From 9dfbc3dcea5faf4c35a638f1a5705882f69f23f3 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Thu, 25 Jul 2002 03:11:45 +0000 Subject: [PATCH] Add example config files for the s2462 --- .../tyan/guiness/example-fallback.config | 85 ++++++++++++++++++ .../tyan/guiness/example-normal.config | 89 +++++++++++++++++++ 2 files changed, 174 insertions(+) create mode 100644 src/mainboard/tyan/guiness/example-fallback.config create mode 100644 src/mainboard/tyan/guiness/example-normal.config diff --git a/src/mainboard/tyan/guiness/example-fallback.config b/src/mainboard/tyan/guiness/example-fallback.config new file mode 100644 index 0000000000..03b8e98fc8 --- /dev/null +++ b/src/mainboard/tyan/guiness/example-fallback.config @@ -0,0 +1,85 @@ +## This will make a target directory of ./fallback +## This is relative to where the configuration file resides in the filesystem +target ./tdir/fallback + +mainboard tyan/guiness + + +## Build a normal not a fallback image. +option USE_FALLBACK_IMAGE=1 + +## Build an image for a 512KB rom +## ./normal/romimage is the entire rom image except for the last 64KB +## which are reserved for the fallback image. +#option ROM_SIZE=524288 +option ROM_SIZE=262144 + +## Select the maximum size the linuxBIOS code can compile to. +## Allow linuxBIOS to be up to 48KB in size +option ROM_IMAGE_SIZE=45056 + +## +### The Serial Console +## +## Hardware flow control is currently ignored. + +## Enable the Serial Console +option SERIAL_CONSOLE=1 + +## Select the serial console baud rate. +#option TTYS0_BAUD=115200 +#option TTYS0_BAUD=57600 +#option TTYS0_BAUD=38400 +#option TTYS0_BAUD=19200 +option TTYS0_BAUD=9600 +#option TTYS0_BAUD=4800 +#option TTYS0_BAUD=2400 +#option TTYS0_BAUD=1200 + +# Select the serial console base port +option TTYS0_BASE=0x3f8 + +# Select the serial protocol +# This defaults to 8 data bits, 1 stop bit, and no parity +option TTYS0_LCS=0x3 + +## +### Select the linuxBIOS loglevel +## +## EMERG 1 system is unusable +## ALERT 2 action must be taken immediately +## CRIT 3 critical conditions +## ERR 4 error conditions +## WARNING 5 warning conditions +## NOTICE 6 normal but significant condition +## INFO 7 informational +## DEBUG 8 debug-level messages +## SPEW 9 Way too many details + +## Request this level of debugging output +option DEFAULT_CONSOLE_LOGLEVEL=8 +## At a maximum only compile in this level of debugging +option MAXIMUM_CONSOLE_LOGLEVEL=7 + +## Use the elf bootloader +option USE_ELF_BOOT=1 + +## Select the boot device +option USE_GENERIC_ROM=1 +#option BOOT_FLOPPY=1 +#option USE_SERIAL_FILL_INBUF=1 +#option BOOT_IDE=1 + +# Load etherboot with the elf bootloader +# The payload command is relative the build directory +# So .. is the directory this config file resides in +payload ./bootloader.ebi + +# Path to your kernel (vmlinux) +# NOTE; you need a path to your test12 kernel here. +linux ~/projects/linux/linux-2.4.4.eb1.1 + +# Kernel command line parameters +#commandline ro panic=5 root=/dev/hda5 console=ttyS0,115200 debug 3 + + diff --git a/src/mainboard/tyan/guiness/example-normal.config b/src/mainboard/tyan/guiness/example-normal.config new file mode 100644 index 0000000000..143ba703a1 --- /dev/null +++ b/src/mainboard/tyan/guiness/example-normal.config @@ -0,0 +1,89 @@ +# This will make a target directory of ./normal +## This is relative to where the configuration file resides in the filesystem +target ./tdir/normal + +mainboard tyan/guiness + +## Build a normal not a fallback image. +option USE_FALLBACK_IMAGE=0 + +## Build an image for a 512KB rom +## ./normal/romimage is the entire rom image except for the last 64KB +## which are reserved for the fallback image. +#option ROM_SIZE=524288 +option ROM_SIZE=262144 + +## Select the maximum size the linuxBIOS code can compile to. +## Allow linuxBIOS to be up to 48KB in size +#option ROM_IMAGE_SIZE=49152 +option ROM_IMAGE_SIZE=65536 +#option PAYLOAD_SIZE=131072 +#option _ROMBASE=0xFFFE0000 +#option ZKERNEL_START=0xFFFC0000 + + +## +### The Serial Console +## +## Hardware flow control is currently ignored. + +## Enable the Serial Console +option SERIAL_CONSOLE=1 + +## Select the serial console baud rate. +#option TTYS0_BAUD=115200 +#option TTYS0_BAUD=57600 +#option TTYS0_BAUD=38400 +#option TTYS0_BAUD=19200 +option TTYS0_BAUD=9600 +#option TTYS0_BAUD=4800 +#option TTYS0_BAUD=2400 +#option TTYS0_BAUD=1200 + +# Select the serial console base port +option TTYS0_BASE=0x3f8 + +# Select the serial protocol +# This defaults to 8 data bits, 1 stop bit, and no parity +option TTYS0_LCS=0x3 + +## +### Select the linuxBIOS loglevel +## +## EMERG 1 system is unusable +## ALERT 2 action must be taken immediately +## CRIT 3 critical conditions +## ERR 4 error conditions +## WARNING 5 warning conditions +## NOTICE 6 normal but significant condition +## INFO 7 informational +## DEBUG 8 debug-level messages +## SPEW 9 Way too many details + +## Request this level of debugging output +option DEFAULT_CONSOLE_LOGLEVEL=7 +## At a maximum only compile in this level of debugging +option MAXIMUM_CONSOLE_LOGLEVEL=8 + +## Use the elf bootloader +option USE_ELF_BOOT=1 + +## Select the boot device +option USE_GENERIC_ROM=1 +#option BOOT_FLOPPY=1 +#option USE_SERIAL_FILL_INBUF=1 +#option BOOT_IDE=1 + +# Load etherboot with the elf bootloader +# The payload command is relative the build directory +# So .. is the directory this config file resides in +payload ./bootloader.ebi + +# Path to your kernel (vmlinux) +# NOTE; you need a path to your test12 kernel here. +linux ~/projects/linux/linux-2.4.4.eb1.1 + +# Kernel command line parameters +#commandline ro panic=5 root=/dev/hda5 console=ttyS0,115200 debug 3 + +