exynos5420: Tighten up displayport timing loops
We were running this loop 100 times with 5 ms delays. Change it
to run 500 times with 1 ms delays, which gives us the same
overall timeout but lets us bail out a bit sooner -- in practice,
at most, 4 ms sooner but every bit counts. Note, however, that
the tighter timing does reduce opportunities for threading. There
is a non-obvious set of tradeoffs on timeouts.
Change-Id: I4af671c2a791aa92e446e66ac2fe5710d1e6aa4c
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://chromium-review.googlesource.com/167387
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Commit-Queue: ron minnich <rminnich@chromium.org>
Tested-by: ron minnich <rminnich@chromium.org>
(cherry picked from commit 575e910127)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6543
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This commit is contained in:
parent
985ff36bee
commit
cff6667eba
1 changed files with 5 additions and 2 deletions
|
|
@ -845,7 +845,7 @@ static unsigned int exynos_dp_config_video(struct edp_device_info *edp_info)
|
|||
exynos_dp_start_video();
|
||||
|
||||
if (edp_info->video_info.master_mode == 0) {
|
||||
retry_cnt = 100;
|
||||
retry_cnt = 500;
|
||||
while (retry_cnt) {
|
||||
ret = exynos_dp_is_video_stream_on();
|
||||
if (ret != EXYNOS_DP_SUCCESS) {
|
||||
|
|
@ -857,7 +857,10 @@ static unsigned int exynos_dp_config_video(struct edp_device_info *edp_info)
|
|||
printk(BIOS_DEBUG, "DP video stream is on\n");
|
||||
break;
|
||||
}
|
||||
mdelay(5);
|
||||
/* this is a cheap operation, involving some register
|
||||
* reads, and no AUX channel IO. A ms. delay is fine.
|
||||
*/
|
||||
mdelay(1);
|
||||
}
|
||||
}
|
||||
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue