From c8e549a3ff8c05f8131fdd92287627ed3602b044 Mon Sep 17 00:00:00 2001 From: Uwe Hermann Date: Thu, 3 May 2007 00:20:53 +0000 Subject: [PATCH] Fix a bunch of typos (trivial). Signed-off-by: Uwe Hermann Acked-by: Uwe Hermann git-svn-id: svn://coreboot.org/repository/LinuxBIOSv3@302 f3766cd6-281f-0410-b1cd-43a5c92072e9 --- device/Kconfig | 20 ++++++++++---------- device/cardbus_device.c | 2 +- device/device.c | 6 +++--- device/device_util.c | 2 +- device/hypertransport.c | 8 ++++---- device/pci_device.c | 23 +++++++++++------------ device/pnp_device.c | 2 +- 7 files changed, 31 insertions(+), 32 deletions(-) diff --git a/device/Kconfig b/device/Kconfig index 8669845bc0..25232aeeca 100644 --- a/device/Kconfig +++ b/device/Kconfig @@ -23,7 +23,7 @@ menu "Devices" config PCI_OPTION_ROM_RUN bool help - Execute PCI/AGP option roms if available. This is required to + Execute PCI/AGP option ROMs if available. This is required to enable PCI/AGP VGA plugin cards. This option is not exposed to the user but set by the options PCI_OPTION_ROM_RUN_VM86 and PCI_OPTION_ROM_RUN_X86EMU. @@ -32,17 +32,17 @@ choice prompt "Execute PCI Option ROMs" default PCI_OPTION_ROM_RUN_VM86 help - Execute PCI/AGP option roms if available. You can choose to - execute PCI option roms natively (32bit x86 system required), - in an emulator (x86emu), or ignore option rom execution + Execute PCI/AGP option ROMs if available. You can choose to + execute PCI option ROMs natively (32bit x86 system required), + in an emulator (x86emu), or ignore option ROM execution. config PCI_OPTION_ROM_RUN_X86EMU bool "x86emu" select PCI_OPTION_ROM_RUN help - If choose this option, the x86 instruction set emulator - x86emu is used to execute 16bit legacy bios option roms. + If you choose this option, the x86 instruction set emulator + x86emu is used to execute 16bit legacy BIOS option ROMs. x86emu is slow, big and safe. All 16bit x86 code is executed in an encapsulated environment where it can not break out. @@ -53,17 +53,17 @@ config PCI_OPTION_ROM_RUN_VM86 select PCI_OPTION_ROM_RUN depends ARCH_X86 help - If choose this option, the virtual x86 mode "vm86" is used - to execute 16bit legacy bios option roms. + If you choose this option, the virtual x86 mode "vm86" is used + to execute 16bit legacy BIOS option ROMs. vm86 is very small, fast, and probably a little less safe than - x86emu, since it runs option roms on the real hardware instead + x86emu, since it runs option ROMs on the real hardware instead of an emulator. config PCI_OPTION_ROM_RUN_NONE bool "Disabled" help - Do not execute PCI option roms at all. + Do not execute PCI option ROMs at all. If you choose this option, VGA plugin cards will not be initialized. diff --git a/device/cardbus_device.c b/device/cardbus_device.c index 4cbb585540..06144deb3a 100644 --- a/device/cardbus_device.c +++ b/device/cardbus_device.c @@ -41,7 +41,7 @@ static void cardbus_record_bridge_resource(device_t dev, resource_t moving, resource_t min_size, unsigned int index, unsigned long type) { - /* Initiliaze the constraints on the current bus. */ + /* Initialize the constraints on the current bus. */ struct resource *resource; resource = 0; if (moving) { diff --git a/device/device.c b/device/device.c index 686bfad717..ba16d7badb 100644 --- a/device/device.c +++ b/device/device.c @@ -78,7 +78,7 @@ void dev_init(void) /** * The default constructor, which simply allocates and sets the ops pointer. * - * Allocte a new device structure and initialize device->ops. + * Allocate a new device structure and initialize device->ops. * * @param constructor A pointer to a struct constructor. * @return Pointer to the newly created device structure. @@ -502,7 +502,7 @@ void compute_allocate_resource(struct bus *bus, struct resource *bridge, /* A PCI bridge resource does not need to be a power of two size, but * it does have a minimum granularity. Round the size up to that * minimum granularity so we know not to place something else at an - * address postitively decoded by the bridge. + * address positively decoded by the bridge. */ bridge->size = round(base, bridge->gran) - bridge->base; @@ -518,7 +518,7 @@ static void allocate_vga_resource(void) // FIXME: This function knows too much about PCI stuff, // it should just be an iterator/visitor. - /* FIXME: Handle the VGA pallette snooping. */ + /* FIXME: Handle the VGA palette snooping. */ struct device *dev, *vga, *vga_onboard, *vga_first, *vga_last; struct bus *bus; bus = 0; diff --git a/device/device_util.c b/device/device_util.c index fb012aebc9..c6fab0f0d5 100644 --- a/device/device_util.c +++ b/device/device_util.c @@ -582,7 +582,7 @@ const char *resource_type(struct resource *resource) /** * Print the resource that was just stored. * - * @param dev The device the stored resorce lives on. + * @param dev The device the stored resource lives on. * @param resource The resource that was just stored. */ void report_resource_stored(struct device *dev, struct resource *resource, diff --git a/device/hypertransport.c b/device/hypertransport.c index a16b85af9c..1c833ec1cc 100644 --- a/device/hypertransport.c +++ b/device/hypertransport.c @@ -97,7 +97,7 @@ static unsigned ht_read_freq_cap(device_t dev, unsigned pos) if ((dev->vendor == PCI_VENDOR_ID_AMD) && (dev->device == 0x1100)) { #if K8_HT_FREQ_1G_SUPPORT == 1 #if K8_REV_F_SUPPORT == 0 - if (is_cpu_pre_e0()) { // Only e0 later suupport 1GHz HT. + if (is_cpu_pre_e0()) { // Only e0 later support 1GHz HT. freq_cap &= ~(1 << HT_FREQ_1000Mhz); } #endif @@ -406,7 +406,7 @@ unsigned int hypertransport_scan_chain(struct bus *bus, unsigned int min_devfn, int ht_dev_num = 0; #if HT_CHAIN_END_UNITID_BASE < HT_CHAIN_UNITID_BASE - /* Let't record the device of last HT device, so we can set the + /* Let's record the device of last HT device, so we can set the * unitid to HT_CHAIN_END_UNITID_BASE. */ unsigned int real_last_unitid; @@ -501,7 +501,7 @@ unsigned int hypertransport_scan_chain(struct bus *bus, unsigned int min_devfn, flags |= next_unitid & 0x1f; pci_write_config16(dev, pos + PCI_CAP_FLAGS, flags); - /* Update the Unitd id in the device structure. */ + /* Update the unitid in the device structure. */ static_count = 1; for (func = dev; func; func = func->sibling) { func->path.u.pci.devfn += (next_unitid << 3); @@ -530,7 +530,7 @@ unsigned int hypertransport_scan_chain(struct bus *bus, unsigned int min_devfn, #endif next_unitid += count; - /* Setup the hypetransport link. */ + /* Setup the hypertransport link. */ bus->reset_needed |= ht_setup_link(&prev, dev, pos); printk_debug("%s [%04x/%04x] %s next_unitid: %04x\n", diff --git a/device/pci_device.c b/device/pci_device.c index 44f0e60635..ac1952564d 100644 --- a/device/pci_device.c +++ b/device/pci_device.c @@ -357,7 +357,7 @@ static void pci_record_bridge_resource(struct device *dev, resource_t moving, unsigned int index, unsigned long mask, unsigned long type) { - /* Initiliaze the constraints on the current bus. */ + /* Initialize the constraints on the current bus. */ struct resource *resource; resource = 0; if (moving) { @@ -468,7 +468,7 @@ static void pci_set_resource(struct device *dev, struct resource *resource) return; } - /* If the resource is substractive don't worry about it. */ + /* If the resource is subtractive don't worry about it. */ if (resource->flags & IORESOURCE_SUBTRACTIVE) { return; } @@ -725,7 +725,7 @@ static struct device_operations *get_pci_bridge_ops(struct device *dev) #if CONFIG_PCIX_PLUGIN_SUPPORT == 1 pos = pci_find_capability(dev, PCI_CAP_ID_PCIX); if (pos) { - printk(BIOS_DEBUG, "%s subbordinate bus PCI-X\n", + printk(BIOS_DEBUG, "%s subordinate bus PCI-X\n", dev_path(dev)); return &default_pcix_ops_bus; } @@ -741,7 +741,7 @@ static struct device_operations *get_pci_bridge_ops(struct device *dev) if ((flags >> 13) == 1) { /* Host or Secondary Interface. */ printk(BIOS_DEBUG, - "%s subbordinate bus Hypertransport\n", + "%s subordinate bus Hypertransport\n", dev_path(dev)); return &default_ht_ops_bus; } @@ -756,11 +756,11 @@ static struct device_operations *get_pci_bridge_ops(struct device *dev) case PCI_EXP_TYPE_ROOT_PORT: case PCI_EXP_TYPE_UPSTREAM: case PCI_EXP_TYPE_DOWNSTREAM: - printk(BIOS_DEBUG, "%s subbordinate bus PCI Express\n", + printk(BIOS_DEBUG, "%s subordinate bus PCI Express\n", dev_path(dev)); return &default_pciexp_ops_bus; case PCI_EXP_TYPE_PCI_BRIDGE: - printk(BIOS_DEBUG, "%s subbordinate PCI\n", + printk(BIOS_DEBUG, "%s subordinate PCI\n", dev_path(dev)); return &default_pci_ops_bus; default: @@ -902,10 +902,9 @@ static struct device *pci_scan_get_dev(struct device **list, unsigned int devfn) * * Determine the existence of a given PCI device. * - * @param bus pointer to the bus structure - * @param devfn to look at - * - * @return The device structure for hte device (if found) + * @param bus Pointer to the bus structure. + * @param devfn A device/function number. + * @return The device structure for the device (if found) * or the NULL if no device is found. */ struct device *pci_probe_dev(struct device *dev, struct bus *bus, @@ -922,7 +921,7 @@ struct device *pci_probe_dev(struct device *dev, struct bus *bus, dummy.path.type = DEVICE_PATH_PCI; dummy.path.u.pci.devfn = devfn; id = pci_read_config32(&dummy, PCI_VENDOR_ID); - /* Have we found somthing? + /* Have we found something? * Some broken boards return 0 if a slot is empty. */ if ((id == 0xffffffff) || (id == 0x00000000) || @@ -1189,7 +1188,7 @@ unsigned int do_pci_scan_bridge(struct device *dev, unsigned int max, * This function is the default scan_bus() method for PCI bridge devices. * * @param dev Pointer to the bridge device. - * @param max The highest bus number assgined up to now. + * @param max The highest bus number assigned up to now. * @return The maximum bus number found, after scanning all subordinate buses. */ unsigned int pci_scan_bridge(struct device *dev, unsigned int max) diff --git a/device/pnp_device.c b/device/pnp_device.c index 6455117d4a..5962068c70 100644 --- a/device/pnp_device.c +++ b/device/pnp_device.c @@ -158,7 +158,7 @@ static void pnp_get_ioresource(struct device *dev, unsigned int index, resource = new_resource(dev, index); - /* Initilize the resource. */ + /* Initialize the resource. */ resource->limit = 0xffff; resource->flags |= IORESOURCE_IO;