volt_str is used to print information about the RAM configuration
in report_common_dimm(), so let's print out "unknown voltage" if the
voltage isn't recognized rather than a garbage value.
Change-Id: I8e85917fd682e166172fbf10597bde4a8a11dfc7
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1393958, 1393982
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34576
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
* Move armv7 RAM dection to a common place
* Enable it for all emulated platforms
* Use 32bit probe values and restore memory even on failure
* Use the new logic on the following boards:
** qemu-armv7
** qemu-riscv
Tested on qemu-system-riscv:
Fixes kernel panic due to wrong memory limits reported.
Change-Id: I37386c6a95bfc3b7b25aeae32c6e14cff9913513
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33934
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Add VBT 8.0.1038 binary.
Panel #10 is modified to support the 1200x1920 LCD panel.
This panel is configured as default.
LCD and HDMI are working fine.
BUG=N/A
TEST=booting Facebook FBG1701
Change-Id: If327e4e071df61b02fcec45213c2b700320ef269
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34446
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Set FD bit if xHCI is disabled in devicetree.
Change-Id: I3d08ded10daea6d86857ebbbf3f8dcc85ebe9df4
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34336
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Add f81803A plus the capability to control the fan with any fintek SIO.
This will be done through a common API, though currently only F81803A will
have it implemented.
BUG=none.
TEST=Tested later with padmelon board.
Change-Id: I3d336e76bccc38452b1b1aefef5d4a4f7ee129a8
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33623
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Also don't define the default as this result in spurious lines in the
.config.
This also cleans up an unused Kconfig file.
In the generated config.h CPU_QEMU_POWER8 is gone as expected and
ARCH_RAMSTAGE_PPC64 moves a few lines, but the value stays the same.
Change-Id: I70b64e49e1ce07b8f30d9bbc493272bdfb3bb0bf
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31314
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Load SSPM firmware and boot up SSPM.
BUG=b:80501386
BRANCH=none
Test=We can see "SSPM is alive" in ATF stage if SSPM enabled and ipi success
Change-Id: I9285034fc8ce38b40134f5eb7b986a663175e620
Signed-off-by: Erin Lo <erin.lo@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31835
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
We are treating reg_val like a bit mask, so use bitwise or instead of
boolean or, and use |= to enable certain bits instead of overwriting the
whole variable.
Change-Id: Ia8c0ea5a58e25b3b58ed82caba20f8e49a30fb68
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1287070
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34560
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Based on updated schematics, change polarity of USI_INT, and add
the reset and enable GPIOs to the touchscreen ACPI node. The stop
GPIO can't be used with the current implementation of _ON, as the
way it's wired will cause power sequencing to fail.
BUG=b:137133194, b:138240502
BRANCH=none
TEST=Compiles, don't have next board rev to test with
Change-Id: I1dfb8e649418e4c5e9b897fb4bc11393adc21ea2
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34528
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Change-Id: I5aa3bb2c72dcf127d418c989f6b63c9b1f412f08
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34557
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Julius Werner <jwerner@chromium.org>
So far the bootsplash is only correctly rendered if the framebuffer is
set up as 1024x768@16.
Different resolutions did not show anything, differnent depth resulted
in the distorted images.
This commit removes this limit by using the actual framebuffer resolutions
and combines the code for x86 and yabel.
For the moment the bootsplash is still limited to VGA-OptionROM
framebuffer init.
It was tested in 1280x1024@32 on the wip razer blade stealth using the
intel vgabios.
Change-Id: I5ab7b8a0f28badaa16e25dbe807158870d06e26a
Signed-off-by: Johanna Schander <coreboot@mimoja.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34537
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Old comment did not match the pattern required
to not flag the fall-through as an error.
Change-Id: I2afaca969c295a5dc4389dad0ce898c87bb841a6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34578
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-by: Johanna Schander <coreboot@mimoja.de>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Prevent implicit cast to pointers.
The compiler doesn't warn about the conversion from
integer to pointer without a cast, because SA_DEV_ROOT
is literally '0' and there seems to be an exception
for that conversion.
Change-Id: I64fc156e3b9f578414ad03a00edb7cf3e33205c1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34544
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Remove old hda_verb.c code copied from intel/kblrvp7, as it's
been superseded by the common block HDA implementation.
Fixes a null pointer error preventing the HDA codecs from being
initialized, as found in Coverity CID 1403651.
Test: build/boot Librem 13v2, verify functional audio
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Change-Id: I2fd5363aad027f215f93964bc6a85f00fea86c88
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34531
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Also including <types.h>, is supposed to provide stdint and stddef.
Change-Id: Iab605f6be4a48c10fa5aae7a1222520149ad1392
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33691
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Also including <types.h>, is supposed to provide stdint and stddef.
Change-Id: Id6d881055826044d04843ba165641131b9111342
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33690
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Also including <types.h>, is supposed to provide stdint and stddef.
Change-Id: I812d468c68b31917da5d406e2fb3b84bc6331b69
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33687
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
The bus variable doesn't live outside the scope of this function, and is
only used as a convenient way for passing the pointers to all the
sub-functions, so it doesn't need to be allocated. Put it on the stack
instead.
Change-Id: I4370d77445952731d20f7d9a91803612f4d21aef
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1294801
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34499
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The "internal PME" wake-up source could be from integrated LAN,
HD audio/audio DSP, SATA, XHCI, CNVi, or an ME maskable host wake.
chromium:1680839 adds USB port details to the wake-up when the
XHCI causes the wake-up. Expand the logging for wake-up details to
identify and log the other wake-up sources with more details. Note that
wake on Integrated LAN (GbE), SATA, and ME Maskable Host Wake are not
in use on Hatch, so these will not be tested.
BUG=b:128936450
BRANCH=none
TEST=``FW_NAME=hatch emerge-hatch chromeos-ec depthcharge vboot_reference
libpayload coreboot-private-files intel-cmlfsp coreboot-private-files-hatch
coreboot chromeos-bootimage``
Ensure /build/hatch/firmware/image-hatch.serial.bin has been built.
Program image-hatch.serial.bin into the DUT using flashrom.
Switch the DUT to the console (Ctrl-Alt-F2, or use the AP console via
servo).
XHCI USB 2.0
* Plug a USB keyboard into a USB-A port
* ``powerd_dbus_suspend``
* Verify low power mode by issuing the ``powerinfo`` command on the EC
console (via servo). Expect to see ``power state 4 = S0ix``.
* Press a key on the USB keyboard
* ``mosys eventlog list`` shows:
12 | 2019-06-26 14:52:23 | S0ix Enter
13 | 2019-06-26 14:53:07 | S0ix Exit
14 | 2019-06-26 14:53:07 | Wake Source | PME - XHCI (USB 2.0 port) | 3
15 | 2019-06-26 14:53:07 | Wake Source | GPE # | 109
CNVi (connected to Wi-Fi):
* Enable wake on disconnect via ``iw phy0 wowlan enable disconnect``
* Set up a hotspot on an Android phone
* Connect the Chromebook to th hotspot
* ``powerd_dbus_suspend``
* Verify low power mode by issuing the ``powerinfo`` command on the EC
console (via servo). Expect to see ``power state 4 = S0ix``.
* Turn off the hotspot on the phone
* ``mosys eventlog list`` shows:
8 | 2019-07-11 10:58:17 | S0ix Enter
9 | 2019-07-11 10:59:17 | S0ix Exit
10 | 2019-07-11 10:59:17 | Wake Source | PME - WIFI | 0
11 | 2019-07-11 10:59:17 | Wake Source | GPE # | 109
XHCI USB 3.0
* TBD
HD Audio
* TBD
Change-Id: I2c71f6a56b4e1658a7427f67fa78af773b97ec7f
Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34289
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The perennial problem with u16 << 16 strikes again - the u16 is
implicitly promoted to an int before the shift, which will then become
negative if the highest bit of the u16 was set. Normally this isn't much
of a problem, but in this case tegra_dsi_writel() expects a 64 bit integer
for that argument, and so it will be sign-extended to a very large
unsigned integer if it is negative. Cast bytes to a u32 beforehand to
prevent the implicit promotion and thus this problem.
Change-Id: Iaf0fb1040ccafafde0093e9bb192c802b86cb2ac
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1294800
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34529
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Check that tx is not null before accessing it, similar to the previous
if statements.
Change-Id: I820cb670026bb12a54c63227aa04e778fd49c66a
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1294805
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34530
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This multiplication is of the form u64 = u32 * u32. Despite being stored
in a 64 bit variable, the intermediate value is still calculated using
32 bit math, which could possibly overflow. Cast one of the variables to
a u64 to ensure it uses 64 bit math instead to avoid this.
Change-Id: Ib08624812e933fdca5a51150ab36d3be49383326
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1375443
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34524
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This patch creates new kconfig option to bring display over external
PCI based GFX card. This kconfig to select required kconfig which are
not default selected by VGA_ROM_RUN to launch legacy oprom from pci
based GFX card.
Change-Id: I8ebde69e38defbe3321eb5e5bbd632c209ae2cd8
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33738
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Building for ChromeOS implies the use of Depthcharge which doesn't
support legacy text mode.
Change-Id: I7fd82bfed1e59de2de75419cfaea6f0c19cfdf5e
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34483
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Set the controller state to D0 during the GSPI sequence,this ensures
the controller is up and active.
BUG=b:135941367
TEST=Verify no timeouts seen during GSPI controller enumeration
sequence for CML and ICL platforms.
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Change-Id: I2f95059453ca5565a38650b147590ece4d8bf5ed
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34449
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Set the controller state to D0 during the uart init sequence, this
ensures the controller is up and active.
One more argument struct device *dev has been added
to uart_lpss_init function for the same.
BUG=b:135941367
TEST=Verify no timeouts seen during UART controller enumeration
sequence in CML and ICL platforms.
Signed-off-by: Usha P <usha.p@intel.com>
Change-Id: I0187267670e1dea3e1d5e83d0b29967724d6063e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34447
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch appends a unit (milliseconds) to time-out macro names for
better understanding the code which is using the macros.
Change-Id: Ibc4beda2660a83fd5f0ed325b2ee3148c6d96639
Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34384
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch provides an increased timeout (60ms -> 1s) for SPI
HW-sequencing flash erase operations. Without that the erase for MRC
cache writing on siemens/mc_bdx1 sometimes goes wrong because the
timeout stops waiting for flash cycle completion. It was found
during continuous integration. Investigation showed that the used flash
type takes sporadic (e.g. 5% of the test cycles) more time for completion
of erasing operation if the ambient temperature increases. The measured
time values are in range of data sheet of SPI flash. 60ms is a typical
value. So increasing the value is necessary.
tested on siemens/bdx1; measured time values with increased ambient
temperature of flash were always smaller than worst case value of 1s.
Change-Id: Id50636f9ed834ffd7810946798b300e58b2c14d2
Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34173
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
This patch moves SPI_FLASH time-outs from spi/spi_flash_internal.h for
SPI SW-sequencing to include/spi-generic.h to provide also for
SPI HW-sequencing.
tested on siemens/bdx1 and checked if all includes of
spi_flash_internal.h on other places provide an include of
spi-generic.h before
Change-Id: I837f1a027b836996bc42389bdf7dbab7f0e9db09
Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34345
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Enable I2C0 in fleex then verify EMR function successfully
BUG=b:135968368
BRANCH=octopus
TEST=EMR function working normally with I2C0 in Grob360S.
Change-Id: I784ff32418bc839bcec14fbfd7236f708828690e
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34364
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marco Chen <marcochen@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
vboot_handoff is no longer used in coreboot, and is not
needed in CBMEM or cbtable.
BUG=b:124141368, b:124192753
TEST=make clean && make runtests
BRANCH=none
Change-Id: I782d53f969dc9ae2775e3060371d06e7bf8e1af6
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33536
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
SRCCLKENA holds 26M clock, which will fail suspend/resume,
and the SRCCLKENA is not used by mt8183,
so we can simply release it for suspend/resume to work.
BUG=b:80501386
BRANCH=none
Test=Boots correctly on Kukui, suspend test pass.
Change-Id: Ib6e11faeb6936a1dd6bbe8b1a8b612446bf51082
Signed-off-by: Yanjie.jiang <yanjie.jiang@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32666
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
SSPM is "Secure System Power Manager" that provides power control in
secure domain. The initialization flow is to load SSPM firmware to
its SRAM space and then enable.
BUG=b:80501386
BRANCH=none
Test=Build pass
Change-Id: I4ae6034454326f5115cd3948819adc448b67fb1c
Signed-off-by: Erin Lo <erin.lo@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31516
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
commit bde6d309df (x86: Change MMIO addr in
readN(addr)/writeN(addr, val) to pointer) accidentally changed
the type of reg32 to a u8 *, so change it back to a u32.
Change-Id: If6beff17ed3ddf85889aba5f41d1ba112cd74075
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1402160
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34486
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
