fix stupid typo in NGLConfig.py

sample files for tftp

src/mainboard/matsonic/ms7308e/example.tftpboot.config

@@ -0,0 +1,35 @@
+# This will make a target directory of ./winfast
+# Note that this is RELATIVE TO WHERE YOU ARE WHEN YOU RUN THE 
+# CONFIG TOOL. Make it absolute if you like
+target ms7308e.tftpboot 
+
+mainboard matsonic/ms7308e
+
+# Enable Serial Console for debugging
+# It will come up at 115200,8n1
+option SERIAL_CONSOLE
+
+# Enable MicroCode update and L2 Cache init for PII and PIII
+#option UPDATE_MICROCODE
+#option CONFIGURE_L2_CACHE
+
+# Use the internal VGA frame buffer device
+option HAVE_FRAMEBUFFER
+
+# Path to your kernel (vmlinux)
+# NOTE; you need a path to your test12 kernel here. 
+linux /usr/src/linux-2.2.17-beoboot-pyro1
+#linux /usr/src/linux-2.4.0-test12
+
+# Kernel command line parameters
+commandline root=/dev/nftla1
+
+# We're using disk on chip. Tell it where to find the docipl code
+docipl northsouthbridge/sis/730/ipl.S
+
+#option USE_DOC_MIL
+
+option STD_FLASH
+etherboot sis900
+
+

src/mainboard/pcchips/m810lmr/example.tftpboot.config

@@ -0,0 +1,36 @@
+# This will make a target directory of ./winfast
+# Note that this is RELATIVE TO WHERE YOU ARE WHEN YOU RUN THE 
+# CONFIG TOOL. Make it absolute if you like
+target m810lmr 
+
+# Leadtek WinFast 6300 MAX mainboard
+mainboard pcchips/m810lmr
+
+# Enable Serial Console for debugging
+# It will come up at 115200,8n1
+option SERIAL_CONSOLE
+
+# Enable MicroCode update and L2 Cache init for PII and PIII
+#option UPDATE_MICROCODE
+#option CONFIGURE_L2_CACHE
+
+# Use the internal VGA frame buffer device
+option HAVE_FRAMEBUFFER
+
+# Path to your kernel (vmlinux)
+# NOTE; you need a path to your test12 kernel here. 
+linux /usr/src/linux-2.2.17-beoboot-pyro1
+#linux /usr/src/linux-2.4.0-test12
+
+# Kernel command line parameters
+commandline root=/dev/nftla1
+
+# We're using disk on chip. Tell it where to find the docipl code
+docipl northsouthbridge/sis/730/ipl.S
+
+#option USE_DOC_MIL
+
+option STD_FLASH
+etherboot sis900
+
+