This brings the old raminit implementation for CX700 back. It was
removed in commit e99f0390b9 (Remove VIA CX700 northbridge sup-
port). The code is mostly unchanged, three minor issues are fixed:
* A shift (>>= 2) was missing when reading tRRD from SPD byte 28.
The fixed value matches what the vendor BIOS of a VIA EPIA-EX
board programs. The code also suggests that we are looking for
a small value (<= 19 for DDR2-533).
* We allow the board port to specify which clock outputs should
be enabled now. This is necessary for the VIA EPIA-EX, which
needs the ALL_MCLKO setting (instead of the previously hard-
coded MCLKO2.
* When programming the DQS output delays, we considered the 1~2
rank values only for single-rank configurations. Changing the
`< 2` to `<= 2` brings us closer to the vendor values on the
VIA EPIA-EX.
Otherwise a lot of cosmetics changed. Partly because the original
code was to be #included into another C file, but also to satisfy
checkpatch. Also, all the #if'd code was removed (32-bit width
option, ECC, etc.).
Change-Id: Ibc36b4f314cdf47f18c8be0fcb98218c50938e94
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82770
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
PRMRR (Protected Region Memory Range Region) are not accessible as
normal DRAM regions and needs to be explicitly reserved in memory
map.
Change-Id: I81d17b1376459510f7c0d43ba4b519b1f2bd3e1f
Signed-off-by: Gang Chen <gang.c.chen@intel.com>
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Signed-off-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84314
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Definitions of __fls/__ffs from lib.h and fms/fls from
cpu/x86/mtrr.h are duplicated. Use definition from lib.h which is
more generic.
Change-Id: Ic9c6f1027447b04627d7f21d777cbea142588093
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Suggested-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/85104
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The overall procedure is taken from the original code that was removed
in commit 4c38ed3c38 (cpu/via/nano: Drop support). Boilerplate at the
start and end was updated (expect timestamp and BIST result in `xmm*'
registers), stack is aligned to 16B, and linker symbols are now used
for the CAR and cached XIP ranges.
Change-Id: Ia190a3006fe897861b7b8a64d47e588871120dd1
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82766
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
As per commit 8651731537 ("sconfig: Move config_of_soc from device.h
to static.h") and commit 05a13e7ed9 ("sconfig: Move (WEAK_)DEV_PTR
from device.h to static.h"), sources that use code generated from the
devicetree should directly include static.h. This allows static.h to be
removed from device.h, eliminating many unnecessary dependencies on the
devicetree for objects that only need the device types and function
declarations.
Add static.h to the includes of all remaining files that require static
devicetree access through config_of_soc(), the sconfig generated names,
or DEV_PTR().
Change-Id: I1d35ff2ac22f9ff5e0aa38b7ad707619e50387f3
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84591
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Intel platform boot policy setting blob is linked into FIT table
as an FIT4 entry. It is required for server executing CBnT and/or
PFR without a PCH.
Please refer to chapter 4.6 of the document in below link:
https://www.intel.com/content/dam/www/public/us/en/documents/
guides/fit-bios-specification.pdf
Tool usage:
./util/cbfstool/ifittool -f <binary> -a -n <cbfs name> -t 4 \
-r COREBOOT -s <max table size>
Change-Id: I0f9fc61341430b1a35a44d50b108dcfaf31cd11c
Signed-off-by: Gang Chen <gang.c.chen@intel.com>
Signed-off-by: Li, Jincheng <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84305
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
GCC LTO incorrectly warns about this it seems.
This also exits gracefully from stage-cache code if no smm region is
found.
Change-Id: Ib1851295646258e97c489dc7402b9df3fcf092c1
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84040
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
For LTO we want to link everything in one go.
Change-Id: If2c186eb87072e0b80c7e8998b2a0d9bdfddf740
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84037
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When clang supports linking bare metal targets it defaults to LLD for
linking which linking those raw data structures used to generate CBFS
page tables does not fare well.
Change-Id: I66fb374a456ea752a97a41426c5a98e6747f3a92
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84057
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
The current region_end() implementation is susceptible to overflow
if the region is at the end of the addressable space. A common case
with the memory-mapped flash of x86 directly below the 32-bit limit.
Note: This patch also changes console output to inclusive limits.
IMO, to the better.
Change-Id: Ic4bd6eced638745b7e845504da74542e4220554a
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79946
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
We introduce two new functions to create region objects. They allow us
to check for integer overflows (region_create_untrusted()) or assert
their absence (region_create()).
This fixes potential overflows in region_overlap() checks in SMI
handlers, where we would wrongfully report MMIO as *not* overlapping
SMRAM.
Also, two cases of strtol() in parse_region() (cbfstool), where the
results were implicitly converted to `size_t`, are replaced with the
unsigned strtoul().
FIT payload support is left out, as it doesn't use the region API
(only the struct).
Change-Id: I4ae3e6274c981c9ab4fb1263c2a72fa68ef1c32b
Ticket: https://ticket.coreboot.org/issues/522
Found-by: Vadim Zaliva <lord@digamma.ai>
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79905
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Add socket types for LGA1700, LGA3647_1, LGA4189, LGA4677.
Select the socket type for different boards.
For the socket types which are not defined in SMBIOS type4,
CPU_INTEL_SOCKET_OTHER could be used.
Change-Id: Ida3315694f3ce397b9ad9d676d3195da5f096cb7
Signed-off-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83329
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Setting the clamp bit allows the CPU to operate below the highest
non-turbo frequency in order to obey the power limit.
Tested on ThinkPad T420 with the i7-3940XM.
Change-Id: Id0c0aedc29aca121d0fd1d8f8826089e13a026be
Signed-off-by: Anastasios Koutian <akoutian2@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83270
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This commit fixes an incorrect variable name in the page table setup
for 1 GiB pages.
The label PDE_table was used when it should have been PDPT, as it
represents a "Page Directory Pointer Table (PDPT)", not a "Page
Directory Table (PDT) or PDE_Table".
This change ensures correct nomenclature and consistency in the code.
PML4 -> PDPT --------> 1GB Physical Page
As per x86-64 specification, 1GB pages bypass the Page Directory Table
(PDT) level of the page table hierarchy, mapping directly from the
Page Directory Pointer (PDPT) Table to the physical page.
Change-Id: I1e1064653a265215054f31f0e4e46bf8200ca471
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83100
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
This patch flips the polarity of CONFIG_USE_1G_PAGES_TLB into
CONFIG_NEED_SMALL_2MB_PAGE_TABLES which is off by default, meaning
CPUs added in the future will automatically build the smaller 1GB pages.
We can expect support for this feature to be available on all future CPU
generations (with the possible exception of embedded edge cases), so
this default setting should make mistakes less likely and keep
maintenance effort lower. (Besides, enabling the support where it
doesn't work fails fast, whereas keeping it disabled where it could work
is an inefficiency that can easily go overlooked for a long time.)
While this is technically a CPU feature, not a northbridge feature, we
support a lot more individual CPUs than northbridges in the pre-SoC era,
and they tend to be closely coupled anyway. So select the option at the
northbridge level for older CPUs to keep things simpler.
Change-Id: I2cf1237a7fb63b8904c2a3d57fead162c66bacde
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82792
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Code dealing with PAE can be used outside of memset_pae(). This change
extracts creation of identity mapped pagetables to init_pae_pagetables()
and mapping of single 2 MiB map to pae_map_2M_page(). Both functions are
exported in include/cpu/x86/pae.h to allow use outside of pgtbl.c.
MEMSET_PAE_* macros were renamed to PAE_* since they no longer apply
only to memset_pae().
Change-Id: I8aa80eb246ff0e77e1f51d71933d3d00ab75aaeb
Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82249
Reviewed-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
<stdio.h> header is used for input/output operations (such as printf,
scanf, fopen, etc.). Although some input/output functions can manipulate
strings, they do not need to directly include <string.h> because they
are declared independently.
Change-Id: Ibe2a4ff6f68843a6d99cfdfe182cf2dd922802aa
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82665
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This function had roughly the same use (except PAT) as part of
memset_pae(), however the latter is able to make use of PAE and map
physical memory located above 4 GB. Remove paging_identity_map_addr()
to avoid semi-duplicated code.
The function has been unused since CB:26745.
Change-Id: I7a4ebd84a6f5d222c3b2c6c6e3d26d6464cf01b8
Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82248
Reviewed-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This function isn't used anywhere. It probably wouldn't work with
current coreboot anyway, as it identity mapped lower 2GB of RAM, while
ramstage is run from CBMEM, which is usually just below top of memory.
It was last used in K8 code that is long gone.
Change-Id: I97e2830f381181d7f21ab5f6d4c544066c15b08c
Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82247
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Allow to set board specific CPU voltage regulator settings.
The VR12 compatible voltage regulator for the CPU can be configured
by two MSRs. Currently a default value is applied, which mimics the
Intel reference code and is what the BWG suggest. However most board
vendors fill in the actual VR parameters to support OC or ULV board
variants.
When the mainboard design is too different from the Intel reference
design, not updating the VR settings might result in:
- unstable system behaviour
- limited turbo performance
- excessive battery drain
- no over-clocking capability
This patch adds support to set the board specific current limit for
Icc and Igfx.
It also allows to adjust PSI1, PSI2 and PSI3, which are powerstates
used by the VR, that consume less energy when the system is idle.
Test on Lenovo X220 with full CPU load after 1 minute, compared to
previous code with default settings:
- Limiting PP0 max current below Iccmax results in less CPU performance.
RAPL readings show that less power is drawn over time.
- Limiting PP0 max current to Iccmax results in equal CPU performance.
RAPL readings show that the same power is drawn over time.
- Setting the PP0 max current to a value >> Iccmax results in equal CPU
performance. RAPL readings show that the same power is drawn over
time.
- Updating the MSR at runtime has no effect.
Change-Id: I59edab47fc4fbe0240e1dd7d25647f7549b4def2
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81597
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Core 2 platforms have issues with HPET. Enable support to use the LAPIC
driver so those machines actually boot and don't hang.
The LAPIC is actually closer to the CPU than the HPET (on the PCH),
which reduces access latency, leading to higher resolution of the timer.
Tested on a Lenovo X200 with a Core 2 Duo.
Change-Id: I33144d6c1c120e7faa47b99e8262b0997c45c9b9
Signed-off-by: Jean Lucas <jean@4ray.co>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82000
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
<string.h> is supposed to provide <stdarg.h> and <stdio.h>
Change-Id: I021ba535ba5ec683021c4dfc41ac18d9cebbcfd2
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81853
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
<device/device.h> is supposed to provide <device/{path,resource}.h>
Change-Id: I2ef82c8fe30b1c1399a9f85c1734ce8ba16a1f88
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81830
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
This removes the runtime SMI call to set up the communication buffer
for SMMSTORE in favor of setting this buffer up during the installation
of the smihandler.
The reason is that it's less code in the handler and a time costly SMI
is also avoided in ramstage.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I94dce77711f37f87033530f5ae48cb850a39341b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79738
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Currently the SRAT table only exposes one proximity group as
it uses the LAPIC node_id, which is always initialized to 0.
Use CPUID leaf 0x1f or 0xb to gather the node ID and fill it
to make sure that at least one proximity group for every socket
is advertised.
For now the SNC config isn't taken into account.
Change-Id: Ia3ed1e5923aa18ca7619b32cde491fdb4da0fa0d
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81515
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
With SMM holding page tables itself, we can consider SMM support stable
and safe enough for general use.
Also update the respective documentation.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Ifcf0a1a5097a2d7c064bb709ec0b09ebee13a47d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80338
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
When switching back and forth between 32 to 64 bit mode, for example to
call a 32-bits FSP or to call the payload, new page tables in the
respective stage will be linked.
The advantages of this approach are:
- No need to determine a good place for page tables in CBFS that does
not overlap.
- Works with non memory mapped flash (however all coreboot targets
currently do support this)
- If later stages can use their own page tables which fits better with
the vboot RO/RW flow
A disadvantage is that it increases the stage size. This could be
improved upon by using 1G pages and generating the pages at runtime.
Note: qemu cannot have the page tables in the RO boot medium and needs
to relocate them at runtime. This is why keeping the existing code with
page tables in CBFS is done for now.
TEST: Booted to payload on google/vilbox and qemu/q35
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Ied54b66b930187cba5fbc578a81ed5859a616562
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80337
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This data is used by smm_region_overlaps_handler(). Callers use this
helper to determine if it's safe to read/write to memory buffers taken
from untrusted input.
coreboot SMI handlers must not be confused into writing over any SMRAM
subregion, which includes the TSEG_STAGE_CACHE and chipset-specific area
(sometimes, IED), not just the handlers.
If stage cache writes were permitted, this could compromise the
integrity of the S3 resume path.
The consequences to overwriting the chipset-specific area are undefined.
Change-Id: Ibd9ed34fcfd77a4236b5cf122747a6718ce9c91f
Signed-off-by: Benjamin Doron <benjamin.doron@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80703
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
The commit below uses USE_1G_PAGETABLES config flag instead of
the correct USE_1G_PAGES_TLB.
"commit ecbc243a45
("cpu/x86: Add 1GiB pages for memory access up to 512GiB")"
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: Ic19812bc1f90cbe7d3739c42a0314b3650e0501d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81343
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Improves user experience by highlighting a possibility of runtime
hangs caused by unsupported WB caching during NEM.
Recently we have encountered an issue on Intel platform and came to
know about the NEM logical limitation where due to cache sets are not
in power_on_two running into a runtime hang upon enabling WB caching.
BUG=b:306677879
BRANCH=firmware-rex-15709.B
TEST=Verified boot on google/ovis and google/rex (including Ovis with
non-power-of-two cache configuration).
Change-Id: Ic4fbef1fcc018856420428139683897634c9f85d
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81336
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Relying on page tables being in RO flash is not safe in every setup,
therefore set up some page tables in SMRAM that the permanent smihandler
can use.
Tested on QEMU.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Icb3086abd577b9abb9966dd910a264a873ace4ed
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80336
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
To allow for more flexibility like generating page tables at runtime or
page tables that are part of the ramstage, add a parameter to
sipi_vector.S and smm_stub.S so that APs use the same page tables as the
BSP during their initialization.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I1250ea6f63c65228178ee66e06d988dadfcc2a37
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80335
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
No rmodule was using heap.
Change-Id: I0bc049a5231dabbec1c962a99ef875eddcc4ac6e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80733
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
