nb/intel/haswell: Consolidate memory-down SPD handling

Mainboards do not need to know about `pei_data` to tell northbridge code
where to find the SPD data. Adjust `mb_get_spd_map` to take a pointer to
a struct instead of an array, and update all the mainboards accordingly.

Currently, the only board with memory-down in the tree is google/slippy.
Mainboard code now obtains the SPD index in `mb_get_spd_map` and adjusts
the channel population accordingly. Then, northbridge code reads the SPD
file and uses the index that was read in `mb_get_spd_map`, and copies it
to channel 0 slot 0 unconditionally. MRC only uses the first position of
the `spd_data` array, and ignores the other positions. In coreboot code,
`setup_sdram_meminfo` uses the data of each SPD index, so `copy_spd` has
to account for this.

Tested on Asrock B85M Pro4, still boots and still resumes from S3.

Change-Id: Ibaed5c6de9853db6abd08f53bbfda8800d207c3e
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51448
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

src/mainboard/asrock/b85m_pro4/romstage.c

@@ -17,12 +17,12 @@ void mainboard_config_rcba(void)
 	RCBA16(D20IR) = DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD);
 }
 
-void mb_get_spd_map(uint8_t spd_map[4])
+void mb_get_spd_map(struct spd_info *spdi)
 {
-	spd_map[0] = 0xa0;
-	spd_map[1] = 0xa2;
-	spd_map[2] = 0xa4;
-	spd_map[3] = 0xa6;
+	spdi->addresses[0] = 0xa0;
+	spdi->addresses[1] = 0xa2;
+	spdi->addresses[2] = 0xa4;
+	spdi->addresses[3] = 0xa6;
 }
 
 const struct usb2_port_setting mainboard_usb2_ports[MAX_USB2_PORTS] = {

src/mainboard/asrock/h81m-hds/romstage.c

@@ -17,10 +17,10 @@ void mainboard_config_rcba(void)
 	RCBA16(D20IR) = DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD);
 }
 
-void mb_get_spd_map(uint8_t spd_map[4])
+void mb_get_spd_map(struct spd_info *spdi)
 {
-	spd_map[0] = 0xa0;
-	spd_map[2] = 0xa4;
+	spdi->addresses[0] = 0xa0;
+	spdi->addresses[2] = 0xa4;
 }
 
 const struct usb2_port_setting mainboard_usb2_ports[MAX_USB2_PORTS] = {

src/mainboard/google/beltino/romstage.c

@@ -40,10 +40,10 @@ void mainboard_config_rcba(void)
 	RCBA16(D23IR) = DIR_ROUTE(PIRQH, PIRQH, PIRQH, PIRQH); /* SDIO */
 }
 
-void mb_get_spd_map(uint8_t spd_map[4])
+void mb_get_spd_map(struct spd_info *spdi)
 {
-	spd_map[0] = 0xa0;
-	spd_map[2] = 0xa4;
+	spdi->addresses[0] = 0xa0;
+	spdi->addresses[2] = 0xa4;
 }
 
 const struct usb2_port_setting mainboard_usb2_ports[MAX_USB2_PORTS] = {

src/mainboard/google/slippy/romstage.c

@@ -1,12 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0-only */
 
-#include <cbfs.h>
-#include <console/console.h>
-#include <northbridge/intel/haswell/haswell.h>
 #include <northbridge/intel/haswell/raminit.h>
 #include <southbridge/intel/lynxpoint/pch.h>
-#include <string.h>
-#include <types.h>
 
 #include "variant.h"
 
@@ -45,31 +40,9 @@ void mainboard_config_rcba(void)
 	RCBA16(D23IR) = DIR_ROUTE(PIRQH, PIRQH, PIRQH, PIRQH); /* SDIO */
 }
 
-void mb_get_spd_map(uint8_t spd_map[4])
+void mb_get_spd_map(struct spd_info *spdi)
 {
-	spd_map[0] = 0xff;
-	spd_map[2] = 0xff;
-}
-
-unsigned int fill_spd_for_index(uint8_t spd[], unsigned int spd_index)
-{
-	uint8_t *spd_file;
-	size_t spd_file_len;
-
-	printk(BIOS_DEBUG, "SPD index %d\n", spd_index);
-	spd_file = cbfs_map("spd.bin", &spd_file_len);
-	if (!spd_file)
-		die("SPD data not found.");
-
-	if (spd_file_len < ((spd_index + 1) * SPD_LEN)) {
-		printk(BIOS_ERR, "SPD index override to 0 - old hardware?\n");
-		spd_index = 0;
-	}
-
-	if (spd_file_len < SPD_LEN)
-		die("Missing SPD data.");
-
-	memcpy(spd, spd_file + (spd_index * SPD_LEN), SPD_LEN);
-
-	return spd_index;
+	spdi->spd_index = variant_get_spd_index();
+	spdi->addresses[0] = SPD_MEMORY_DOWN;
+	spdi->addresses[2] = variant_is_dual_channel(spdi->spd_index) ? SPD_MEMORY_DOWN : 0;
 }

src/mainboard/google/slippy/variant.h

@@ -3,8 +3,9 @@
 #ifndef VARIANT_H
 #define VARIANT_H
 
-#include <stdint.h>
+#include <types.h>
 
-unsigned int fill_spd_for_index(uint8_t spd[], unsigned int index);
+unsigned int variant_get_spd_index(void);
+bool variant_is_dual_channel(const unsigned int spd_index);
 
 #endif

src/mainboard/google/slippy/variants/falco/romstage.c

@@ -6,22 +6,22 @@
 #include <southbridge/intel/lynxpoint/lp_gpio.h>
 #include "../../variant.h"
 
-/* Copy SPD data for on-board memory */
-void copy_spd(struct pei_data *peid)
+unsigned int variant_get_spd_index(void)
 {
 	const int gpio_vector[] = {13, 9, 47, -1};
+	return get_gpios(gpio_vector);
+}
 
-	unsigned int spd_index = fill_spd_for_index(peid->spd_data[0], get_gpios(gpio_vector));
-
+bool variant_is_dual_channel(const unsigned int spd_index)
+{
 	/* Index 0-2,6 are 4GB config with both CH0 and CH1
-	 * Index 3-5,7 are 2GB config with CH0 only
-	 */
+	   Index 3-5,7 are 2GB config with CH0 only */
 	switch (spd_index) {
 	case 0: case 1: case 2: case 6:
-		memcpy(peid->spd_data[2], peid->spd_data[0], SPD_LEN);
-		break;
+		return true;
 	case 3: case 4: case 5: case 7:
-		peid->dimm_channel1_disabled = 3;
+	default:
+		return false;
 	}
 }
 

src/mainboard/google/slippy/variants/leon/romstage.c

@@ -6,20 +6,17 @@
 #include <southbridge/intel/lynxpoint/lp_gpio.h>
 #include "../../variant.h"
 
-/* Copy SPD data for on-board memory */
-void copy_spd(struct pei_data *peid)
+unsigned int variant_get_spd_index(void)
 {
 	const int gpio_vector[] = {13, 9, 47, -1};
+	return get_gpios(gpio_vector);
+}
 
-	unsigned int spd_index = fill_spd_for_index(peid->spd_data[0], get_gpios(gpio_vector));
-
+bool variant_is_dual_channel(const unsigned int spd_index)
+{
 	/* Limiting to a single dimm for 2GB configuration
-	 * Identified by bit 3
-	 */
-	if (spd_index & 0x4)
-		peid->dimm_channel1_disabled = 3;
-	else
-		memcpy(peid->spd_data[2], peid->spd_data[0], SPD_LEN);
+	   Identified by bit 2 */
+	return !(spd_index & 0x4);
 }
 
 const struct usb2_port_setting mainboard_usb2_ports[MAX_USB2_PORTS] = {

src/mainboard/google/slippy/variants/peppy/romstage.c

@@ -9,33 +9,26 @@
 #include "../../onboard.h"
 #include "../../variant.h"
 
-/* Copy SPD data for on-board memory */
-void copy_spd(struct pei_data *peid)
+unsigned int variant_get_spd_index(void)
 {
 	const int gpio_vector[] = {13, 9, 47, -1};
+	return get_gpios(gpio_vector);
+}
 
-	unsigned int spd_index = fill_spd_for_index(peid->spd_data[0], get_gpios(gpio_vector));
-
+bool variant_is_dual_channel(const unsigned int spd_index)
+{
 	uint32_t board_version = PEPPY_BOARD_VERSION_PROTO;
 	google_chromeec_get_board_version(&board_version);
 	switch (board_version) {
 	case PEPPY_BOARD_VERSION_PROTO:
 		/* Index 0 is 2GB config with CH0 only. */
-		if (spd_index == 0)
-			peid->dimm_channel1_disabled = 3;
-		else
-			memcpy(peid->spd_data[2], peid->spd_data[0], SPD_LEN);
-		break;
+		return spd_index != 0;
 
 	case PEPPY_BOARD_VERSION_EVT:
 	default:
 		/* Index 0-3 are 4GB config with both CH0 and CH1.
-		 * Index 4-7 are 2GB config with CH0 only. */
-		if (spd_index > 3)
-			peid->dimm_channel1_disabled = 3;
-		else
-			memcpy(peid->spd_data[2], peid->spd_data[0], SPD_LEN);
-		break;
+		   Index 4-7 are 2GB config with CH0 only. */
+		return spd_index <= 3;
 	}
 }
 

src/mainboard/google/slippy/variants/wolf/romstage.c

@@ -6,22 +6,22 @@
 #include <southbridge/intel/lynxpoint/lp_gpio.h>
 #include "../../variant.h"
 
-/* Copy SPD data for on-board memory */
-void copy_spd(struct pei_data *peid)
+unsigned int variant_get_spd_index(void)
 {
 	const int gpio_vector[] = {13, 9, 47, -1};
+	return get_gpios(gpio_vector);
+}
 
-	unsigned int spd_index = fill_spd_for_index(peid->spd_data[0], get_gpios(gpio_vector));
-
-	/* Index 0-2, are 4GB config with both CH0 and CH1
-	 * Index 3-5, are 2GB config with CH0 only
-	 */
+bool variant_is_dual_channel(const unsigned int spd_index)
+{
+	/* Index 0-2 are 4GB config with both CH0 and CH1
+	   Index 3-5 are 2GB config with CH0 only */
 	switch (spd_index) {
 	case 0: case 1: case 2:
-		memcpy(peid->spd_data[2], peid->spd_data[0], SPD_LEN);
-		break;
+		return true;
 	case 3: case 4: case 5:
-		peid->dimm_channel1_disabled = 3;
+	default:
+		return false;
 	}
 }
 

src/mainboard/hp/folio_9480m/romstage.c

@@ -17,10 +17,10 @@ void mainboard_config_rcba(void)
 	RCBA16(D20IR) = DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD);
 }
 
-void mb_get_spd_map(uint8_t spd_map[4])
+void mb_get_spd_map(struct spd_info *spdi)
 {
-	spd_map[0] = 0xa0;
-	spd_map[2] = 0xa4;
+	spdi->addresses[0] = 0xa0;
+	spdi->addresses[2] = 0xa4;
 }
 
 const struct usb2_port_setting mainboard_usb2_ports[MAX_USB2_PORTS] = {

src/mainboard/intel/baskingridge/romstage.c

@@ -41,12 +41,12 @@ void mainboard_config_rcba(void)
 	RCBA16(D22IR) = DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD);
 }
 
-void mb_get_spd_map(uint8_t spd_map[4])
+void mb_get_spd_map(struct spd_info *spdi)
 {
-	spd_map[0] = 0xa0;
-	spd_map[1] = 0xa2;
-	spd_map[2] = 0xa4;
-	spd_map[3] = 0xa6;
+	spdi->addresses[0] = 0xa0;
+	spdi->addresses[1] = 0xa2;
+	spdi->addresses[2] = 0xa4;
+	spdi->addresses[3] = 0xa6;
 }
 
 const struct usb2_port_setting mainboard_usb2_ports[MAX_USB2_PORTS] = {

src/mainboard/lenovo/t440p/romstage.c

@@ -40,10 +40,10 @@ void mb_late_romstage_setup(void)
 	}
 }
 
-void mb_get_spd_map(uint8_t spd_map[4])
+void mb_get_spd_map(struct spd_info *spdi)
 {
-	spd_map[0] = 0xa0;
-	spd_map[2] = 0xa2;
+	spdi->addresses[0] = 0xa0;
+	spdi->addresses[2] = 0xa2;
 }
 
 const struct usb2_port_setting mainboard_usb2_ports[MAX_USB2_PORTS] = {

src/mainboard/msi/h81m-p33/romstage.c

@@ -17,10 +17,10 @@ void mainboard_config_rcba(void)
 	RCBA16(D20IR) = DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD);
 }
 
-void mb_get_spd_map(uint8_t spd_map[4])
+void mb_get_spd_map(struct spd_info *spdi)
 {
-	spd_map[0] = 0xa0;
-	spd_map[2] = 0xa4;
+	spdi->addresses[0] = 0xa0;
+	spdi->addresses[2] = 0xa4;
 }
 
 const struct usb2_port_setting mainboard_usb2_ports[MAX_USB2_PORTS] = {

src/mainboard/supermicro/x10slm-f/romstage.c

@@ -17,12 +17,12 @@ void mainboard_config_rcba(void)
 	RCBA16(D20IR) = DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD);
 }
 
-void mb_get_spd_map(uint8_t spd_map[4])
+void mb_get_spd_map(struct spd_info *spdi)
 {
-	spd_map[0] = 0xa0;
-	spd_map[1] = 0xa2;
-	spd_map[2] = 0xa4;
-	spd_map[3] = 0xa6;
+	spdi->addresses[0] = 0xa0;
+	spdi->addresses[1] = 0xa2;
+	spdi->addresses[2] = 0xa4;
+	spdi->addresses[3] = 0xa6;
 }
 
 const struct usb2_port_setting mainboard_usb2_ports[MAX_USB2_PORTS] = {