f48132b2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59851
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Eject event is high. Set wake event to active high. The polarity of the SCI and the wakeup_event_action for the pen ejection feature were both
backwards, and was causing the system to fail to enter sleep states
because the event was always asserted.
BUG=b:208937710
TEST=only release switch can wake system.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I568e9175c7a66599f7a525c32e4def7a79b55a0a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59861
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Fixes commit 29c7622 ("cpu/x86/mp_init.c: Fix building with no
smihandler") broke SMM init because is_smm_enable() was called before
smm_enable.
Rework the code a little to make it clear what codepaths are used with
CONFIG_HAVE_SMI_HANDLER.
TESTED: now prodrive/hermes boots again.
Change-Id: If4ce0dca2f29754d131dacf2da63e946be9a7b6d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59912
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The stryke project/mainboard never ended up being built and was
cancelled early on, therefore remove it from the tree.
Change-Id: I4d91fbd4ba0abe0cf599e8e75f04398ef9ff5222
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59875
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Check the Alderlake CPU ID to determine if cse sub-paritition update is
required or not.
BUG=b:202143532
Change-Id: Icae21dad56ed4a1edea1f641b3d5bccc3943f831
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59826
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This patch adds the following support to coreboot
1. Kconfig to add IOM/NPHY in the COREBOOT/FW_MAIN_A/FW_MAIN_B
partition of BIOS
2. Helper functions to support update.
Pre-requisites to enable IOM/NPHY FW Update:
1. NPHY and IOM blobs have to be added to added COREBOOT, FW_MAIN_A and
FW_MAIN_B through board configuration files.
CONFIG_SOC_INTEL_CSE_IOM_CBFS_FILE: IOM blob Path
SOC_INTEL_CSE_NPHY_CBFS_FILE: NPHY blob path
2. Enable CONFIG_CSE_SUB_PARTITION_UPDATE to enable CSE sub-partition
NPHY/IOM update.
coreboot follows below procedure to update NPHY and IOM:
NPHY Update:
1. coreboot will navigate through the CSE region,
identify the CSE’s NPHY FW version and BIOS NPHY version.
2. Compare both versions, if there is a difference, CSE will trigger an
NPHY FW update. Otherwise, skips the NPHY FW update.
IOM Update:
1. coreboot will navigate through the CSE region, identify CSE's IOM
FW version and BIOS IOM version.
2. Compares both versions, if there is a difference, coreboot will
trigger an IOM FW update.Otherwise, skip IOM FW update.
Before coreboot triggers update of NPHY/IOM, BIOS sends SET BOOT
PARTITION INFO(RO) to CSE and issues GLOBAL RESET commands if CSE
boots from RW. coreboot updates CSE's NPHY and IOM sub-partition only
if CSE boots from CSE RO Boot partition.
Once CSE boots from RO, BIOS sends HMRFPO command to CSE, then
triggers update of NPHY and IOM FW in the CSE Region(RO and RW).
coreboot triggers NPHY/IOM update procedure in all ChromeOS boot
modes(Normal and Recovery).
BUG=b:202143532
BRANCH=None
TEST=Build and verify CSE sub-partitions IOM and NPHY are getting
updated with CBFS IOM and NPHY blobs.
Verified TBT, type-C display, NVMe, SD card, WWAN, Wifi working after
the update.
Change-Id: I7c0cda51314c4f722f5432486a43e19b46f4b240
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59685
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This patch adds a check to determine if the CSE's current operation mode
is ME_HFS1_COM_SECOVER_MEI_MSG or not before sending HMRFPO_ENABLE
command to CSE. If CSE is already in the ME_HFS1_COM_SECOVER_MEI_MSG,
coreboot skips sending HMRFPO_ENABLE command to CSE to unlock the CSE RW
partition.
TEST=Verify sending HMRFPO_ENABLE command on Brya system.
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I387ac7c7296ab06b9bb440d5d40c3286bf879d3b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59698
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
The patch renames the compare_cse_version() function to the
cse_compare_sub_part_version(). It makes the function generic so that
it can be used to compare version of any CSE sub-partition like IOM,
NPHY etc.
TEST=Verified build for Brya
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I88a44a3c0ba2ad8a589602a35ea644dab535b287
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59689
Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Introduce the `SOC_INTEL_ALDERLAKE_PCH_N` Kconfig option and use it to
specify the correct amount of PCIe I/O.
Document number 645550 indicates that Alder Lake-N has 12 PCH root ports
and no CPU root ports.
Document number 645548 indicates ADL-N has 5 clock sources and 5 clock
request signals.
Signed-off-by: Usha P <usha.p@intel.com>
Change-Id: I7ebbcdcdb1ccc34b80ec71ac3e591fe4ad6b1904
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59752
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This patch moves the CBFS file measurement when CONFIG_TPM_MEASURED_BOOT
is enabled from the lookup step into the code where a file is actually
loaded or mapped from flash. This has the advantage that CBFS routines
which just look up a file to inspect its metadata (e.g. cbfs_get_size())
do not cause the file to be measured twice. It also removes the existing
inefficiency that files are loaded twice when measurement is enabled
(once to measure and then again when they are used). When CBFS
verification is enabled and uses the same hash algorithm as the TPM, we
are even able to only hash the file a single time and use the result for
both purposes.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I70d7066c6768195077f083c7ffdfa30d9182b2b7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59681
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Add WiFi SAR table for felwinter.
BUG=b:206901900
TEST=emerge-brya chromeos-config chromeos-config-bsp-private
coreboot-private-files-baseboard-brya coreboot chromeos-bootimage
and checked SAR table can load by WiFi driver.
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Change-Id: I0de710f4447302ee545a67cbd79373bdd2077637
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59718
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Change HID name from INT3499 to PRP0001 along with size and
address width. Size decreased from 10K to 2K, address width
decreased from 14 to 8.
BUG=b:203014972
Test= Boot board and issue commands:
`cat /sys/bus/i2c/devices/i2c-PRP0001:02/eeprom >
./brya_imx208_eeprom.bin`
`hexdump -C brya_imx208_eeprom.bin > brya_imx208_eeprom_dump.log`
You should see the result in brya_imx208_eeprom_dump.log to be
same as module nvm file by vendor provided or meet the Intel nvm
calibration format.
(e.g. first 4 bytes be 0x01, 0x03, 0x01, 0x00)
Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com>
Change-Id: Ib2366ba4c8bb70d8cc82e64ca585b118a96260c0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58374
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Add new memory parts in memory_parts_used.txt and generate SPD id for
these parts:
Samsung K4U6E3S4AA-MGCL
BUG=b:204014463
TEST=run part_id_gen to generate SPD id
Change-Id: Icb0f211508450b16b2e5d214ae6adc9852718a59
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59642
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
The 'at' part of the name refers to starting to read from a specific
offset, so it doesn't make sense for the 'full' version of the function.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I60d595f0cbd161df171eaa4a76c7a00b6377e2b0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59820
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The build fails because smm_stub_size() tries to find a symbol that
won't be present.
Change-Id: I73fee3cf26c0e37cca03299c6730f7b4f1ef6685
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54754
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
The Hermes mainboard is used in different system configurations. The
current VBT for Poseidon systems is unsuitable for Avalanche systems
because display ports are connected differently.
Add a new field in the BMC config EEPROM layout and use it to choose
the correct VBT for every system configuration.
Change-Id: I2647f2ae3f496b9ad75980ba86beb7800fdb0668
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59838
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
