irq tables, tested and working.

src/mainboard/advantech/pcm-5823/irq_tables.c

@@ -0,0 +1,27 @@
+/* This file was generated by getpir.c, do not modify! 
+   (but if you do, please run checkpir on it to verify)
+   Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up
+
+   Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM
+*/
+
+#include <arch/pirq_routing.h>
+
+const struct irq_routing_table intel_irq_routing_table = {
+	PIRQ_SIGNATURE, /* u32 signature */
+	PIRQ_VERSION,   /* u16 version   */
+	32+16*3,        /* there can be total 3 devices on the bus */
+	0,           /* Where the interrupt router lies (bus) */
+	0x90,           /* Where the interrupt router lies (dev) */
+	0xc00,         /* IRQs devoted exclusively to PCI usage */
+	0x1078,         /* Vendor */
+	0x2,         /* Device */
+	0,         /* Crap (miniport) */
+	{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */
+	0xa,         /*  u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */
+	{
+		{0,0x58, {{0x1, 0xdeb8}, {0x2, 0xdeb8}, {0x3, 0xdeb8}, {0x4, 0xdeb8}}, 0x1, 0},
+		{0,0x60, {{0x2, 0xdeb8}, {0x3, 0xdeb8}, {0x4, 0xdeb8}, {0x1, 0xdeb8}}, 0x2, 0},
+		{0,0x98, {{0x1, 0xdeb8}, {0, 0xdeb8}, {0, 0xdeb8}, {0, 0xdeb8}}, 0, 0},
+	}
+};