mb/google/nissa/var/guren: Add initial override devicetree
The schematic is the same as Glassway project and only difference for CPU. Therefore, we clone the coreboot settings of glassway to guren then remove some configurations to meet those keypart/design for guren. BUG=b:397149037 BRANCH=firmware-nissa-15217.B TEST=Local build successfully and boot to OOBE normally. Change-Id: Ia43a78c340426069571172319be1675b3d94eba4 Signed-off-by: Brian Hsu <Brian_Hsu@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/86602 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com>
This commit is contained in:
Brian Hsu
Subrata Banik
parent
5cc8685fcd
commit
0870f977c8
9 changed files with 847 additions and 2 deletions
|
|
@ -297,6 +297,15 @@ config BOARD_GOOGLE_GOTHRAX
|
|||
|
||||
config BOARD_GOOGLE_GUREN
|
||||
select BOARD_GOOGLE_BASEBOARD_NISSA
|
||||
select CHROMEOS_WIFI_SAR if CHROMEOS
|
||||
select DRIVERS_GENERIC_GPIO_KEYS
|
||||
select DRIVERS_GENESYSLOGIC_GL9750
|
||||
select DRIVERS_I2C_SX9324
|
||||
select DRIVERS_I2C_SX9324_SUPPORT_LEGACY_LINUX_DRIVER
|
||||
select EC_GOOGLE_CHROMEEC_INCLUDE_SSFC_IN_FW_CONFIG
|
||||
select HAVE_WWAN_POWER_SEQUENCE
|
||||
select INTEL_GMA_HAVE_VBT
|
||||
select SOC_INTEL_TWINLAKE
|
||||
|
||||
config BOARD_GOOGLE_HADES
|
||||
select BOARD_GOOGLE_BASEBOARD_HADES
|
||||
|
|
|
|||
11
src/mainboard/google/brya/variants/guren/Makefile.mk
Normal file
11
src/mainboard/google/brya/variants/guren/Makefile.mk
Normal file
|
|
@ -0,0 +1,11 @@
|
|||
# SPDX-License-Identifier: GPL-2.0-only
|
||||
bootblock-y += gpio.c
|
||||
|
||||
romstage-y += gpio.c
|
||||
|
||||
ramstage-$(CONFIG_FW_CONFIG) += fw_config.c
|
||||
ramstage-y += gpio.c
|
||||
|
||||
ramstage-y += variant.c
|
||||
|
||||
ramstage-y += ramstage.c
|
||||
BIN
src/mainboard/google/brya/variants/guren/data.vbt
Normal file
BIN
src/mainboard/google/brya/variants/guren/data.vbt
Normal file
Binary file not shown.
45
src/mainboard/google/brya/variants/guren/fw_config.c
Normal file
45
src/mainboard/google/brya/variants/guren/fw_config.c
Normal file
|
|
@ -0,0 +1,45 @@
|
|||
/* SPDX-License-Identifier: GPL-2.0-or-later */
|
||||
|
||||
#include <baseboard/gpio.h>
|
||||
#include <baseboard/variants.h>
|
||||
#include <console/console.h>
|
||||
#include <fw_config.h>
|
||||
|
||||
static const struct pad_config hdmi_disable_pads[] = {
|
||||
/* A20 : DDSP_HPD2 ==> NC */
|
||||
PAD_NC_LOCK(GPP_A20, NONE, LOCK_CONFIG),
|
||||
/* E20 : DDP2_CTRLCLK ==> NC */
|
||||
PAD_NC_LOCK(GPP_E20, NONE, LOCK_CONFIG),
|
||||
/* E21 : DDP2_CTRLDATA ==> NC */
|
||||
PAD_NC_LOCK(GPP_E21, NONE, LOCK_CONFIG),
|
||||
};
|
||||
|
||||
static const struct pad_config lte_disable_pads[] = {
|
||||
/* A8 : WWAN_RF_DISABLE_ODL */
|
||||
PAD_NC(GPP_A8, NONE),
|
||||
/* D6 : WWAN_EN */
|
||||
PAD_NC(GPP_D6, NONE),
|
||||
/* F12 : WWAN_RST_L */
|
||||
PAD_NC_LOCK(GPP_F12, NONE, LOCK_CONFIG),
|
||||
/* H19 : SOC_I2C_SUB_INT_ODL */
|
||||
PAD_NC(GPP_H19, NONE),
|
||||
/* H23 : WWAN_SAR_DETECT_ODL */
|
||||
PAD_NC(GPP_H23, NONE),
|
||||
};
|
||||
|
||||
void fw_config_gpio_padbased_override(struct pad_config *padbased_table)
|
||||
{
|
||||
if (!fw_config_probe(FW_CONFIG(DB_USB, DB_HDMI_LTE))) {
|
||||
printk(BIOS_INFO, "Disable HDMI GPIO pins.\n");
|
||||
gpio_padbased_override(padbased_table, hdmi_disable_pads,
|
||||
ARRAY_SIZE(hdmi_disable_pads));
|
||||
}
|
||||
|
||||
/* Set to Disable LTE-related GPIO pins when field DB_USB is not DB_1C_LTE and DB_HDMI_LTE. */
|
||||
if (!fw_config_probe(FW_CONFIG(DB_USB, DB_1C_LTE))
|
||||
&& !fw_config_probe(FW_CONFIG(DB_USB, DB_HDMI_LTE))) {
|
||||
printk(BIOS_INFO, "Disable LTE GPIO pins.\n");
|
||||
gpio_padbased_override(padbased_table, lte_disable_pads,
|
||||
ARRAY_SIZE(lte_disable_pads));
|
||||
}
|
||||
}
|
||||
120
src/mainboard/google/brya/variants/guren/gpio.c
Normal file
120
src/mainboard/google/brya/variants/guren/gpio.c
Normal file
|
|
@ -0,0 +1,120 @@
|
|||
/* SPDX-License-Identifier: GPL-2.0-or-later */
|
||||
|
||||
#include <baseboard/gpio.h>
|
||||
#include <baseboard/variants.h>
|
||||
#include <soc/gpio.h>
|
||||
|
||||
/* Pad configuration in ramstage for guren */
|
||||
static const struct pad_config override_gpio_table[] = {
|
||||
/* A8 : WWAN_RF_DISABLE_ODL */
|
||||
PAD_CFG_GPO(GPP_A8, 1, DEEP),
|
||||
/* D3 : ISH_GP3 ==> NC */
|
||||
PAD_NC_LOCK(GPP_D3, NONE, LOCK_CONFIG),
|
||||
/* D6 : WWAN_EN */
|
||||
PAD_CFG_GPO(GPP_D6, 1, DEEP),
|
||||
/* D7 : SRCCLKREQ2# ==> WLAN_CLKREQ_ODL */
|
||||
PAD_CFG_NF(GPP_D7, NONE, DEEP, NF1),
|
||||
/* D15 : ISH_UART0_RTS# ==> NC */
|
||||
PAD_NC_LOCK(GPP_D15, NONE, LOCK_CONFIG),
|
||||
/* D16 : ISH_UART0_CTS# ==> NC */
|
||||
PAD_NC_LOCK(GPP_D16, NONE, LOCK_CONFIG),
|
||||
/* D17 : PCIE SLOT1 WAKE N */
|
||||
PAD_NC_LOCK(GPP_D17, NONE, LOCK_CONFIG),
|
||||
/* E4 : SDD_STRAP1 */
|
||||
PAD_CFG_GPI(GPP_E4, NONE, DEEP),
|
||||
/* E5 : SDD_STRAP2 */
|
||||
PAD_CFG_GPI(GPP_E5, NONE, DEEP),
|
||||
/* F12 : WWAN_RST_L */
|
||||
PAD_CFG_GPO_LOCK(GPP_F12, 1, LOCK_CONFIG),
|
||||
/* F13 : GSXSLOAD ==> NC */
|
||||
PAD_NC_LOCK(GPP_F13, NONE, LOCK_CONFIG),
|
||||
/* F15 : GSXSRESET# ==> NC */
|
||||
PAD_NC_LOCK(GPP_F15, NONE, LOCK_CONFIG),
|
||||
/* H19 : SOC_I2C_SUB_INT_ODL */
|
||||
PAD_CFG_GPI_APIC(GPP_H19, NONE, PLTRST, LEVEL, NONE),
|
||||
/* H22 : IMGCLKOUT3 ==> NC */
|
||||
PAD_NC_LOCK(GPP_H22, NONE, LOCK_CONFIG),
|
||||
/* H23 : WWAN_SAR_DETECT_ODL */
|
||||
PAD_CFG_GPO(GPP_H23, 1, DEEP),
|
||||
/* R4 : I2S2_SCLK ==> DMIC_UCAM_CLK_R */
|
||||
PAD_CFG_NF(GPP_R4, NONE, DEEP, NF3),
|
||||
/* R5 : I2S2_SFRM ==> DMIC_UCAM_DATA_R */
|
||||
PAD_CFG_NF(GPP_R5, NONE, DEEP, NF3),
|
||||
/* R6 : DMIC_CLK_A_1A ==> NC */
|
||||
PAD_NC_LOCK(GPP_R6, NONE, LOCK_CONFIG),
|
||||
|
||||
/* Configure the virtual CNVi Bluetooth I2S GPIO pads */
|
||||
/* BT_I2S_BCLK */
|
||||
PAD_CFG_NF(GPP_VGPIO_30, NONE, DEEP, NF3),
|
||||
/* BT_I2S_SYNC */
|
||||
PAD_CFG_NF(GPP_VGPIO_31, NONE, DEEP, NF3),
|
||||
/* BT_I2S_SDO */
|
||||
PAD_CFG_NF(GPP_VGPIO_32, NONE, DEEP, NF3),
|
||||
/* BT_I2S_SDI */
|
||||
PAD_CFG_NF(GPP_VGPIO_33, NONE, DEEP, NF3),
|
||||
/* SSP2_SCLK */
|
||||
PAD_CFG_NF(GPP_VGPIO_34, NONE, DEEP, NF1),
|
||||
/* SSP2_SFRM */
|
||||
PAD_CFG_NF(GPP_VGPIO_35, NONE, DEEP, NF1),
|
||||
/* SSP_TXD */
|
||||
PAD_CFG_NF(GPP_VGPIO_36, NONE, DEEP, NF1),
|
||||
/* SSP_RXD */
|
||||
PAD_CFG_NF(GPP_VGPIO_37, NONE, DEEP, NF1),
|
||||
};
|
||||
|
||||
/* Early pad configuration in bootblock for guren */
|
||||
static const struct pad_config early_gpio_table[] = {
|
||||
/* F12 : GSXDOUT ==> WWAN_RST_L */
|
||||
PAD_CFG_GPO(GPP_F12, 0, DEEP),
|
||||
/* H12 : UART0_RTS# ==> SD_PERST_L */
|
||||
PAD_CFG_GPO(GPP_H12, 0, DEEP),
|
||||
/* A13 : GPP_A13 ==> GSC_SOC_INT_ODL */
|
||||
PAD_CFG_GPI_APIC(GPP_A13, NONE, PLTRST, LEVEL, INVERT),
|
||||
/* D6 : SRCCLKREQ1# ==> WWAN_EN */
|
||||
PAD_CFG_GPO(GPP_D6, 1, DEEP),
|
||||
/* E12 : THC0_SPI1_IO1 ==> SOC_WP_OD */
|
||||
PAD_CFG_GPI_GPIO_DRIVER(GPP_E12, NONE, DEEP),
|
||||
/* F18 : THC1_SPI2_INT# ==> EC_IN_RW_OD */
|
||||
PAD_CFG_GPI(GPP_F18, NONE, DEEP),
|
||||
/* H4 : I2C0_SDA ==> SOC_I2C_GSC_SDA */
|
||||
PAD_CFG_NF(GPP_H4, NONE, DEEP, NF1),
|
||||
/* H5 : I2C0_SCL ==> SOC_I2C_GSC_SCL */
|
||||
PAD_CFG_NF(GPP_H5, NONE, DEEP, NF1),
|
||||
/* H10 : UART0_RXD ==> UART_SOC_RX_DBG_TX */
|
||||
PAD_CFG_NF(GPP_H10, NONE, DEEP, NF2),
|
||||
/* H11 : UART0_TXD ==> UART_SOC_TX_DBG_RX */
|
||||
PAD_CFG_NF(GPP_H11, NONE, DEEP, NF2),
|
||||
/* H13 : UART0_CTS# ==> EN_PP3300_SD_X */
|
||||
PAD_CFG_GPO(GPP_H13, 1, DEEP),
|
||||
};
|
||||
|
||||
static const struct pad_config romstage_gpio_table[] = {
|
||||
/* Enable touchscreen, hold in reset */
|
||||
/* C0 : SMBCLK ==> EN_PP3300_TCHSCR */
|
||||
PAD_CFG_GPO(GPP_C0, 1, DEEP),
|
||||
/* C1 : SMBDATA ==> USI_RST_L */
|
||||
PAD_CFG_GPO(GPP_C1, 0, DEEP),
|
||||
/* C6 : SML1CLK ==> TCHSCR_REPORT_EN */
|
||||
PAD_CFG_GPO(GPP_C6, 0, DEEP),
|
||||
/* H12 : UART0_RTS# ==> SD_PERST_L */
|
||||
PAD_CFG_GPO(GPP_H12, 1, DEEP),
|
||||
};
|
||||
|
||||
const struct pad_config *variant_gpio_override_table(size_t *num)
|
||||
{
|
||||
*num = ARRAY_SIZE(override_gpio_table);
|
||||
return override_gpio_table;
|
||||
}
|
||||
|
||||
const struct pad_config *variant_early_gpio_table(size_t *num)
|
||||
{
|
||||
*num = ARRAY_SIZE(early_gpio_table);
|
||||
return early_gpio_table;
|
||||
}
|
||||
|
||||
|
||||
const struct pad_config *variant_romstage_gpio_table(size_t *num)
|
||||
{
|
||||
*num = ARRAY_SIZE(romstage_gpio_table);
|
||||
return romstage_gpio_table;
|
||||
}
|
||||
|
|
@ -5,4 +5,8 @@
|
|||
|
||||
#include <baseboard/gpio.h>
|
||||
|
||||
#define WWAN_FCPO GPP_D6
|
||||
#define WWAN_RST GPP_F12
|
||||
#define T2_OFF_MS 20
|
||||
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -1,6 +1,634 @@
|
|||
chip soc/intel/alderlake
|
||||
|
||||
device domain 0 on
|
||||
end
|
||||
|
||||
fw_config
|
||||
field THERMAL_SOLUTION 0
|
||||
option THERMAL_SOLUTION_PASSIVE 0
|
||||
option THERMAL_SOLUTION_ACTIVE 1
|
||||
end
|
||||
field DB_USB 5 8
|
||||
option DB_NONE 0
|
||||
option DB_1C 1
|
||||
option DB_1A 2
|
||||
option DB_1C_1A 3
|
||||
option DB_1C_LTE 4
|
||||
option DB_HDMI_LTE 5
|
||||
end
|
||||
field SD_CARD 9
|
||||
option SD_ABSENT 0
|
||||
option SD_GL9750S 1
|
||||
end
|
||||
field WIFI_SAR_ID 11 13
|
||||
option WIFI_SAR_ID_INTEL_CONVERTIBLE 0
|
||||
option WIFI_SAR_ID_INTEL_CLAMSHELL 1
|
||||
end
|
||||
field TOUCHSCREEN_SOURCE 32 34
|
||||
option TOUCHSCREEN_UNPROVISIONED 0
|
||||
option TOUCHSCREEN_ELAN0001 1
|
||||
end
|
||||
end
|
||||
|
||||
chip soc/intel/alderlake
|
||||
register "sagv" = "SaGv_Enabled"
|
||||
|
||||
# EMMC Tx CMD Delay
|
||||
# Refer to EDS-Vol2-42.3.7.
|
||||
# [14:8] steps of delay for DDR mode, each 125ps, range: 0 - 39.
|
||||
# [6:0] steps of delay for SDR mode, each 125ps, range: 0 - 39.
|
||||
register "common_soc_config.emmc_dll.emmc_tx_cmd_cntl" = "0x505"
|
||||
|
||||
# EMMC TX DATA Delay 1
|
||||
# Refer to EDS-Vol2-42.3.8.
|
||||
# [14:8] steps of delay for HS400, each 125ps, range: 0 - 78.
|
||||
# [6:0] steps of delay for SDR104/HS200, each 125ps, range: 0 - 79.
|
||||
register "common_soc_config.emmc_dll.emmc_tx_data_cntl1" = "0x909"
|
||||
|
||||
# EMMC TX DATA Delay 2
|
||||
# Refer to EDS-Vol2-42.3.9.
|
||||
# [30:24] steps of delay for SDR50, each 125ps, range: 0 - 79.
|
||||
# [22:16] steps of delay for DDR50, each 125ps, range: 0 - 78.
|
||||
# [14:8] steps of delay for SDR25/HS50, each 125ps, range: 0 -79.
|
||||
# [6:0] steps of delay for SDR12, each 125ps. Range: 0 - 79.
|
||||
register "common_soc_config.emmc_dll.emmc_tx_data_cntl2" = "0x1C2A2828"
|
||||
|
||||
# EMMC RX CMD/DATA Delay 1
|
||||
# Refer to EDS-Vol2-42.3.10.
|
||||
# [30:24] steps of delay for SDR50, each 125ps, range: 0 - 119.
|
||||
# [22:16] steps of delay for DDR50, each 125ps, range: 0 - 78.
|
||||
# [14:8] steps of delay for SDR25/HS50, each 125ps, range: 0 - 119.
|
||||
# [6:0] steps of delay for SDR12, each 125ps, range: 0 - 119.
|
||||
register "common_soc_config.emmc_dll.emmc_rx_cmd_data_cntl1" = "0x1C1B4F1B"
|
||||
|
||||
# EMMC RX CMD/DATA Delay 2
|
||||
# Refer to EDS-Vol2-42.3.12.
|
||||
# [17:16] stands for Rx Clock before Output Buffer,
|
||||
# 00: Rx clock after output buffer,
|
||||
# 01: Rx clock before output buffer,
|
||||
# 10: Automatic selection based on working mode.
|
||||
# 11: Reserved
|
||||
# [14:8] steps of delay for Auto Tuning Mode, each 125ps, range: 0 - 39.
|
||||
# [6:0] steps of delay for HS200, each 125ps, range: 0 - 79.
|
||||
register "common_soc_config.emmc_dll.emmc_rx_cmd_data_cntl2" = "0x10048"
|
||||
|
||||
# EMMC Rx Strobe Delay
|
||||
# Refer to EDS-Vol2-42.3.11.
|
||||
# [14:8] Rx Strobe Delay DLL 1(HS400 Mode), each 125ps, range: 0 - 39.
|
||||
# [6:0] Rx Strobe Delay DLL 2(HS400 Mode), each 125ps, range: 0 - 39.
|
||||
register "common_soc_config.emmc_dll.emmc_rx_strobe_cntl" = "0x01515"
|
||||
|
||||
# SOC Aux orientation override:
|
||||
# This is a bitfield that corresponds to up to 4 TCSS ports.
|
||||
# Bits (0,1) allocated for TCSS Port1 configuration and Bits (2,3)for TCSS Port2.
|
||||
# TcssAuxOri = 0101b
|
||||
# Bit0,Bit2 set to "1" indicates no retimer on USBC Ports
|
||||
# Bit1,Bit3 set to "0" indicates Aux lines are not swapped on the
|
||||
# motherboard to USBC connector
|
||||
register "tcss_aux_ori" = "5"
|
||||
|
||||
register "typec_aux_bias_pads[0]" = "{.pad_auxp_dc = GPP_E22, .pad_auxn_dc = GPP_E23}"
|
||||
register "typec_aux_bias_pads[1]" = "{.pad_auxp_dc = GPP_A21, .pad_auxn_dc = GPP_A22}"
|
||||
|
||||
register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth port for CNVi WLAN
|
||||
|
||||
# Configure external V1P05/Vnn/VnnSx Rails
|
||||
register "ext_fivr_settings" = "{
|
||||
.configure_ext_fivr = 1,
|
||||
.v1p05_enable_bitmap = FIVR_ENABLE_ALL_SX & ~FIVR_ENABLE_S0,
|
||||
.vnn_enable_bitmap = FIVR_ENABLE_ALL_SX,
|
||||
.vnn_sx_enable_bitmap = FIVR_ENABLE_ALL_SX,
|
||||
.v1p05_supported_voltage_bitmap = FIVR_VOLTAGE_NORMAL,
|
||||
.vnn_supported_voltage_bitmap = FIVR_VOLTAGE_MIN_ACTIVE,
|
||||
.v1p05_voltage_mv = 1050,
|
||||
.vnn_voltage_mv = 780,
|
||||
.vnn_sx_voltage_mv = 1050,
|
||||
.v1p05_icc_max_ma = 500,
|
||||
.vnn_icc_max_ma = 500,
|
||||
}"
|
||||
|
||||
# Enable the Cnvi BT Audio Offload
|
||||
register "cnvi_bt_audio_offload" = "1"
|
||||
|
||||
# Intel Common SoC Config
|
||||
#+-------------------+---------------------------+
|
||||
#| Field | Value |
|
||||
#+-------------------+---------------------------+
|
||||
#| I2C0 | TPM. Early init is |
|
||||
#| | required to set up a BAR |
|
||||
#| | for TPM communication |
|
||||
#| I2C1 | Touchscreen |
|
||||
#| I2C2 | Sub-board(PSensor)/WCAM |
|
||||
#| I2C3 | Audio |
|
||||
#| I2C5 | Trackpad |
|
||||
#+-------------------+---------------------------+
|
||||
register "common_soc_config" = "{
|
||||
.i2c[0] = {
|
||||
.early_init = 1,
|
||||
.speed = I2C_SPEED_FAST_PLUS,
|
||||
.speed_config[0] = {
|
||||
.speed = I2C_SPEED_FAST_PLUS,
|
||||
.scl_lcnt = 55,
|
||||
.scl_hcnt = 30,
|
||||
.sda_hold = 7,
|
||||
}
|
||||
},
|
||||
.i2c[1] = {
|
||||
.speed = I2C_SPEED_FAST,
|
||||
.speed_config[0] = {
|
||||
.speed = I2C_SPEED_FAST,
|
||||
.scl_lcnt = 157,
|
||||
.scl_hcnt = 79,
|
||||
.sda_hold = 40,
|
||||
}
|
||||
},
|
||||
.i2c[2] = {
|
||||
.speed = I2C_SPEED_FAST,
|
||||
.speed_config[0] = {
|
||||
.speed = I2C_SPEED_FAST,
|
||||
.scl_lcnt = 157,
|
||||
.scl_hcnt = 79,
|
||||
.sda_hold = 7,
|
||||
}
|
||||
},
|
||||
.i2c[3] = {
|
||||
.speed = I2C_SPEED_FAST,
|
||||
.speed_config[0] = {
|
||||
.speed = I2C_SPEED_FAST,
|
||||
.scl_lcnt = 158,
|
||||
.scl_hcnt = 79,
|
||||
.sda_hold = 7,
|
||||
}
|
||||
},
|
||||
.i2c[5] = {
|
||||
.speed = I2C_SPEED_FAST,
|
||||
.speed_config[0] = {
|
||||
.speed = I2C_SPEED_FAST,
|
||||
.scl_lcnt = 158,
|
||||
.scl_hcnt = 79,
|
||||
.sda_hold = 40,
|
||||
}
|
||||
},
|
||||
}"
|
||||
|
||||
device domain 0 on
|
||||
device ref dtt on
|
||||
chip drivers/intel/dptf
|
||||
## sensor information
|
||||
register "options.tsr[0].desc" = ""Memory""
|
||||
register "options.tsr[1].desc" = ""Charger""
|
||||
register "options.tsr[2].desc" = ""Ambient""
|
||||
|
||||
# TODO: below values are initial reference values only
|
||||
## Passive Policy
|
||||
register "policies.passive" = "{
|
||||
[0] = DPTF_PASSIVE(CPU, CPU, 95, 5000),
|
||||
[1] = DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 75, 5000),
|
||||
[2] = DPTF_PASSIVE(CHARGER, TEMP_SENSOR_1, 75, 5000),
|
||||
[3] = DPTF_PASSIVE(CPU, TEMP_SENSOR_2, 75, 5000),
|
||||
}"
|
||||
|
||||
## Critical Policy
|
||||
register "policies.critical" = "{
|
||||
[0] = DPTF_CRITICAL(CPU, 105, SHUTDOWN),
|
||||
[1] = DPTF_CRITICAL(TEMP_SENSOR_0, 85, SHUTDOWN),
|
||||
[2] = DPTF_CRITICAL(TEMP_SENSOR_1, 85, SHUTDOWN),
|
||||
[3] = DPTF_CRITICAL(TEMP_SENSOR_2, 85, SHUTDOWN),
|
||||
}"
|
||||
|
||||
register "controls.power_limits" = "{
|
||||
.pl1 = {
|
||||
.min_power = 3000,
|
||||
.max_power = 6000,
|
||||
.time_window_min = 28 * MSECS_PER_SEC,
|
||||
.time_window_max = 32 * MSECS_PER_SEC,
|
||||
.granularity = 200
|
||||
},
|
||||
.pl2 = {
|
||||
.min_power = 25000,
|
||||
.max_power = 25000,
|
||||
.time_window_min = 1,
|
||||
.time_window_max = 1,
|
||||
.granularity = 1000
|
||||
}
|
||||
}"
|
||||
|
||||
## Charger Performance Control (Control, mA)
|
||||
register "controls.charger_perf" = "{
|
||||
[0] = { 255, 1700 },
|
||||
[1] = { 24, 1500 },
|
||||
[2] = { 16, 1000 },
|
||||
[3] = { 8, 500 }
|
||||
}"
|
||||
|
||||
device generic 0 on
|
||||
probe THERMAL_SOLUTION THERMAL_SOLUTION_PASSIVE
|
||||
end
|
||||
end
|
||||
chip drivers/intel/dptf
|
||||
## sensor information
|
||||
register "options.tsr[0].desc" = ""Memory""
|
||||
register "options.tsr[1].desc" = ""Charger""
|
||||
register "options.tsr[2].desc" = ""Ambient""
|
||||
|
||||
# TODO: below values are initial reference values only
|
||||
## Active Policy
|
||||
register "policies.active" = "{
|
||||
[0] = {
|
||||
.target = DPTF_CPU,
|
||||
.thresholds = {
|
||||
TEMP_PCT(85, 90),
|
||||
TEMP_PCT(80, 80),
|
||||
TEMP_PCT(75, 70),
|
||||
TEMP_PCT(70, 50),
|
||||
TEMP_PCT(65, 30),
|
||||
}
|
||||
},
|
||||
[1] = {
|
||||
.target = DPTF_TEMP_SENSOR_2,
|
||||
.thresholds = {
|
||||
TEMP_PCT(50, 90),
|
||||
TEMP_PCT(48, 70),
|
||||
TEMP_PCT(46, 60),
|
||||
TEMP_PCT(43, 40),
|
||||
TEMP_PCT(40, 30),
|
||||
}
|
||||
}
|
||||
}"
|
||||
|
||||
# TODO: below values are initial reference values only
|
||||
## Passive Policy
|
||||
register "policies.passive" = "{
|
||||
[0] = DPTF_PASSIVE(CPU, CPU, 95, 5000),
|
||||
[1] = DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 75, 5000),
|
||||
[2] = DPTF_PASSIVE(CHARGER, TEMP_SENSOR_1, 75, 5000),
|
||||
[3] = DPTF_PASSIVE(CPU, TEMP_SENSOR_2, 75, 5000),
|
||||
}"
|
||||
|
||||
## Critical Policy
|
||||
register "policies.critical" = "{
|
||||
[0] = DPTF_CRITICAL(CPU, 105, SHUTDOWN),
|
||||
[1] = DPTF_CRITICAL(TEMP_SENSOR_0, 85, SHUTDOWN),
|
||||
[2] = DPTF_CRITICAL(TEMP_SENSOR_1, 85, SHUTDOWN),
|
||||
[3] = DPTF_CRITICAL(TEMP_SENSOR_2, 85, SHUTDOWN),
|
||||
}"
|
||||
|
||||
register "controls.power_limits" = "{
|
||||
.pl1 = {
|
||||
.min_power = 12000,
|
||||
.max_power = 15000,
|
||||
.time_window_min = 28 * MSECS_PER_SEC,
|
||||
.time_window_max = 32 * MSECS_PER_SEC,
|
||||
.granularity = 200
|
||||
},
|
||||
.pl2 = {
|
||||
.min_power = 35000,
|
||||
.max_power = 35000,
|
||||
.time_window_min = 1,
|
||||
.time_window_max = 1,
|
||||
.granularity = 1000
|
||||
}
|
||||
}"
|
||||
|
||||
## Charger Performance Control (Control, mA)
|
||||
register "controls.charger_perf" = "{
|
||||
[0] = { 255, 1700 },
|
||||
[1] = { 24, 1500 },
|
||||
[2] = { 16, 1000 },
|
||||
[3] = { 8, 500 }
|
||||
}"
|
||||
|
||||
## Fan Performance Control (Percent, Speed, Noise, Power)
|
||||
register "controls.fan_perf" = "{
|
||||
[0] = { 100, 6000, 220, 2200, },
|
||||
[1] = { 92, 5500, 180, 1800, },
|
||||
[2] = { 85, 5000, 145, 1450, },
|
||||
[3] = { 70, 4400, 115, 1150, },
|
||||
[4] = { 56, 3900, 90, 900, },
|
||||
[5] = { 45, 3300, 55, 550, },
|
||||
[6] = { 38, 3000, 30, 300, },
|
||||
[7] = { 33, 2900, 15, 150, },
|
||||
[8] = { 10, 800, 10, 100, },
|
||||
[9] = { 0, 0, 0, 50, }
|
||||
}"
|
||||
|
||||
## Fan options
|
||||
register "options.fan.fine_grained_control" = "true"
|
||||
register "options.fan.step_size" = "2"
|
||||
|
||||
device generic 1 on
|
||||
probe THERMAL_SOLUTION THERMAL_SOLUTION_ACTIVE
|
||||
end
|
||||
end
|
||||
end
|
||||
device ref cnvi_wifi on
|
||||
chip drivers/wifi/generic
|
||||
register "enable_cnvi_ddr_rfim" = "true"
|
||||
device generic 0 on end
|
||||
end
|
||||
end
|
||||
device ref i2c1 on
|
||||
chip drivers/i2c/generic
|
||||
register "hid" = ""ELAN0001""
|
||||
register "desc" = ""ELAN Touchscreen""
|
||||
register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)"
|
||||
register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)"
|
||||
register "reset_delay_ms" = "20"
|
||||
register "reset_off_delay_ms" = "4"
|
||||
register "stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)"
|
||||
register "stop_delay_ms" = "5"
|
||||
register "stop_off_delay_ms" = "25"
|
||||
register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)"
|
||||
register "enable_delay_ms" = "25"
|
||||
register "has_power_resource" = "true"
|
||||
device i2c 10 on
|
||||
probe TOUCHSCREEN_SOURCE TOUCHSCREEN_ELAN0001
|
||||
end
|
||||
end
|
||||
|
||||
end #I2C1
|
||||
device ref i2c2 on
|
||||
chip drivers/i2c/sx9324
|
||||
register "desc" = ""SAR Proximity Sensor""
|
||||
register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_H19_IRQ)"
|
||||
register "speed" = "I2C_SPEED_FAST"
|
||||
register "uid" = "1"
|
||||
register "reg_gnrl_ctrl0" = "0x16"
|
||||
register "reg_gnrl_ctrl1" = "0x21"
|
||||
register "reg_afe_ctrl0" = "0x20"
|
||||
register "reg_afe_ctrl3" = "0x00"
|
||||
register "reg_afe_ctrl4" = "0x46"
|
||||
register "reg_afe_ctrl6" = "0x00"
|
||||
register "reg_afe_ctrl7" = "0x46"
|
||||
register "reg_afe_ph0" = "0x3d"
|
||||
register "reg_afe_ph1" = "0x1b"
|
||||
register "reg_afe_ph2" = "0x1f"
|
||||
register "reg_afe_ph3" = "0x3d"
|
||||
register "reg_afe_ctrl8" = "0x12"
|
||||
register "reg_afe_ctrl9" = "0x08"
|
||||
register "reg_prox_ctrl0" = "0x0b"
|
||||
register "reg_prox_ctrl1" = "0x0b"
|
||||
register "reg_prox_ctrl2" = "0x20"
|
||||
register "reg_prox_ctrl3" = "0x20"
|
||||
register "reg_prox_ctrl4" = "0x0c"
|
||||
register "reg_prox_ctrl5" = "0x00"
|
||||
register "reg_prox_ctrl6" = "0x20"
|
||||
register "reg_prox_ctrl7" = "0xc0"
|
||||
register "reg_adv_ctrl0" = "0x00"
|
||||
register "reg_adv_ctrl1" = "0x00"
|
||||
register "reg_adv_ctrl2" = "0x00"
|
||||
register "reg_adv_ctrl3" = "0x00"
|
||||
register "reg_adv_ctrl4" = "0x00"
|
||||
register "reg_adv_ctrl5" = "0x05"
|
||||
register "reg_adv_ctrl6" = "0x00"
|
||||
register "reg_adv_ctrl7" = "0x00"
|
||||
register "reg_adv_ctrl8" = "0x00"
|
||||
register "reg_adv_ctrl9" = "0x00"
|
||||
register "reg_adv_ctrl10" = "0x00"
|
||||
register "reg_adv_ctrl11" = "0x00"
|
||||
register "reg_adv_ctrl12" = "0x00"
|
||||
register "reg_adv_ctrl13" = "0x00"
|
||||
register "reg_adv_ctrl14" = "0x80"
|
||||
register "reg_adv_ctrl15" = "0x0c"
|
||||
register "reg_adv_ctrl16" = "0x04"
|
||||
register "reg_adv_ctrl17" = "0x70"
|
||||
register "reg_adv_ctrl18" = "0x20"
|
||||
register "reg_adv_ctrl19" = "0x00"
|
||||
register "reg_adv_ctrl20" = "0x00"
|
||||
register "reg_irq_msk" = "0x60"
|
||||
register "reg_irq_cfg0" = "0x00"
|
||||
register "reg_irq_cfg1" = "0x80"
|
||||
register "reg_irq_cfg2" = "0x00"
|
||||
|
||||
register "ph0_pin" = "{1, 3, 3}"
|
||||
register "ph1_pin" = "{3, 2, 1}"
|
||||
register "ph2_pin" = "{3, 3, 1}"
|
||||
register "ph3_pin" = "{1, 3, 3}"
|
||||
register "ph01_resolution" = "512"
|
||||
register "ph23_resolution" = "512"
|
||||
register "startup_sensor" = "1"
|
||||
register "ph01_proxraw_strength" = "3"
|
||||
register "ph23_proxraw_strength" = "3"
|
||||
register "avg_pos_strength" = "256"
|
||||
register "cs_idle_sleep" = ""gnd""
|
||||
register "int_comp_resistor" = ""lowest""
|
||||
register "input_precharge_resistor_ohms" = "4000"
|
||||
register "input_analog_gain" = "1"
|
||||
device i2c 28 on
|
||||
probe DB_USB DB_1C_LTE
|
||||
probe DB_USB DB_HDMI_LTE
|
||||
end
|
||||
end
|
||||
end #I2C2
|
||||
device ref i2c3 on
|
||||
chip drivers/i2c/generic
|
||||
register "hid" = ""10EC5650""
|
||||
register "name" = ""RT58""
|
||||
register "desc" = ""Realtek RT5650""
|
||||
register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_A23)"
|
||||
register "property_count" = "1"
|
||||
register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
|
||||
register "property_list[0].name" = ""realtek,jd-mode""
|
||||
register "property_list[0].integer" = "2"
|
||||
device i2c 1a on end
|
||||
end
|
||||
end #I2C3
|
||||
device ref i2c5 on
|
||||
chip drivers/i2c/generic
|
||||
register "hid" = ""ELAN0000""
|
||||
register "desc" = ""ELAN Touchpad""
|
||||
register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F14_IRQ)"
|
||||
register "wake" = "GPE0_DW2_14"
|
||||
register "detect" = "1"
|
||||
device i2c 15 on end
|
||||
end
|
||||
chip drivers/i2c/hid
|
||||
register "generic.hid" = ""PNP0C50""
|
||||
register "generic.desc" = ""PIXART Touchpad""
|
||||
register "generic.irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F14_IRQ)"
|
||||
register "generic.wake" = "GPE0_DW2_14"
|
||||
register "generic.detect" = "1"
|
||||
register "hid_desc_reg_offset" = "0x20"
|
||||
device i2c 2c on end
|
||||
end
|
||||
end #I2C5
|
||||
device ref pcie_rp4 on
|
||||
# Enable wlan PCIe 4 using clk 2
|
||||
register "pch_pcie_rp[PCH_RP(4)]" = "{
|
||||
.clk_src = 2,
|
||||
.clk_req = 2,
|
||||
.flags = PCIE_RP_LTR | PCIE_RP_AER,
|
||||
}"
|
||||
chip drivers/wifi/generic
|
||||
register "add_acpi_dma_property" = "true"
|
||||
device pci 00.0 on end
|
||||
end
|
||||
end
|
||||
device ref pcie_rp7 on
|
||||
# Enable SD Card PCIe 7 using clk 3
|
||||
register "pch_pcie_rp[PCH_RP(7)]" = "{
|
||||
.clk_src = 3,
|
||||
.clk_req = 3,
|
||||
.flags = PCIE_RP_HOTPLUG | PCIE_RP_LTR | PCIE_RP_AER,
|
||||
}"
|
||||
chip soc/intel/common/block/pcie/rtd3
|
||||
register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_H13)"
|
||||
register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_H12)"
|
||||
register "srcclk_pin" = "3"
|
||||
device generic 0 on end
|
||||
end
|
||||
probe SD_CARD SD_GL9750S
|
||||
end
|
||||
device ref emmc on
|
||||
probe STORAGE STORAGE_EMMC
|
||||
end
|
||||
device ref ish on
|
||||
chip drivers/intel/ish
|
||||
register "add_acpi_dma_property" = "true"
|
||||
device generic 0 on end
|
||||
end
|
||||
probe STORAGE STORAGE_UFS
|
||||
end
|
||||
device ref ufs on
|
||||
probe STORAGE STORAGE_UFS
|
||||
end
|
||||
device ref pch_espi on
|
||||
chip ec/google/chromeec
|
||||
use conn0 as mux_conn[0]
|
||||
use conn1 as mux_conn[1]
|
||||
device pnp 0c09.0 on end
|
||||
end
|
||||
end
|
||||
device ref pmc hidden
|
||||
chip drivers/intel/pmc_mux
|
||||
device generic 0 on
|
||||
chip drivers/intel/pmc_mux/conn
|
||||
use usb2_port1 as usb2_port
|
||||
use tcss_usb3_port1 as usb3_port
|
||||
device generic 0 alias conn0 on end
|
||||
end
|
||||
chip drivers/intel/pmc_mux/conn
|
||||
use usb2_port2 as usb2_port
|
||||
use tcss_usb3_port2 as usb3_port
|
||||
device generic 1 alias conn1 on
|
||||
probe DB_USB DB_1C
|
||||
probe DB_USB DB_1A
|
||||
probe DB_USB DB_1C_1A
|
||||
probe DB_USB DB_1C_LTE
|
||||
end
|
||||
end
|
||||
end
|
||||
end
|
||||
end
|
||||
device ref tcss_xhci on
|
||||
chip drivers/usb/acpi
|
||||
device ref tcss_root_hub on
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB3 Type-C Port C0 (MLB)""
|
||||
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
|
||||
register "use_custom_pld" = "true"
|
||||
register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(1, 1))"
|
||||
device ref tcss_usb3_port1 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB3 Type-C Port C1 (DB)""
|
||||
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
|
||||
register "use_custom_pld" = "true"
|
||||
register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, RIGHT, ACPI_PLD_GROUP(2, 1))"
|
||||
device ref tcss_usb3_port2 on
|
||||
probe DB_USB DB_1C
|
||||
probe DB_USB DB_1C_1A
|
||||
probe DB_USB DB_1C_LTE
|
||||
end
|
||||
end
|
||||
end
|
||||
end
|
||||
end
|
||||
device ref xhci on
|
||||
chip drivers/usb/acpi
|
||||
device ref xhci_root_hub on
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB2 Type-C Port C0 (MLB)""
|
||||
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
|
||||
register "use_custom_pld" = "true"
|
||||
register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(1, 1))"
|
||||
device ref usb2_port1 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB2 Type-C Port C1 (DB)""
|
||||
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
|
||||
register "use_custom_pld" = "true"
|
||||
register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, RIGHT, ACPI_PLD_GROUP(2, 1))"
|
||||
device ref usb2_port2 on
|
||||
probe DB_USB DB_1C
|
||||
probe DB_USB DB_1C_1A
|
||||
probe DB_USB DB_1C_LTE
|
||||
end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB2 Type-A Port A0 (MLB)""
|
||||
register "type" = "UPC_TYPE_A"
|
||||
register "use_custom_pld" = "true"
|
||||
register "custom_pld" = "ACPI_PLD_TYPE_A(LEFT, RIGHT, ACPI_PLD_GROUP(3, 1))"
|
||||
device ref usb2_port3 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB2 Type-A Port A1 (DB)""
|
||||
register "type" = "UPC_TYPE_A"
|
||||
register "use_custom_pld" = "true"
|
||||
register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, LEFT, ACPI_PLD_GROUP(4, 1))"
|
||||
device ref usb2_port4 on
|
||||
probe DB_USB DB_1A
|
||||
probe DB_USB DB_1C_1A
|
||||
end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB2 WWAN""
|
||||
register "type" = "UPC_TYPE_INTERNAL"
|
||||
device ref usb2_port4 on
|
||||
probe DB_USB DB_1C_LTE
|
||||
probe DB_USB DB_HDMI_LTE
|
||||
end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB2 Camera""
|
||||
register "type" = "UPC_TYPE_INTERNAL"
|
||||
device ref usb2_port6 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB2 Camera""
|
||||
register "type" = "UPC_TYPE_INTERNAL"
|
||||
device ref usb2_port7 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB2 Bluetooth""
|
||||
register "type" = "UPC_TYPE_INTERNAL"
|
||||
register "reset_gpio" =
|
||||
"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D4)"
|
||||
device ref usb2_port8 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB3 Type-A Port A0 (MLB)""
|
||||
register "type" = "UPC_TYPE_USB3_A"
|
||||
register "use_custom_pld" = "true"
|
||||
register "custom_pld" = "ACPI_PLD_TYPE_A(LEFT, RIGHT, ACPI_PLD_GROUP(3, 1))"
|
||||
device ref usb3_port1 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB3 Type-A Port A1 (DB)""
|
||||
register "type" = "UPC_TYPE_USB3_A"
|
||||
register "use_custom_pld" = "true"
|
||||
register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, LEFT, ACPI_PLD_GROUP(4, 1))"
|
||||
device ref usb3_port2 on
|
||||
probe DB_USB DB_1A
|
||||
probe DB_USB DB_1C_1A
|
||||
end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB3 WWAN""
|
||||
register "type" = "UPC_TYPE_INTERNAL"
|
||||
device ref usb3_port2 on
|
||||
probe DB_USB DB_1C_LTE
|
||||
probe DB_USB DB_HDMI_LTE
|
||||
end
|
||||
end
|
||||
end
|
||||
end
|
||||
end
|
||||
end
|
||||
end
|
||||
|
|
|
|||
9
src/mainboard/google/brya/variants/guren/ramstage.c
Normal file
9
src/mainboard/google/brya/variants/guren/ramstage.c
Normal file
|
|
@ -0,0 +1,9 @@
|
|||
/* SPDX-License-Identifier: GPL-2.0-or-later */
|
||||
|
||||
#include <soc/ramstage.h>
|
||||
|
||||
void mainboard_silicon_init_params(FSP_S_CONFIG *params)
|
||||
{
|
||||
params->VccInAuxImonIccImax = 100; // 25 * 4 for ADL-N
|
||||
printk(BIOS_INFO, "Override VccInAuxImonIccImax = %d\n", params->VccInAuxImonIccImax);
|
||||
}
|
||||
19
src/mainboard/google/brya/variants/guren/variant.c
Normal file
19
src/mainboard/google/brya/variants/guren/variant.c
Normal file
|
|
@ -0,0 +1,19 @@
|
|||
/* SPDX-License-Identifier: GPL-2.0-only */
|
||||
|
||||
#include <baseboard/variants.h>
|
||||
#include <chip.h>
|
||||
#include <fw_config.h>
|
||||
#include <sar.h>
|
||||
|
||||
const char *get_wifi_sar_cbfs_filename(void)
|
||||
{
|
||||
return get_wifi_sar_fw_config_filename(FW_CONFIG_FIELD(WIFI_SAR_ID));
|
||||
}
|
||||
|
||||
void variant_update_soc_chip_config(struct soc_intel_alderlake_config *config)
|
||||
{
|
||||
if (fw_config_probe(FW_CONFIG(DB_USB, DB_HDMI_LTE))) {
|
||||
printk(BIOS_INFO, "Enable DDI PORT 2 for HPD and DDC.\n");
|
||||
config->ddi_ports_config[DDI_PORT_2] = DDI_ENABLE_HPD | DDI_ENABLE_DDC;
|
||||
}
|
||||
}
|
||||
Loading…
Add table
Add a link
Reference in a new issue