diff --git a/src/drivers/intel/mipi_camera/chip.h b/src/drivers/intel/mipi_camera/chip.h
index 696f52cc3a..84b7d0431e 100644
--- a/src/drivers/intel/mipi_camera/chip.h
+++ b/src/drivers/intel/mipi_camera/chip.h
@@ -6,6 +6,7 @@
 #include <stdint.h>
 #include <acpi/acpi_pld.h>
 #include <uuid.h>
+#include "ssdb.h"
 
 #define DEFAULT_LINK_FREQ	450000000
 #define MAX_PWDB_ENTRIES	12
@@ -33,43 +34,6 @@
 #define SEQ_OPS_GPIO_DISABLE(ind, delay) \
 	{ .type = GPIO, .index = (ind), .action = DISABLE, .delay_ms = (delay) }
 
-enum camera_device_type {
-	DEV_TYPE_SENSOR = 0,
-	DEV_TYPE_VCM,
-	DEV_TYPE_ROM
-};
-
-enum intel_camera_platform_type {
-	PLATFORM_BXT = 8,
-	PLATFORM_SKC = 9,
-	PLATFORM_CNL = 10,
-	PLATFORM_TGL = 12,
-	PLATFORM_JSL = 14,
-	PLATFORM_ADL = 15,
-	PLATFORM_MTL = 16,
-	PLATFORM_LNL = 17
-};
-
-enum intel_camera_flash_type {
-	FLASH_DEFAULT = 0,
-	FLASH_DISABLE = 2,
-	FLASH_ENABLE = 3
-};
-
-enum intel_camera_led_type {
-	PRIVACY_LED_DEFAULT = 0,
-	PRIVACY_LED_A_16mA
-};
-
-enum intel_camera_mipi_info {
-	MIPI_INFO_SENSOR_DRIVER = 0,
-	MIPI_INFO_ACPI_DEFINED
-};
-
-#define CLK_FREQ_19_2MHZ	19200000
-#define CLK_FREQ_24MHZ		24000000
-#define CLK_FREQ_20MHZ		20000000
-
 enum intel_camera_device_type {
 	INTEL_ACPI_CAMERA_CIO2,
 	INTEL_ACPI_CAMERA_IMGU,
@@ -147,60 +111,6 @@ struct operation_seq {
 	uint8_t ops_cnt;
 };
 
-struct intel_ssdb {
-	uint8_t version;			/* Current version */
-	uint8_t sensor_card_sku;		/* CRD Board type */
-	guid_t csi2_data_stream_interface;	/* CSI2 data stream GUID */
-	uint16_t bdf_value;			/* Bus number of the host
-						controller */
-	uint32_t dphy_link_en_fuses;		/* Host controller's fuses
-						information used to verify if
-						link is fused out or not */
-	uint32_t lanes_clock_division;		/* Lanes/clock divisions per
-						sensor */
-	uint8_t link_used;			/* Link used by this sensor
-						stream */
-	uint8_t lanes_used;			/* Number of lanes connected for
-						the sensor */
-	uint32_t csi_rx_dly_cnt_termen_clane;	/* MIPI timing information */
-	uint32_t csi_rx_dly_cnt_settle_clane;	/* MIPI timing information */
-	uint32_t csi_rx_dly_cnt_termen_dlane0;	/* MIPI timing information */
-	uint32_t csi_rx_dly_cnt_settle_dlane0;	/* MIPI timing information */
-	uint32_t csi_rx_dly_cnt_termen_dlane1;	/* MIPI timing information */
-	uint32_t csi_rx_dly_cnt_settle_dlane1;	/* MIPI timing information */
-	uint32_t csi_rx_dly_cnt_termen_dlane2;	/* MIPI timing information */
-	uint32_t csi_rx_dly_cnt_settle_dlane2;	/* MIPI timing information */
-	uint32_t csi_rx_dly_cnt_termen_dlane3;	/* MIPI timing information */
-	uint32_t csi_rx_dly_cnt_settle_dlane3;	/* MIPI timing information */
-	uint32_t max_lane_speed;		/* Maximum lane speed for
-						the sensor */
-	uint8_t sensor_cal_file_idx;		/* Legacy field for sensor
-						calibration file index */
-	uint8_t sensor_cal_file_idx_mbz[3];	/* Legacy field for sensor
-						calibration file index */
-	uint8_t rom_type;			/* NVM type of the camera
-						module */
-	uint8_t vcm_type;			/* VCM type of the camera
-						module */
-	uint8_t platform;			/* Platform information */
-	uint8_t platform_sub;			/* Platform sub-categories */
-	uint8_t flash_support;			/* Enable/disable flash
-						support */
-	uint8_t privacy_led;			/* Privacy LED support */
-	uint8_t degree;				/* Camera Orientation */
-	uint8_t mipi_define;			/* MIPI info defined in ACPI or
-						sensor driver */
-	uint32_t mclk_speed;			/* Clock info for sensor */
-	uint8_t control_logic_id;		/* PMIC device node used for
-						the camera sensor */
-	uint8_t mipi_data_format;		/* MIPI data format */
-	uint8_t silicon_version;		/* Silicon version */
-	uint8_t customer_id;			/* Customer ID */
-	uint8_t mclk_port;
-	uint8_t reserved[13];			/* Pads SSDB out so the binary blob in ACPI is
-						   the same size as seen on other firmwares.*/
-} __packed;
-
 struct intel_pwdb {
 	char name[32];		/* Name of the resource required by the power
 				action */
diff --git a/src/drivers/intel/mipi_camera/ssdb.h b/src/drivers/intel/mipi_camera/ssdb.h
new file mode 100644
index 0000000000..9845b162cd
--- /dev/null
+++ b/src/drivers/intel/mipi_camera/ssdb.h
@@ -0,0 +1,100 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __INTEL_MIPI_CAMERA_SSDB_H__
+#define __INTEL_MIPI_CAMERA_SSDB_H__
+
+#include <stdint.h>
+#include <uuid.h>
+
+enum camera_device_type {
+	DEV_TYPE_SENSOR = 0,
+	DEV_TYPE_VCM,
+	DEV_TYPE_ROM
+};
+
+enum intel_camera_platform_type {
+	PLATFORM_BXT = 8,
+	PLATFORM_SKC = 9,
+	PLATFORM_CNL = 10,
+	PLATFORM_TGL = 12,
+	PLATFORM_JSL = 14,
+	PLATFORM_ADL = 15,
+	PLATFORM_MTL = 16,
+	PLATFORM_LNL = 17
+};
+
+enum intel_camera_flash_type {
+	FLASH_DEFAULT = 0,
+	FLASH_DISABLE = 2,
+	FLASH_ENABLE = 3
+};
+
+enum intel_camera_led_type {
+	PRIVACY_LED_DEFAULT = 0,
+	PRIVACY_LED_A_16mA
+};
+
+enum intel_camera_mipi_info {
+	MIPI_INFO_SENSOR_DRIVER = 0,
+	MIPI_INFO_ACPI_DEFINED
+};
+
+#define CLK_FREQ_19_2MHZ	19200000
+#define CLK_FREQ_24MHZ		24000000
+#define CLK_FREQ_20MHZ		20000000
+
+struct intel_ssdb {
+	uint8_t version;			/* Current version */
+	uint8_t sensor_card_sku;		/* CRD Board type */
+	guid_t csi2_data_stream_interface;	/* CSI2 data stream GUID */
+	uint16_t bdf_value;			/* Bus number of the host
+						controller */
+	uint32_t dphy_link_en_fuses;		/* Host controller's fuses
+						information used to verify if
+						link is fused out or not */
+	uint32_t lanes_clock_division;		/* Lanes/clock divisions per
+						sensor */
+	uint8_t link_used;			/* Link used by this sensor
+						stream */
+	uint8_t lanes_used;			/* Number of lanes connected for
+						the sensor */
+	uint32_t csi_rx_dly_cnt_termen_clane;	/* MIPI timing information */
+	uint32_t csi_rx_dly_cnt_settle_clane;	/* MIPI timing information */
+	uint32_t csi_rx_dly_cnt_termen_dlane0;	/* MIPI timing information */
+	uint32_t csi_rx_dly_cnt_settle_dlane0;	/* MIPI timing information */
+	uint32_t csi_rx_dly_cnt_termen_dlane1;	/* MIPI timing information */
+	uint32_t csi_rx_dly_cnt_settle_dlane1;	/* MIPI timing information */
+	uint32_t csi_rx_dly_cnt_termen_dlane2;	/* MIPI timing information */
+	uint32_t csi_rx_dly_cnt_settle_dlane2;	/* MIPI timing information */
+	uint32_t csi_rx_dly_cnt_termen_dlane3;	/* MIPI timing information */
+	uint32_t csi_rx_dly_cnt_settle_dlane3;	/* MIPI timing information */
+	uint32_t max_lane_speed;		/* Maximum lane speed for
+						the sensor */
+	uint8_t sensor_cal_file_idx;		/* Legacy field for sensor
+						calibration file index */
+	uint8_t sensor_cal_file_idx_mbz[3];	/* Legacy field for sensor
+						calibration file index */
+	uint8_t rom_type;			/* NVM type of the camera
+						module */
+	uint8_t vcm_type;			/* VCM type of the camera
+						module */
+	uint8_t platform;			/* Platform information */
+	uint8_t platform_sub;			/* Platform sub-categories */
+	uint8_t flash_support;			/* Enable/disable flash
+						support */
+	uint8_t privacy_led;			/* Privacy LED support */
+	uint8_t degree;				/* Camera Orientation */
+	uint8_t mipi_define;			/* MIPI info defined in ACPI or
+						sensor driver */
+	uint32_t mclk_speed;			/* Clock info for sensor */
+	uint8_t control_logic_id;		/* PMIC device node used for
+						the camera sensor */
+	uint8_t mipi_data_format;		/* MIPI data format */
+	uint8_t silicon_version;		/* Silicon version */
+	uint8_t customer_id;			/* Customer ID */
+	uint8_t mclk_port;
+	uint8_t reserved[13];			/* Pads SSDB out so the binary blob in ACPI is
+						   the same size as seen on other firmwares.*/
+} __packed;
+
+#endif