diff --git a/src/include/mipi/panel.h b/src/include/mipi/panel.h
index cc5a065d02..938f87dc3b 100644
--- a/src/include/mipi/panel.h
+++ b/src/include/mipi/panel.h
@@ -26,6 +26,191 @@ struct panel_init_command {
 	u8 data[];
 };
 
+/* VESA Display Stream Compression DSC 1.2 constants */
+#define DSC_NUM_BUF_RANGES			15
+
+/*
+ * struct dsc_rc_range_parameters - DSC Rate Control range parameters
+ *
+ * This defines different rate control parameters used by the DSC engine
+ * to compress the frame.
+ */
+struct dsc_rc_range_parameters {
+	/*
+	 * @range_min_qp: Min Quantization Parameters allowed for this range
+	 */
+	u8 range_min_qp;
+	/*
+	 * @range_max_qp: Max Quantization Parameters allowed for this range
+	 */
+	u8 range_max_qp;
+	/*
+	 * @range_bpg_offset:
+	 * Bits/group offset to apply to target for this group
+	 */
+	u8 range_bpg_offset;
+};
+
+struct dsc_config {
+	/*
+	 * @convert_rgb:
+	 * Flag to indicate if RGB - YCoCg conversion is needed
+	 * True if RGB input, False if YCoCg input
+	 */
+	u8 convert_rgb : 1;
+		/*
+	 * @simple_422: True if simple 4_2_2 mode is enabled else False
+	 */
+	u8 simple_422 : 1;
+	/*
+	 * @block_pred_enable:
+	 * True if block prediction is used to code any groups within the
+	 * picture. False if BP not used
+	 */
+	u8 block_pred_enable : 1;
+	/*
+	 * @line_buf_depth:
+	 * Bits per component for previous reconstructed line buffer
+	 */
+	u8 line_buf_depth;
+	/*
+	 * @bits_per_component: Bits per component to code (8/10/12)
+	 */
+	u8 bits_per_component;
+	/*
+	 *  @slice_width: Width of each slice in pixels
+	 */
+	u16 slice_width;
+	/*
+	 * @slice_height: Slice height in pixels
+	 */
+	u16 slice_height;
+	/*
+	 * @pic_width: Width of the input display frame in pixels
+	 */
+	u16 pic_width;
+	/*
+	 * @pic_height: Vertical height of the input display frame
+	 */
+	u16 pic_height;
+	/*
+	 * @rc_tgt_offset_high:
+	 * Offset to bits/group used by RC to determine QP adjustment
+	 */
+	u8 rc_tgt_offset_high;
+	/*
+	 * @rc_tgt_offset_low:
+	 * Offset to bits/group used by RC to determine QP adjustment
+	 */
+	u8 rc_tgt_offset_low;
+	/*
+	 * @bits_per_pixel:
+	 * Target bits per pixel with 4 fractional bits, bits_per_pixel << 4
+	 */
+	u16 bits_per_pixel;
+	/*
+	 * @rc_edge_factor:
+	 * Factor to determine if an edge is present based on the bits produced
+	 */
+	u8 rc_edge_factor;
+	/*
+	 * @rc_quant_incr_limit1:
+	 * Slow down incrementing once the range reaches this value
+	 */
+	u8 rc_quant_incr_limit1;
+	/*
+	 * @rc_quant_incr_limit0:
+	 * Slow down incrementing once the range reaches this value
+	 */
+	u8 rc_quant_incr_limit0;
+	/*
+	 * @initial_xmit_delay:
+	 * Number of pixels to delay the initial transmission
+	 */
+	u16 initial_xmit_delay;
+	/*
+	 * @initial_dec_delay:
+	 * Initial decoder delay, number of pixel times that the decoder
+	 * accumulates data in its rate buffer before starting to decode
+	 * and output pixels.
+	 */
+	u16 initial_dec_delay;
+	/*
+	 * @first_line_bpg_offset:
+	 * Number of additional bits allocated for each group on the first
+	 * line of slice.
+	 */
+	u8 first_line_bpg_offset;
+	/*
+	 * @initial_offset: Value to use for RC model offset at slice start
+	 */
+	u16 initial_offset;
+	/*
+	 * @rc_buf_thresh: Thresholds defining each of the buffer ranges
+	 */
+	u16 rc_buf_thresh[DSC_NUM_BUF_RANGES - 1];
+	/*
+	 * @rc_range_params:
+	 * Parameters for each of the RC ranges defined in
+	 * &struct dsc_rc_range_parameters
+	 */
+	struct dsc_rc_range_parameters rc_range_params[DSC_NUM_BUF_RANGES];
+	/*
+	 * @rc_model_size: Total size of RC model
+	 */
+	u16 rc_model_size;
+	/*
+	 * @flatness_min_qp: Minimum QP where flatness information is sent
+	 */
+	u8 flatness_min_qp;
+	/*
+	 * @flatness_max_qp: Maximum QP where flatness information is sent
+	 */
+	u8 flatness_max_qp;
+	/*
+	 * @initial_scale_value: Initial value for the scale factor
+	 */
+	u8 initial_scale_value;
+	/*
+	 * @scale_decrement_interval:
+	 * Specifies number of group times between decrementing the scale factor
+	 * at beginning of a slice.
+	 */
+	u16 scale_decrement_interval;
+	/*
+	 * @scale_increment_interval:
+	 * Number of group times between incrementing the scale factor value
+	 * used at the beginning of a slice.
+	 */
+	u16 scale_increment_interval;
+	/*
+	 * @nfl_bpg_offset: Non first line BPG offset to be used
+	 */
+	u16 nfl_bpg_offset;
+	/*
+	 * @slice_bpg_offset: BPG offset used to enforce slice bit
+	 */
+	u16 slice_bpg_offset;
+	/*
+	 * @final_offset: Final RC linear transformation offset value
+	 */
+	u16 final_offset;
+	/*
+	 * @slice_chunk_size:
+	 * The (max) size in bytes of the "chunks" that are used in slice
+	 * multiplexing.
+	 */
+	u16 slice_chunk_size;
+	/*
+	 * @dsc_version_minor: DSC minor version
+	 */
+	u8 dsc_version_minor;
+	/*
+	 * @dsc_version_major: DSC major version
+	 */
+	u8 dsc_version_major;
+};
+
 /*
  * The data to be serialized and put into CBFS.
  * Note some fields, for example edid.mode.name, were actually pointers and
@@ -34,6 +219,7 @@ struct panel_init_command {
 struct panel_serializable_data {
 	u32 flags; /* flags of panel_flag */
 	struct edid edid;  /* edid info of this panel */
+	struct dsc_config dsc_config; /* dsc config of this panel */
 	u8 init[]; /* A packed array of panel_init_command */
 };